Description
Included in this kit
This bundle includes a KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier, and a Kicker 45VL7R102 Single 10" L7R Loaded Vented Enclosure - 500 Watts RMS.
1x KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier (53CXA9001)
KICKER 53CXA9001 CXA900.1 900-Watt Mono Class-D Subwoofer Amplifier
Power a subwoofer system with the KICKER CXA900.1 mono amplifier. The one-ohm-stable Class-D design delivers up to 900 watts, with active thermal rollback and a compact chassis. FIT+ inputs accept factory or aftermarket radio signals, while onboard filters and KickEQ bass boost let you adjust the bass output.
Features and installation
- One-ohm-stable Class-D design delivers 900 W x 1 at 1 ohm, 600 W at 2 ohms, or 350 W at 4 ohms.
- FIT+ integration accepts up to 40 V of speaker-level input for connection to factory audio systems.
- Variable 50–200 Hz low-pass crossover and 15 Hz subsonic filter both use 24 dB/octave slopes.
- Gain-Match LED assists gain setup, while variable KickEQ adds up to 6 dB of bass boost at 40 Hz.
- Full-range outputs support system expansion; optional CXARC remote adjusts bass from the dash.
| Model | 53CXA9001 / CXA900.1 |
| Amplifier type | Mono Class D |
| Power at 4 ohms | 350 W x 1 |
| Power at 2 ohms | 600 W x 1 |
| Power at 1 ohm | 900 W x 1 |
| Frequency response | 15–200 Hz, +0/-6 dB |
| Low-level input sensitivity | 125 mV–5 V |
| High-level input sensitivity | 1–40 V |
| Signal-to-noise ratio | Greater than 75 dB, A-weighted, referenced to rated power |
| Low-pass crossover | Variable 50–200 Hz, 24 dB/octave LR |
| Subsonic filter | 15 Hz, 24 dB/octave |
| KickEQ boost | Variable 0–6 dB at 40 Hz |
| Height | 2-7/32 inches |
| Length | 7-1/16 inches |
| Width | 6-27/32 inches |
| Remote bass control | CXARC compatible, sold separately |
1x Kicker 45VL7R102 Single 10" L7R Loaded Vented Enclosure - 500 Watts RMS (45VL7R102)
Kicker 45VL7R102 Single 10" L7R Enclosure
The L7R 10-inch Subwoofer Enclosure is the perfect fit in your trunk and in your life.
The massive power handling of the dual L7R sub box only gets better with square subs! Packed with KICKER innovation, you get up to 20% more volume compared to a round driver, so you move more air and get more bass without the expense of a custom box.
Be Square
KICKER’s L7R square-sub technology gives you up to 20% more cone area than a round driver. Combined with KICKER’s patented ribbed corners, UniPlate™ solid pole piece and backplate, and injection-molded SoloKon™ cone system, you move more air and get more distortion-free bass – with the most innovative sub in the industry.
Ready To Rumble
Each L7R sub box is engineered to exact specifications, so you get world-class sound quality in a ready-made enclosure. You’re just minutes away from the best bass you’ve heard!
IM-PORT-ANT
The L7R ports are engineered to deliver smooth, powerful bass without the “huffing” sound you experience in inferior port designs.
Beauty and Brawn
All L7R enclosures are engineered with extensive internal bracing, thick MDF construction and rounded corners. The KICKER logo is custom embroidered on thick black carpet for protection that lasts. Serious bass never looked – or sounded – this good!
Features:
KICKER’s square sub technology features patented ribbed corners, UniPlate™ solid pole piece and backplate, and injection-molded SoloKon™ cone system. You get up to 20% more volume compared to a round driver, so you move more air and get more bass! Combined with an optimized front-facing port, reinforced MDF construction, rounded corners and thick black carpet, you get big bass without the expense of a custom enclosure.
- Genuine L7R Subwoofer Included
- Front-Facing Port Design for loudest possible bass
- Angled Back for Excellent Fit
- Heavy Internal Bracing makes is last for years
- Single 2-Ohm Terminal for quick installation
- Easy to Install and Wire
- Thick Black Carpeting to handle bumps and scrapes
- Aesthetically pleasing Rounded Corners
- Embroidered KICKER Logo
- Thick MDF Construction
Specifications
| Type |
| single |
| Woofer [in, cm] |
| Solo-Baric L7R 10" 2Ω |
| Impedance [Ohms] |
| 2 |
| Power Watts [RMS] |
| 500 |
| SENSITIVITY [dB 1w/1m] |
| 88.8 |
| Box Top Depth (in, cm): |
| 8-1/4, 21 |
| Box Bottom Depth (in, cm): |
| 13-7/8, 35.1 |
| Box Height (in, cm): |
| 13, 33 |
| Box Width (in, cm): |
| 24, 61 |
| What's in the box? |
| one loaded enclosure with one 10-inch subwoofer mounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long) one owner's manual two stickers |