Description
Included in this kit
This bundle includes a Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp, and a Kicker 52CVR104 - CVR10 CompVR 10-Inch (25cm) Subwoofer, DVC, 4-ohm.
1x Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp - (46CXA4001)
Kicker 46CXA4001 CX400.1 400 Watt RMS 1-Ohm Stable Mono Amplifier
Using a Class-D power plant, the CXA400.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 400 watts into one bass channel. See below for more details.
Features:
• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look
Specifications:
• MODEL - CXA400.1
• Power (watts/ch) 4 Ohm - 150x1
• Power (watts/ch) 2 Ohm - 300x1
• Power (watts/ch) 1 Ohm - 400x1
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 8-1/8, 20.6
• Frequency Response (Hz): - 25-200, +0/-1dB
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - >95dB, a-weighted, re: rated power
• Active Crossover: - Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: - 25Hz @24dB/octave
• KickEQ™ Boost - Variable 0-6dB @40Hz
1x Kicker 52CVR104 - CVR10 CompVR 10-Inch (25cm) Subwoofer, DVC, 4-ohm - (52CVR104)
The reengineered CompVR 10-Inch Subwoofer is a 4Ω dual voice coil design, built to get the most out of your amp. The dual voice coil design adds a new level of wiring flexibility, to get the most out of CX Series amplifier, no matter how many subs you add to your ride. The CompVR Subwoofer works best with a sealed or ported enclosure for its substantial power handling.
Specifications
SIZE [in, cm]: 10, 25
IMPEDANCE [Ohms]: 4 DVC
Recommended Amplifier Power (watts RMS) 180-375
Peak Power (watts, per ANSI/CTA-2031-A) 750
SENSITIVITY [dB 1w/1m]: 83.6
MOUNTING DEPTH [in, cm]: 5-1/2, 14
MOUNTING DIAMETER [in, cm]: 9-3/16, 23.3
MIN SEALED BOX VOL [cu. ft, L]: 0.8, 22.7
MAX SEALED BOX VOL [cu. ft, L]: 3, 85
MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4
MAX VENTED BOX VOL [cu. ft, L]: 1.75, 49.6
