Description
Included in this kit
This bundle includes a KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier, and a Kicker 48DCVR122 CompVR 12" dual subwoofers in vented box, 2-ohm.
1x KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier (53CXA9001)
KICKER • 53CXA9001
KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier
Power a subwoofer system with the KICKER CXA900.1 mono amplifier. The one-ohm-stable Class-D design delivers up to 900 watts, with active thermal rollback and a compact chassis. FIT+ inputs accept factory or aftermarket radio signals, while onboard filters and KickEQ bass boost let you adjust the bass output.
Mono Class D350 W x 1600 W x 1
Features and installation
- One-ohm-stable Class-D design delivers 900 W x 1 at 1 ohm, 600 W at 2 ohms, or 350 W at 4 ohms.
- FIT+ integration accepts up to 40 V of speaker-level input for connection to factory audio systems.
- Variable 50–200 Hz low-pass crossover and 15 Hz subsonic filter both use 24 dB/octave slopes.
- Gain-Match LED assists gain setup, while variable KickEQ adds up to 6 dB of bass boost at 40 Hz.
- Full-range outputs support system expansion; optional CXARC remote adjusts bass from the dash.
Technical specifications
| Model | 53CXA9001 / CXA900.1 |
| Amplifier type | Mono Class D |
| Power at 4 ohms | 350 W x 1 |
| Power at 2 ohms | 600 W x 1 |
| Power at 1 ohm | 900 W x 1 |
| Frequency response | 15–200 Hz, +0/-6 dB |
| Low-level input sensitivity | 125 mV–5 V |
| High-level input sensitivity | 1–40 V |
| Signal-to-noise ratio | Greater than 75 dB, A-weighted, referenced to rated power |
| Low-pass crossover | Variable 50–200 Hz, 24 dB/octave LR |
| Subsonic filter | 15 Hz, 24 dB/octave |
| KickEQ boost | Variable 0–6 dB at 40 Hz |
| Height | 2-7/32 inches |
| Length | 7-1/16 inches |
| Width | 6-27/32 inches |
| Remote bass control | CXARC compatible, sold separately |
CXARC remote bass controller is sold separately.
1x Kicker 48DCVR122 CompVR 12" dual subwoofers in vented box, 2-ohm (48DCVR122)
Kicker 48DCVR122 12" Dual CompVR Subwoofers in Vented Enclosure, 2-Ohm, 800w RMS
This subwoofer uses a large-diameter, progressive-roll spider and a Santoprene surround for truly linear cone movement. All this technology creates outstanding bass in a subwoofer built to make the mirrors shake. KICKER uses an advanced heat management system. Perimeter venting allows air to circulate while our UniPlate system redirects even more heat away from the motor. You get a cool, reliable speaker that lasts and lasts. A stamped steel basket holds vibration at bay while a pair of high-temp voice coils move an injection molded woofer hundreds of times a second, giving you strong, distortion-free bass.
This enclosure features tough MDF construction with head-duty internal bracing to make sure the only thing vibrating are your ears. The thick embroidered black carpet makes a statement of quality craftsmanship and sound, with front venting to further increase the output of these subwoofers. The pre-wired 2-Ohm terminals on the back make installation a breeze.
Key Features -
• SoloKon Cone System with Vented Back Bracing and Motor Cooling
• Red Stitched Surround for Unsurpassed Reliability
• Legendary KICKER Bass
• Front Venting for Smooth, Powerful Bass
• Extensive Internal Bracing and Thick MDF Construction
• Pre-Wired, Spring-Loaded, Two-Ohm Terminals
• Features the Best-in-Class CompVR Subwoofer
• Factory-Tuned Enclosure for Incredible Bass
• Great for SUVs, Hatchbacks and Car Trunks
VCWR12 Specifications -
• Woofer [in, cm] - (2) 12, 30
• Impedance [Ohms] - 2
• Recommended Amp Power [watts RMS] - 800
• Peak Power Handling [watts] - 1600
• Sensitivity [dB 1w/1m] - 98
• Enclosure Depth [in, cm] - 17-1/4, 43.8
• Enclosure Height [in, cm] - 16, 40.6
• Enclosure Width [in, cm] - 32-3/8, 82.2