Description
Included in this kit
This bundle includes a Kicker 47KEY5001 500-Watt Mono Channel Amp With Start/Stop Capability, and a Kicker 50TCWC104 CompC 10" Subwoofer in Thin Profile Enclosure 4-Ohm.
1x Kicker 47KEY5001 500-Watt Mono Channel Amp With Start/Stop Capability (47KEY5001)
Kicker 47KEY5001 KEY 1-Channel DSP Smart Amplifier, 1x500W
The KEY500.1 is a smart subwoofer amplifier and audio processor in one, featuring an AI-driven DSP (digital signal processing). Using KICKER’s supplied test tones, the KEY automatically analyzes the audio being fed into the amplifier. Once this signal has been analyzed, the amp will automatically fix peaks in the signal coming in and restore the low bass that is typically missing. In a matter of moments, you get a clean, even bass response from your amp!
Craft your sound with ease! The KEY500.1 comes with 24dB sub-sonic and low-pass crossovers, bass boost and gain controls.
Measuring about eight inches long and less than two inches high, the KEY500.1 fits nearly anywhere. Mount it behind your glove box, under the seat, or in your trunk with ease.
The amplifier also features FIT 2+™ (Fail-safe Integration Technology 2 PLUS) – which provides nearly universal compatibility with stock or aftermarket radios. Another industry first, the KEY500.1 is uniquely suited to accept factory input signals as high as 40 volts (400 watts). The KEY amplifier will work with almost every car on the road today, whether you have a factory or aftermarket audio system.
Specifications -
• Power (watts/ch), 1 Ohm stereo: 500
• Power (watts/ch), 2 Ohm stereo: 300
• Power (watts/ch), 4 Ohm stereo: 150
• Microphone/Kicker EQ button: included
• Standard dimensions(H x W x L)(in, cm) 1-11/16, 4.3 x 2-3/4, 7 x 7-3/8, 18.7
• Frequency Response (Hz): 10-160
• Input Sensitivity: high level: 1V-40V / low level: 125mV-5V
• Signal-to-Noise Ratio: >90dB, a-weighted, re: rated power
• Selectable Electronic Crossover: Variable Low Pass 40-160 Hz, Variable High Pass 10-40 Hz
• What's in the Box: 1 - fuse holder, 1 - manual and installation hardware
1x Kicker 50TCWC104 CompC 10" Subwoofer in Thin Profile Enclosure 4-Ohm (50TCWC104)
Kicker 50TCWC104 10" CompC 4 Ohm Enclosure
The CompC Thin Profile 10-Inch Subwoofer Enclosure comes loaded a single 4-Ohm terminal.
Features:
- Fits Perfectly In A Trunk or SUV
- Genuine CompC Subwoofer
- Custom Port Design
- Made Of Heavy MDF
- Spring Loaded Speaker Terminal
- Thick Black Carpet Protects the Enclosure
- Embroidered KICKER Logo
This enclosure works best with 300 watts of recommended power. See below for more details.
Specifications
| Subwoofer (in, cm) |
| 10, 25 |
| Impedance (Ohms) |
| 4 |
| Power Watts (peak/RMS) |
| 600/300 |
| Sensitivity (dB 1w/1m) |
| 93.8 |
| Box Top Depth (in, cm) |
| 4,10.2 |
| Box Bottom Depth (in, cm) |
| 7-5/8, 19.4 |
| Box Height (in, cm) |
| 15, 38.1 |
| Box Width (in, cm) |
| 21-1/2, 54.6 |
| Recommended Amplifiers! |
| CX600.1-the ideal match |