Description
Included in this kit
This bundle includes a JL Audio C1-650x 6.5-inch (165mm) Coaxial with 0.75-inch (19mm) aluminum dome tweeter, a Metra 82-8156 Speaker Adapter — Toyota 2018-Up - 6.5" & 6.75", and a Metra 72-8111 Speaker Harness — Toyota 2020-2025.
1x JL Audio C1-650x 6.5-inch (165mm) Coaxial with 0.75-inch (19mm) aluminum dome tweeter (C1-650x)
JL Audio C1-650x
Coaxial Speaker System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter
C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. To facilitate fit, multi-application adaptor rings are included with the C1-650x allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the speaker will fit into many "6-inch" speaker locations as well.
C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-650x is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil's motion. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.
Sold as a pair. Grilles not included.
General Specifications
| Continuous Power Handling (RMS) | 50 W |
| Peak Music Power | 225 W |
| Recommended Amplifier Power (RMS) | 10 - 75 W / Ch. |
| System Efficiency | 90.5 dB @ 1 W / 1 m |
| System Nominal Impedance | 4 Ω |
| System Frequency Response | 48 Hz - 24 KHz ± 3 dB |
Physical Specifications
| Frame Outer Diameter* (A) | 6.25 in / 159 mm |
| Grille Tray Outer Diameter (B) | N/A |
| Motor Outer Diameter (C) | 3.15 in / 80 mm |
| Frontal Coaxial Tweeter Protrusion** (D) | 0.72 in / 18 mm |
| Frontal Grille Protrusion (E) | N/A |
| Mounting Hole Diameter (F) | 5.02 in / 128 mm |
| Mounting Depth (G) | 2.07 in / 53 mm |
1x Metra 82-8156 Speaker Adapter — Toyota 2018-Up - 6.5" & 6.75" (82-8156)
Metra 82-8156 Speaker Adapter — Toyota 2018-Up - 6.5" & 6.75"
The Metra 82-8156 is a speaker mounting adapter. For the installation of most 6.5” and 6.75” aftermarket speakers in the original factory speaker location. Applications include 2023-2025 Subaru Solterra and 2019-2022 Toyota Avalon. Check the full vehicle list and equipment requirements for your installation.
Features
- Supplied as a pair for a two-speaker installation.
- For the installation of most 6.5” and 6.75” aftermarket speakers in the original factory speaker location.
- For use in multiple vehicle applications.
- Includes a one-year warranty for added purchase support.
- Fits 2023-2025 Subaru Solterra; match the factory equipment and connector before installation.
| Manufacturer model | 82-8156 |
|---|---|
| Product type | speaker mounting adapter |
| Product feature | For the installation of most 6.5” and 6.75” aftermarket speakers in the original factory speaker location |
| Product feature | For use in multiple vehicle applications |
| Product feature | Breakaway tab design |
| Included components | Sold as a pair |
| Warranty | 1-year warranty |
| Included components | (2) Speaker adapter plates |
Vehicle Applications
- 2023-2025 Subaru Solterra
- 2019-2022 Toyota Avalon
- 2023-2025 Toyota bZ4X
- 2018-2025 Toyota Camry
- 2023-2026 Toyota Crown
- 2025-2026 Toyota Crown Signia
- 2024-2025 Toyota Grand Highlander
- 2020-2025 Toyota Highlander
- 2024-2025 Toyota Land Cruiser
- 2021-2025 Toyota Mirai
- 2023-2025 Toyota Sequoia
- 2021-2025 Toyota Sienna
- 2024-2026 Toyota Tacoma
- 2022-2026 Toyota Tundra
Installation Notes
They mount directly into the factory location, so no drilling is required, and feature a breakaway tab design for easy installation.
Product Details and Requirements
- Upgrade your Toyota’s speakers with the help of these speaker adapter plates. These adapters are sold as a pair and designed to install 6.5” and most 6.75” aftermarket speakers in multiple vehicle applications, making them convenient to have on hand. They mount directly into the factory location, so no drilling is required, and feature a breakaway tab design for easy installation.
- Features:
- Includes:
- Visit our Vehicle Fit Guide for up-to-date vehicle-specific applications.
- For the installation of most 6.5” and 6.75” aftermarket speakers in the original factory speaker location
- For use in multiple vehicle applications
- Breakaway tab design
- Sold as a pair
- 1-year warranty
- (2) Speaker adapter plates
1x Metra 72-8111 Speaker Harness — Toyota 2020-2025 (72-8111)
Metra 72-8111 Speaker Harness — Toyota 2020-2025
The Metra 72-8111 is a speaker harness. (2) Two speaker harnesses. Applications include 2021-2024 Toyota Camry and 2020-2025 Toyota Highlander. Check the full vehicle list and equipment requirements for your installation.
Features
- Speaker harness for installing an aftermarket speaker.
- Carries the audio signal from the vehicle wiring to the connected speaker.
- Includes two speaker harnesses for a paired speaker installation.
- Connects without cutting, splicing or soldering the factory speaker wiring.
- Get installation assistance from Metra technical support seven days a week.
| Manufacturer model | 72-8111 |
|---|---|
| Product type | speaker harness |
| Product feature | Speaker harness for installing an aftermarket speaker |
| Product feature | Designed to fit multiple models |
| Installation / equipment | Plug-n-play design: No cutting, splicing, or soldering is needed |
| Product feature | Provides an audio signal to the connected speaker |
| Installation support | A tech support number is available for installation help 7 days a week |
| Warranty | 1-year warranty |
| Included components | (2) Two speaker harnesses |
| Installation / equipment | Keep in mind that you may need additional parts to complete your installation. For fitment information, look up your vehicle in our vehicle fit guide. |
Vehicle Applications
- 2021-2024 Toyota Camry
- 2020-2025 Toyota Highlander
- 2021-2023 Toyota RAV4 Prime
Installation Notes
This plug-n-play design eliminates the need to cut, splice, or solder any wires. Keep in mind that you may need additional parts to complete your installation. Plug-n-play design: No cutting, splicing, or soldering is needed. Keep in mind that you may need additional parts to complete your installation. For fitment information, look up your vehicle in our vehicle fit guide.
Product Details and Requirements
- Install aftermarket speakers into your Toyota faster with this vehicle-specific wiring harness that plugs right into the vehicle's factory speaker harness. This plug-n-play design eliminates the need to cut, splice, or solder any wires.
- Keep in mind that you may need additional parts to complete your installation. For fitment information,
- Features:
- Includes:
- Visit our Vehicle Fit Guide for up-to-date vehicle-specific applications.
- Speaker harness for installing an aftermarket speaker
- Designed to fit multiple models
- Plug-n-play design: No cutting, splicing, or soldering is needed
- Provides an audio signal to the connected speaker
- 1-year warranty
- (2) Two speaker harnesses