Description
Included in this kit
This bundle includes a JL Audio SBX-F-RNGSCG4/10TW1 Stealthbox® Compatible with 2019-Up Ford Ranger, a JL Audio XDM300/1 XDM Series Monoblock Class-D Car/Marine Subwoofer Amplifier, 300 W, and a JL Audio HD-RLC:Amplifier Remote Level Control and Cable.
1x JL Audio SBX-F-RNGSCG4/10TW1 Stealthbox® Compatible with 2019-Up Ford Ranger (SBX-F-RNGSCG4/10TW1)
Under-Seat 10" Stealthbox® for 2019-Up Ford Ranger SuperCrew
Upgrade your Ford Ranger with deep, powerful bass while preserving valuable cabin space. This vehicle-specific Stealthbox® installs beneath the passenger-side rear seat, delivering impressive low-frequency performance from a sealed enclosure while remaining virtually hidden after installation.
Overview
Hidden Bass Performance
Designed specifically for the 2019-up Ford Ranger SuperCrew, this Stealthbox® enclosure installs beneath the passenger-side rear seat in place of the factory storage compartment. The custom enclosure houses a single 10TW1-2 10-inch subwoofer to deliver strong, low-frequency performance without sacrificing interior space.
Vehicle Integration
Factory-Like Fit
- Installs under the passenger-side rear seat.
- Replaces the factory under-seat storage compartment.
- Rear seat folding operation remains unaffected.
- Driver-side under-seat storage area remains available.
- Stealthbox® remains virtually hidden once installed.
| Subwoofer | One 10TW1-2 10-inch subwoofer |
| Enclosure Type | Sealed |
| Power Handling | 300 W |
| Wired Impedance | 2 Ω |
| Vehicle Fitment | 2019-up Ford Ranger SuperCrew |
| Compatibility | Will not fit SuperCab models |
| Installation Location | Passenger-side rear seat, replacing the factory storage compartment |
In the Box
- One 10TW1-2 subwoofer in a sealed enclosure
- One black steel mesh woofer grille
This Stealthbox® is designed exclusively for 2019-up Ford Ranger SuperCrew models. It installs beneath the passenger-side rear seat and will not fit SuperCab models.
1x JL Audio XDM300/1 XDM Series Monoblock Class-D Car/Marine Subwoofer Amplifier, 300 W (XDM300/1)
JL Audio XDM300/1 Monoblock Class D Car/Marine Subwoofer Amplifier, 300 W x 1 @ 2 Ω / 200 W x 1 @ 4 Ω - 14.4V
This little monoblock powerhouse employs JL Audio's high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output for its size. It is small enough to fit in most tight space applications, including small boats, pickups, motorcycles and UTV’s (in a weather-tight compartment).
Designed for car or boat installations, the XDM300/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Targeted specifically for subwoofer applications, the XDM300/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ω | 200 W RMS x 1 |
| @ 3 Ω | 250 W RMS x 1 |
| @ 2 Ω | 300 W RMS x 1 |
| @ 1.5 Ω | N/A |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ω | 160 W RMS x 1 |
| @ 3 Ω | 210 W RMS x 1 |
| @ 2 Ω | 270 W RMS x 1 |
| @ 1.5 Ω | N/A |
General Specifications
| Frequency Response | 10 Hz - 1 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >100 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω | >120 / 50 Hz |
| Damping Factor @ 2 Ω | >60 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 8 AWG wire |
| Fuse Rating | 30 A (AFS, AGU or MaxiFuse™) |
Signal Processing
| Filter Mode(s) | Low-Pass only |
| Filter Slope(s) | 12/24 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | Yes |
| Filter Defeat Function | Yes |
| Infrasonic Filter | none |
| Bass Boost EQ | No |
| Output Polarity Switch | No |
| Remote Subwoofer Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
| Remote Bass EQ Boost Control | No |
| Pass-Through Preamp Output | Buffered |
Physical Specifications
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 6.85 in / 174 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 3.8 lb / 1.72 kg |
1x JL Audio HD-RLC:Amplifier Remote Level Control and Cable (HD-RLC)
JL Audio HD-RLC: Amplifier Remote Level Control and Cable
Remote Level Control for Select JL Audio Amplifiers
The HD-RLC remotely controls the Bass Level of the following JL Audio amplifiers:
HD-Series: All models
XD-Series: All models
MHD-Series: All models
M-Series: All models
When the HD-RLC is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The HD-RLC kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.
A satin-finish aluminum knob can be purchased separately.