Description
Included in this kit
This bundle includes 2x Kicker 52CVR124 - CVR12 CompVR 12-Inch (30cm) Subwoofer, DVC, 4-ohm, a Kicker 46CXA8001t CXA8001 - 800-Watt Mono Class D Subwoofer Amp, a Kicker 46CK4 K-Series Complete 4-AWG Amplifier Connection Kit W/ 2-Channel RCA Interconnects, and a Kicker 46AFS80 80 Amp AFS Fuse, Package Of 2.
2x Kicker 52CVR124 - CVR12 CompVR 12-Inch (30cm) Subwoofer, DVC, 4-ohm (52CVR124)
12" CompVR 4 Ohm
The reengineered CompVR 12-Inch Subwoofer is a 4Ω dual voice coil design, built for easy wiring.
This subwoofer uses a large-diameter, progressive-roll spider and a Santoprene surround for truly linear cone movement. All this technology creates outstanding bass in a subwoofer built to make the mirrors shake.
The CompVR Subwoofer works best with a sealed or ported enclosure for its substantial power handling.
Specifications
SIZE [in, cm]: 12, 30
IMPEDANCE [Ohms]: 4 DVC
Recommended Amplifier Power (watts RMS) 225-450
Peak Power (watts, per ANSI/CTA-2031-A) 900
SENSITIVITY [dB 1w/1m]: 86.9
MOUNTING DEPTH [in, cm]: 6-3/8, 16.2
MOUNTING DIAMETER [in, cm]: 11, 27.9
MIN SEALED BOX VOL [cu. ft, L]: 1, 28.3
MAX SEALED BOX VOL [cu. ft, L]: 4.6, 130
MIN VENTED BOX VOL [cu. ft, L]: 1.75, 49.6
MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7
1x Kicker 46CXA8001t CXA8001 - 800-Watt Mono Class D Subwoofer Amp (46CXA8001T)
Kicker 46CXA8001t CX800.1 800 Watt RMS 1-Ohm Stable Mono Amplifier
Using a Class-D power plant, the CXA800.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 800 watts into one bass channel. See below for more details.
Features:
• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look
Specifications:
• MODEL - CXA800.1
• Power (watts/ch) 4 Ohm - 300x1
• Power (watts/ch) 2 Ohm - 600x1
• Power (watts/ch) 1 Ohm - 800x1
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 8-1/8, 20.6
• Frequency Response (Hz): - 25-200, +0/-1dB
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - >95dB, a-weighted, re: rated power
• Active Crossover: - Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: - 25Hz @24dB/octave
• KickEQ™ Boost - Variable 0-6dB @40Hz
1x Kicker 46CK4 K-Series Complete 4-AWG Amplifier Connection Kit W/ 2-Channel RCA Interconnects (46CK4)
KICKER® complete amp kits feature top-quality Hyper-Flex power, ground and turn-on cables. K Series speaker wire and interconnects are also included, as is a heavy-duty AFS fuse holder and fusing. Insulated crimp connectors and zip ties come in the kit as well.
4AWG 2-Channel Amp Kit
This Complete Four Gauge Amp Kit comes complete with Full Spec wire, hardware, fusing and signal cable.
Hooking up your amplifier is easy with this complete amp kit. The best hardware, signal and power cable comes in one convenient package.
1x Kicker 46AFS80 80 Amp AFS Fuse, Package Of 2 (46AFS80)
KICKER AFS Fuses are platinum plated for maximum current transfer. These high-amp fuses are the best way to protect the investment you have in your sound system.
This pair of 80-amp fuses is a convenient way to protect your amplifiers, while delivering all the batter power your system needs.