Description
IPX6: Protection against Powerful Water Jets / Water projected in powerful jets, up to 12.5mm (0.49 inch) against the amplifier from any direction shall have no harmful effects.
IPX7: Protection against Immersion, up to 1 m (3 feet, 3 inch) depth / Restricts harmful amounts of water entry when the amplifier is immersed in water under defined conditions of pressure and time, up to 1 m (3 feet, 3 inches) of submersion.
IP6X: Effective against Dust-tight / Dust entry is restricted to avoid damage to the amplifier.
A Drain Tunnel Structure is employed for creating a gap between the amplifier and the installation surface. This prevents saltwater and sand from accumulating on the bottom, increasing corrosion protection.
Thicker terminal connection points and increased wire size enables maximum current flow and higher output for better low frequency response and cleaner output.
High Quality PMLCAP’s (Polymer Multi-Layer Capacitors) are utilized to lower distortion levels, improving the overall listening experience at higher volumes, while maintaining the integrity of the sound.
Magnetic Shielding for the output coils reduce radiated noise, delivering smooth and accurate sound.
Specifications
Audio unit
Max Power Output: 600W
Rated Power Output: Stereo (4Ω) 50W x 4 (20Hz–20kHz, ≤1.0% THD), Stereo (2Ω) 75W x 4 (1kHz, ≤1.0% THD), Bridged (4Ω) 150W x 2 (1kHz, ≤1.0% THD)
Speaker Impedance: 4Ω (2Ω to 8Ω allowable), (Bridged connection: 4Ω to 8Ω allowable)
Frequency response (+0, –3dB): 10Hz–35kHz
Input Sensitivity (RCA): 0.2V-5.0V
Signal to noise ratio: 89dB
Low pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
High pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
General
Operating voltage: 12V DC car battery
Current consumption: 26A
Operational temperature range: –10°C – 60°C
Dimensions (W × H × D): 7-13/16" x 1-15/16" x 4-1/8"
Weight: 1.6kg (3.5lbs)
Waterproof & Dustproof: IP66, IP67
IPX7: Protection against Immersion, up to 1 m (3 feet, 3 inch) depth / Restricts harmful amounts of water entry when the amplifier is immersed in water under defined conditions of pressure and time, up to 1 m (3 feet, 3 inches) of submersion.
IP6X: Effective against Dust-tight / Dust entry is restricted to avoid damage to the amplifier.
A Drain Tunnel Structure is employed for creating a gap between the amplifier and the installation surface. This prevents saltwater and sand from accumulating on the bottom, increasing corrosion protection.
Thicker terminal connection points and increased wire size enables maximum current flow and higher output for better low frequency response and cleaner output.
High Quality PMLCAP’s (Polymer Multi-Layer Capacitors) are utilized to lower distortion levels, improving the overall listening experience at higher volumes, while maintaining the integrity of the sound.
Magnetic Shielding for the output coils reduce radiated noise, delivering smooth and accurate sound.
Specifications
Audio unit
Max Power Output: 600W
Rated Power Output: Stereo (4Ω) 50W x 4 (20Hz–20kHz, ≤1.0% THD), Stereo (2Ω) 75W x 4 (1kHz, ≤1.0% THD), Bridged (4Ω) 150W x 2 (1kHz, ≤1.0% THD)
Speaker Impedance: 4Ω (2Ω to 8Ω allowable), (Bridged connection: 4Ω to 8Ω allowable)
Frequency response (+0, –3dB): 10Hz–35kHz
Input Sensitivity (RCA): 0.2V-5.0V
Signal to noise ratio: 89dB
Low pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
High pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
General
Operating voltage: 12V DC car battery
Current consumption: 26A
Operational temperature range: –10°C – 60°C
Dimensions (W × H × D): 7-13/16" x 1-15/16" x 4-1/8"
Weight: 1.6kg (3.5lbs)
Waterproof & Dustproof: IP66, IP67
