Description
Included in this kit
This bundle includes a KICKER 53CXA15001 CXA1500.1 1500W RMS Mono Class D Subwoofer Amplifier, 2x Kicker 45L7R122 L7R 12-Inch (30cm) Subwoofer, Dual Voice Coil, 2-Ohm, a Kicker 46PKD1 PKD1 1/0AWG Dual Amplifier Power Kit - Power, Ground, Distribution Block, Remote Wire and Fuse Block., and a Kicker 46CXARC CXARC Remote Control for Kicker 46CX Series Amps.
1x KICKER 53CXA15001 CXA1500.1 1500W RMS Mono Class D Subwoofer Amplifier (53CXA15001)
KICKER CXA1500.1
KICKER 53CXA15001 CXA1500.1 1500W RMS Mono Class D Subwoofer Amplifier
The CXA1500.1 powers a dedicated bass channel with 1500 watts RMS at 1 ohm. Its FIT+ inputs accept factory or aftermarket radio signals, while gain matching and adjustable bass controls help integrate the amplifier with your subwoofer system.
1500W x 1 at 1 ohm; 1000W x 1 at 2 ohms; 550W x 1 at 4 ohms1650W at 14.4V, less than 10% THD+N15–200Hz, +0/−6dB
Features and system use
- Deliver 1500W RMS at 1 ohm, 1000W at 2 ohms, or 550W at 4 ohms for flexible subwoofer matching.
- FIT+ accepts speaker-level signals up to 40V to integrate with a wide range of factory radios.
- Shape bass with a variable 50–200Hz low-pass crossover and 0–6dB KickEQ boost at 40Hz.
- A 15Hz subsonic filter and active thermal rollback help protect the system during demanding playback.
- Use the gain-match LED for setup and add the optional CXARC remote for convenient bass adjustment.
Integration
Full-range outputs support system expansion. The CXARC bass remote is compatible and sold separately.
Technical specifications
| RMS power at 14.4V, less than 1% THD+N | 1500W x 1 at 1 ohm; 1000W x 1 at 2 ohms; 550W x 1 at 4 ohms |
| Dynamic power | 1650W at 14.4V, less than 10% THD+N |
| Frequency response | 15–200Hz, +0/−6dB |
| Low-pass crossover | 50–200Hz, 24dB/octave |
| Subsonic filter | 15Hz, 24dB/octave |
| Bass boost | 0–6dB at 40Hz |
| Dimensions (H x L x W) | 2-7/32 x 11-13/32 x 6-27/32 inches |
CXARC remote sold separately.
2x Kicker 45L7R122 L7R 12-Inch (30cm) Subwoofer, Dual Voice Coil, 2-Ohm (45L7R122)
The 12-inch L7R Square Sub moves more air and delivers bigger bass than circular subs, so you get more bump out of every watt!
It’s simple – more cone means more air moves. KICKER’s L7R Square Sub technology gives you up to 20% more cone area than a round sub.
Full 360-degree back bracing keeps the entire cone strong and stable for smooth, distortion-free bass.
The L7R's powerful motor delivers big bass, while utilizing next-level thermal management for optimal performance. The UniPlate™ solid pole piece & backplate construction ensure the sub stays cool, even under extreme power loads.
Dual voice coils come standard on all L7R models, for ultimate wiring flexibility. Get the highest possible power out of your amp.
Dual two-Ohm Voice Coil
Wrap Around Gasketing
Patented Ribbed Corners
Injection-Molded SoloKon™ Woofer
360-Degree Back Bracing
UniPlate™ Back Plate And Pole Piece
Bumped Back Plate
Thick Tinsel Leads
Large Ceramic Magnet
Steel Basket With Spoke Design
Nickel Plated Speaker Terminals
The L7R 12-Inch Subwoofer works best with 600 watts of recommended power in a sealed or ported enclosure. See below for more details.
Specifications
SIZE [in, cm]:
12, 30
IMPEDANCE [Ohms]:
2 DVC
POWER WATTS [peak/RMS]:
1200/600
SENSITIVITY [dB 1w/1m]:
86.7
MOUNTING DEPTH [in, cm]:
6-7/8, 17.4
MOUNTING DIAMETER [in, cm]:
11-1/16, 28.1
MIN SEALED BOX VOL [cu. ft, L]:
.88, 24.92
MAX SEALED BOX VOL [cu. ft, L]:
2, 56.64
MIN VENTED BOX VOL [cu. ft, L]:
1.75, 49.6
MAX VENTED BOX VOL [cu. ft, L]:
3.25, 92
What's in the Box:
1 - 12" Subwoofer, 1 - install manual, 2 - Kicker stickers
Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
1x Kicker 46PKD1 PKD1 1/0AWG Dual Amplifier Power Kit - Power, Ground, Distribution Block, Remote Wire and Fuse Block. (46PKD1)
Kicker 46PKD1 PKD1 1/0AWG Dual Amplifier Power Kit - Power, Ground, Distribution Block, Remote Wire and Fuse Block.
KICKER amp power kits feature top-quality Hyper-Flex™ power, ground and turn-on cables. A heavy-duty AFS fuse holder, fuse, terminals and zip ties come in the kit as well.
P-Series PKD1 1/0AWG Dual Amplifier Wiring Kit
This 1/0 Gauge Amp Kit comes complete with Full Spec wire, hardware, distribution block and fusing.
With proper wire and distribution, you get every bit of current you need, and you get it there safely. Powerful Full Spec wire delivers current efficiently and safely, while brass hardware distributes it to both of your amplifiers.
1x Kicker 46CXARC CXARC Remote Control for Kicker 46CX Series Amps (46CXARCt)
Kicker 46CXARC Remote / Bass Knob
CX-Series mono amps offer an optional remote level control to adjust your bass right from the dash. Dial it up the way you want to hear it.
CXARC Remote
Customize your bass, right from your front seat.
The CXARC is a remote bass controller, compatible with any CX, DX or PX KICKER amplifier equipped with a REMOTE BASS jack on its end.