Description
Included in this kit
This bundle includes a JBL PartyBox Two-Person Wireless Handheld Microphone System, a JBL PartyBox-330-B Portable party speaker with futuristic lightshow (White), and a JBL PartyLight-Beam - Bluetooth projection party light that wirelessly syncs with JBL PartyBox speakers.
1x JBL PartyBox Two-Person Wireless Handheld Microphone System (JBLPBWIRELESSMICAM)
Make your next party or event extra memorable with the PartyBox Two-Person Wireless Handheld Microphone System from JBL. The set consists of two handheld microphones and a dual-channel receiver that plugs into the 1/4" mic input on your JBL PartyBox Speaker (available separately). Each microphone features an electret-condenser capsule for a clear, detailed vocal sound while the cardioid pickup pattern focuses audio capture on the singer—helping to reduce potential feedback issues. The dual-channel receiver automatically mixes both microphones together with almost no latency, making duets fun and easy. The mics and receiver both run on built-in rechargeable batteries; the mics will operate for up to 20 hours, and the receiver will operate for up to 12 hours on a single charge.
Easy To Use With All PartyBox Speakers -
• From the PartyBox Encore to the Ultimate, you can use these mics with any JBL PartyBox speakers (available separately).
• Just plug the receiver dongle into the 1/4" mic input on the PartyBox and start singing; it's really that simple.
• The digital wireless dongle provides a stable 2.4 GHz connection within 100' of the PartyBox, so don't be afraid to go out and work the crowd.
Sing Out All Night Long -
• The built-in rechargeable batteries will power the mics for up to 20 hours and the receiver dongle for 12 hours.
• The components all feature USB-C ports for recharging.
• Just plug the mic into the JBL PartyBox's charging port when your battery is running low. You can keep using it while it charges.
• Ten minutes of charging will get you another two hours of playtime.
1x JBL PartyBox-330-B Portable party speaker with futuristic lightshow (White) (PartyBox-330-B)
Bring the party anywhere
Your backyard hangs, basement afters, and all-night ragers will never be the same. The JBL PartyBox 330 is here to bring the deep, punchy bass and crisp highs you crave while its wide soundstage and AI Sound Boost keep sound big, loud, and clear—even when you go full throttle on the volume.
But it’s not just about amazing sound. The JBL PartyBox 330 also sets the vibe. A futuristic lightshow moves to the beat, turning any room into a dance floor, while a refreshed top panel gives you fast access to audio and light effects.
Up to 18 hours of playtime means the music won’t quit before you do. A 10-minute charge adds another 2 hours, or swap in a spare battery (sold separately). Built with a telescopic handle with a secure locking mechanism, wide wheels that can handle grass or sand, and a splashproof design, taking this speaker on the road is effortless.
Technical Specifications
General Specifications
• Power input: AC 100 – 240 V ~ 50 / 60 Hz
• Output power: 280 W RMS (IEC60268)
Audio Specifications
• Transducer:
• 2 × φ165mm(6.5inch)-Effective woofers
• 2 × φ25mm(1inch) PEN dome tweeters
• Frequency response: 40 Hz – 20 kHz(-6dB)
• Signal-to-noise ratio: > 80dB
Control and Connection Specifications
• Input sensitivity:
• Aux-In: 250 mV RMS (3.5 mm connector)
• Mic-In: 20 mV RMS
• Guitar-In: 100 mV RMS
• Bluetooth/USB input: -12 dBFS
• Optical-In: -12 dBFS
• Bluetooth® version: 6.0
• Bluetooth® profile: A2DP V1.4, AVRCP V1.6
• Bluetooth® transmitter frequency range: 2.4 GHz - 2.4835 GHz
• Bluetooth® transmitter power: ≤ 15 dBm (EIRP)
• Bluetooth® transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
• USB format: FAT16, FAT32
• Supported formats: .MP3, .WAV, .FLAC (not available for EMEA region)
• USB-C charge out: 5 V / 1 A
• Cable type: AC power cable (type varies by regions)
What’s in the Box
1 x JBL PartyBox 330
1 x Quick-start guide
1 x Safety Instruction and Warranty Card
AC power cord - quantity and plug type vary by regions
1x JBL PartyLight-Beam - Bluetooth projection party light that wirelessly syncs with JBL PartyBox speakers (PartyLight-Beam)
An unforgettable party doesn't just sound incredible—it should look amazing too. Now you can create your own immersive environment with the JBL PartyLight Beam. This light wirelessly syncs with your JBL PartyBox speakers to project a colorful and kinetic party light—one that's big enough to cover a large room—onto any wall or ceiling. (And if you're partying in an even bigger space, you can sync multiple PartyLight Beams to create a choreographed lightshow in less than a minute.) Adjust the angle to center the light show where you want it and let the vibrant colors match your party's energy throughout the night—from mellow ambient grooves to epic dance beats to the pure delirium of your party's peak energy. Control the adjustable motion, speed, and intensity settings quickly and easily with the JBL One app or PartyBox app. Elevate your party space to the next level with the unbeatable combination of the JBL PartyBox and JBL PartyLight Beam.
General Specifications
LED: RGB x 3; W LED x 4
Power input: 100-240V, 50~60Hz
Power consumption: 22W
Cable type: AC power cable (type varies by regions)
Cable length: 2m/ 6.6ft
Dimensions
Product dimensions (W x H x D): 152 mm x 156 mm x 96 mm / 5.98" x 6.14" x 3.78"
Net weight: 0.92 kg / 2.03 lbs
Packaging dimensions (W x H x D): 221 mm x 221 mm x 181 mm / 8.70" x 8.70" x 7.13"
Gross weight: 1.65 kg / 3.64 lbs
Control and Connection Specifications
Bluetooth® version: 5.3
Bluetooth® transmitter modulation: GFSK
Bluetooth® transmitter frequency range: 2400 MHz - 2483.5 MHz
Bluetooth® transmitter power: < 12 dBm (EIRP)
What's in the box?
1 x JBL PartyLight
1 x Power Cord (*quantity and plug type vary by regions)
1 x Quick start guide
1 x Safety sheet and warranty card