Description
Included in this kit
This bundle includes a JL Audio ACP208LG-W3v3 Amplified MicroSub+ with dual 8W3v3 (slot-ported), and a Kicker 46KISLOC2 K-Series Stereo Line-Output Converter w/ Remote Turn-On Output.
1x JL Audio ACP208LG-W3v3 Amplified MicroSub+ with dual 8W3v3 (slot-ported) (ACP208LG-W3v3)
JL Audio ACP208LG-W3v3
Amplified Subwoofer System with Dual 8W3v3-0.40 Subwoofer Drivers, Built-In 500W Class D Amplifier, Black Carpet - Ported Enclosure
With MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance W3v3 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.
Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems.
General Specifications
| Continuous Power Handling (RMS) | Built-in amplifier 500 W @ 0.20 Ω |
| System Nominal Impedance | 0.20 Ω |
| Input Voltage Range @ RCA Inputs | 70 mV - 1.40 V RMS |
| Input Voltage Range @ High-Level Inputs | 280 mV - 5.4 V RMS |
| Recommended Copper Power / Ground Wire Gauge | 8 AWG wire |
| Fuse Rating | 30 A (ATO or ATC) |
| Enclosure Type | Slot-ported, Low-profile |
| Finish | Black carpet |
| Grille Included | Black Steel Mesh |
Signal Processing
| Filter Mode(s) | Low-Pass only |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz - 200 Hz |
| Output Polarity Switch | Yes |
| Remote Subwoofer Level Control | Optional (RBC-1) |
Physical Specifications
| External Width (W) | 36.625 in / 905 mm |
| External Height (H) | 11.125 in / 283 mm |
| External Depth (D1) | 5.125 in / 130 mm |
| Net Weight | 34.9 lb / 15.83 kg |
1x Kicker 46KISLOC2 K-Series Stereo Line-Output Converter w/ Remote Turn-On Output (46KISLOC2)
Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level, with all the sparkling highs and thunderous lows of your original audio.
Unlike traditional LOCs, the KISLOC2 is designed without inductors to deliver a completely flat frequency response at all volume levels.
Using nothing more than your factory speaker wires, the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp, 12-volt remote wire using DC offset. Powerful enough to turn on multiple amplifiers, the 12-volt remote wire delivers plenty of power without hunting for a switched 12-volt power source.
• Accepts up to 55 watts (16 volts) of input signal
• Fully compatible with standard radios and most smart radios*
• Delivers up to an 8-volt output signal
• Flat 20Hz-20kHz frequency range at all volume levels
• Includes a powerful 100 milli-amp, remote turn-on wire. No 12V power source needed!
• LED indicator for DC offset turn-on
*Amplifier output of smart radio must have 60Ω impedance or lower. See dealer for details.