Description
Included in this kit
This bundle includes a Hertz CP-5.1K Five Channel Car Audio Amplifier, a Hertz Cento Pro Series CPK-165 6.5" Two-Way Component System, a Hertz Cento Pro Series CPX-165 6.5" Two-Way Coaxial Speakers, and a Hertz Mille Pro Shallow MPS 250 S2 Shallow 10 in. (250mm) 2Ω SVC Subwoofer incl. grille.
1x Hertz CP-5.1K Five Channel Car Audio Amplifier (CP-5.1K)
Discover the essence of car audio excellence with the Hertz CENTO POWER CP 5.1K. This five-channel amplifier is certified for Hi-Res Audio, ensuring a frequency response from 10 Hz to 41 kHz, for the most authentic listening experience. Boasting an efficiency greater than 85% within its compact, aluminum diecast casing, the CP 5.1K is fully bridgeable and offers full Ready to Plug connectivity for effortless installation. With its adjustable input levels and comprehensive control set, this model is perfect for those who demand superior sound quality and aesthetic refinement in their vehicle’s audio system.
General Specs
Channels: 5 - 3
Amp class: D
POWER SUPPLY
Nominal power supply voltage (fuse): 11 ÷ 15 VDC (2 x 30 A)
Operating power supply voltage: 9 ÷ 18 VDC
Idling current: 1.90 A
Standby current draw: 4 uA
Consumption, MIN load impedance (Max Musical Power): 48 A
Remote IN: 4 ÷ 17 VDC (1 mA)
ART - Automatic Remote Turn on/off from SPK-IN (BTL radio only): 1.5 VDC
Efficiency: 83%
AMPLIFIER STAGE
Distortion - THD @ 100 Hz, 70% Rated Power: 0,01 % (F/R Ch) - 0,06 % (SUB Ch)
Damping factor @ 1 kHz, 1W: 160 (F/R Ch) - 180 (SUB Ch)
Bandwidth @ -3 dB: 10Hz ÷ 47kHz (F/R Ch) - 10Hz ÷ 500Hz (SUB Ch)
S/N ratio (A-weighted @ 1 V Input): 101 dBA (F/R Ch) - 116 dBA (SUB Ch)
Minimum load impedance
@ 5 Ch: 2 Ω
@ 3 Ch: 4 Ω + 4 Ω + 2 Ω
Adjustable Crossovers: yes INPUTS / FILTERS
Inputs: Pre-In / Speaker-In
Pre Out: Full Range (Front)
Pre-In sensitivity: 0.32 ÷ 8 VRMS
Speaker-In sensitivity: 1.6 ÷ 40 VRMS
Front Ch Hi-Pass: Full / 50-5000Hz 12dB/Oct.
Rear Ch Lo-Pass: Full / 50-5000Hz 12dB/Oct.
Sub Ch Lo-Pass: 50 ÷ 500 Hz @ 24 dB/Oct.
Bass Boost 50Hz: 0 ÷ 9 dB
Subsonic Hi-Pass: 25 Hz @ 24 dB/Oct.
Sub Remote Volume Control: -20 ÷ 6 dB (Active on Sub Ch) Output Power
Output power (RMS) @ 1% THD:
5Ch @ 4Ω: 80 W x 4 + 330 W x 1
5Ch @ 2Ω: 130 W x 4 + 510 W x 1
3Ch @ 2Ω / 4Ω: 260 W x 2 + 510 W x 1
2Ch @ 4Ω: 260 W x 2 + 320 W x 1
Total Power: 1030 W
1x Hertz Cento Pro Series CPK-165 6.5" Two-Way Component System (CPK-165)
The Hertzaudio Cento Pro CPK 165 PRO car audio system includes the CP 165 woofer and the CP 25 tweeter with Tetolon dome and 25 mm voice coil, features ensuring a very wide and linear frequency response. The CP 25 employs the “Center Tuning Duct” technology: the tunnel at the center of the powerful Neodymium magnetic circuit, ensures low-temperature air exchange between the dome and the rear loading chamber, perfectly tuning the acoustics. The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage.
Features -
• Soft 29 mm Tetolon fiber dome, for a natural as well as detailed reproduction of music nuances.
• “Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.
• Pressed paper cone with FEM-optimized geometry combining rigidity and lightness for color-free sound.
• High density ferrite magnet in combination with low carbon polar plates for a reduced distortion at high power levels.
• Tweeter level adjustable via a three-position switch (-2, 0, +2 dB) for optimized and customizable timbre balance.
Specifications -
• Power Handling - Peak W: 315
• Power Handling - Continuous W: 105
• Impedance Ω: 4
• Frequency response Hz: 45 ÷ 22,5k
• Sensitivity dB SPL: 92,5
• Voice coil Ø mm (in.): 25 (1)
• Woofer size mm (in.): 165 (6.5)
• Tweeter size mm (in.): 29 (1.14)
1x Hertz Cento Pro Series CPX-165 6.5" Two-Way Coaxial Speakers (CPX-165)
The CPX 165 car audio coaxial provides the thrill of listening to the Hertz sound even when the vehicle does not allow the installation of a two-way kit. The Tetolon dome tweeter and Neodymium magnet is provided with off-axis dispersion features and exceptional frequency extension for a detailed, airy sound. Radial Venting System technology ensures unparalleled cooling of the coil thanks to the eight holes at the base of the engine that allow air exchange with the tweeter support. This acts as a rear camera, sized for low Fs, to ensure a natural mid range and allow a low frequency crossover point with the woofer. The pressed-paper cone and the butyl rubber suspension offer an extended low frequency response and an impressive punch. The Mille-inspired design basket features a dampened and protective rubber coated magnet. The grille, available as optional, is made up of a durable high resistance ABS frame and metallic mesh protection.
Features -
• Pressed paper woofer cone with FEM-optimized geometry combining rigidity and lightness for color-free sound.
• High density ferrite magnet in combination with low carbon polar plates for a reduced distortion at high power levels.
• 3-spoke, compact and transparent basket acoustically combined with an anti-vibration rubber magnet cover for an overall damping of spurious vibrations.
• Stylish grille with high resistance ABS plastic frame with metal finish combined with a protective metallic mesh.
Specifications -
• Power Handling - Peak W: 285
• Power Handling - Continuous W: 95
• Impedance Ω: 4
• Frequency response Hz: 45• ÷ 22k
• Sensitivity dB SPL: 92
• Woofer size mm (in.): 165 (6.5)
• Woofer Voice Coil Ø mm (in.): 25 (1)
• Tweeter voice coil Ø mm (in.): 20 (0.8)
1x Hertz Mille Pro Shallow MPS 250 S2 Shallow 10 in. (250mm) 2Ω SVC Subwoofer incl. grille (MPS-250-S2)
Mille PRO shallow subwoofers have been designed to achieve exceptional performance even when there is very little space available to install the subwoofer box.
MPS 300 is optimized to work in ultra-compact sealed boxesstarting from only 22,7 Lt (0.8 Cf). A typical example is a subwoofer enclosure under the rear bench of pickup trucks, where the space - and the height - are limited.
Mille PRO subwoofer have a depth/performance ratio never achieved before thanks to the impressive cone excursion capacity which is 20% higher than a traditional design.
This exceptional target has been achieved thanks to the ingenious suspension group design featuring a dedicated support structure for spider and coil. This solution has allowed to move the magnetic group inwards, reducing the depth and at the same time maximizing cone linear excursion.
Provided with MPS 250 there is a full metal sturdy structure composed by a solid cast aluminium ring and a steel mesh black grille featuring an elegant diamond-cut Hertz Logo.
Technical Specifications -
• Size mm (in.): 300 (12)
• Power Handling - Continuous W: 500
• Power Handling - Peak W: 1000
• Impedance Ohm: 2
• Depth mm (in.): 88 (3.46)
• Voice Coil Type: single
• No Filter Component: Subwoofers
• Voice Coil Ø: 38 (1.5)
• Frequency Response Hz: 25 - 400
• Magnet size D x d x h mm (in.): 156 x 60 x 36 (6.14 x 2.36 x 1.42)
• Weight of one component kg (lb.): 6,64 (14.64)
• Magnet: High density flux ferrite
• Cone: Polypropylene
• Xmech mm (in.): 20 (0.79)