Description
Included in this kit
JL Audio Wake Tower Speaker Package includes M400/4, MX770-ETXv3-SG-WH, Tower Covers, wire kit, and remove volume knob
This bundle includes the following:
- MX770-ETXv3-SG-WH - Enclosed in these beautiful, injection-molded enclosures are our high-performance, MX-Series 7.7-inch coaxial tower speakers.
- M400/4 - This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts to each of its four channels into 2 Ī© (14.4V, 1% THD).
- Acccessories - Bundle comes with JL Audio XMD-WHTAIC2-12:2-Channel 12 ft (3.66 m) Marine Audio Interconnect, JL Audio Marine Remote Bass Controller for MHX and HX amplifiers, JL Audio M770ETX-CVR Neoprene Tower Speaker Cover
Clamps sold separately - Click HERE to find the perfect size for your application.
Need help determining the correct Pipe-Mounting Clamp for your installation?
Download the Pipe-Mounting Clamp Ruler.
Tower Speaker
JL Audio MX Series 7.7-inch Enclosed Tower Coaxial Speaker System Sport White
Enclosed in these beautiful, injection-molded enclosures are our high-performance, MX-Series 7.7-inch coaxial tower speakers. Specifically tuned for tower enclosure applications, these coaxial drivers deliver clean, loud audio that can be heard well beyond the boat when mounted up high. The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our clamp systems (sold separately, and available to fit a wide range of pipe diameters). The wire exits through the center of the mount, staying high and dry, and out of sight. Professional installation is strongly recommended. For best results, we recommend powering these systems with an amplifier in the 25-150 W per channel range. Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.
Amplifier
JL Audio M400/4:4 Ch. Class D Full-Range Marine Amplifier 400 W
This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts to each of its four channels into 2 Ī© (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexDā¢ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
Use the M400/4 in combination with our M600/1 monoblock to build a 1000 W amplification system to power four satellites and a subwoofer... and fit the whole thing under a seat. Or, use the M400/4 by itself to power two satellites, plus a subwoofer. With M-Series amplifier, the possibilities are endless.
This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
| Specifications | |
|---|---|
| Rated Continuous (RMS) Power @ 14.4 V | |
| @ 4 Ī© | 75 W RMS x 4 |
| @ 2 Ī© | 100 W RMS x 4 |
| Bridged @ 4Ī© | 200 W RMS x 2 |
| Rated Continuous (RMS) Power @ 12.5 V | |
| @ 4 Ī© | 60 W RMS x 4 |
| @ 2 Ī© | 90 W RMS x 4 |
| Bridged @ 4Ī© | 180 W RMS x 2 |
| General Specifications | |
| Frequency Response | 12 Hz - 22 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >150 / 50 Hz |
| Damping Factor @ 2 Ī© | >75 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | 100 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 40 A (AFS, AGU or MaxiFuseā¢) |
| Signal Processing | |
| Filter Mode(s) | Low-Pass or High-Pass |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometers | Yes |
| Pass-Through Preamp Output | None |
| Source Channel Selection for PreOuts | N/A |
| Physical Specifications | |
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 8.52 in / 216 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 4.75 lb / 2.15 kg |
Accessories
JL Audio M770ETX-CVR Neoprene Tower Speaker
Having undergone over 1000 hours of salt/fog and UV testing, these durable protective cases are designed to provide stylish but serious protection for M and MX-Series ETX Enclosed Speaker Systems (v2 or v3). Constructed from 3mm Neoprene, each cover is laminated with dark gray spandex and classically finished with a woven āJL Audio / How we playā trim label. This marine-ready material is UV-resistant and features tiny laser-cut holes at the bottom that are just big enough to let water drain out, and purposely small enough to never let insects in. A single, high-quality #5 zipper with locking slider on the front facilitates quick and easy covering or removal. This case is the perfect solution to problematic dust, grime and other environmental agents that can be harmful to your speaker while your boat is docked or trailered. Owners of ETXv2/v3 Enclosed Speaker Systems, these are for you. Protect your investments. Designed to work with any mounting clamp/application.
JL Audio XMD-WHTAIC2-12:2-Channel 12 ft (3.66 m) Marine Audio Interconnect
- 2-channel Marine Audio Interconnect Cable - 12 ft. (3.66 m)
- Twisted-Pair Construction to Reject Noise
- Pure OFC Copper Conductors with Polyethylene Dielectrics
- Molded Connector Bodies
- Machined Brass Connector Elements
JL Audio Marine Remote Bass Controller for MHX and HX amplifiers
Water-Resistant Remote Level Control for HX and MHX Monoblock Amplifiers or any JL Audio Monoblock with a āRemote Bass Controlā port. The M-RBC-1 controls the Bass Level and features a water resistant connection cover designed for use with the JL Audio amplifiers.
Pipe Clamps
Most Commonly Used Clamps
Want to view all the ETXv3 mounting adapters?Click HERE to find the perfect mount for your application.
Need help determining the correct Pipe-Mounting Clamp for your installation?
Download the Pipe-Mounting Clamp Ruler.
