Description
Included in this kit
This bundle includes 2x Memphis Audio MM105TW 10" Tower Speakers with (A.T.A.C) Advanced Tower Array Construction and Swivel Mount - White, Pair, 2x Memphis Audio MX800.4 Powersports 800 Watts 4-Channel Amplifier, and a Memphis Audio MXRGBBTC - Phone Controlled Bluetooth RGB LED Controller.
2x Memphis Audio MM105TW 10" Tower Speakers with (A.T.A.C) Advanced Tower Array Construction and Swivel Mount - White, Pair (MM105TW)
MM105TW – 10" Tower Speakers with ATAC™ Technology
Advanced Tower Array Construction • White • Pair
Memphis Audio MM105TW tower speakers feature ATAC™ (Advanced Tower Array Construction), a curved tweeter array design engineered to deliver wide dispersion, high output, and exceptional clarity. Designed as a fully sealed, compression-horn-free solution, these 10-inch tower speakers are built for demanding marine and saltwater environments where durability and sound performance matter.
Overview
ATAC™ Technology for Powerful, Wide-Angle Sound
Unlike traditional compression horn tower speakers, the MM105TW uses a curved tweeter line array mounted across the front of the speaker. This ATAC™ design is similar to concert line-array dispersion systems and is built to project accurate, high-output sound with broad dispersion—so your music stays clear and powerful at a wide range of listening angles behind your boat.
- Advanced Tower Array Construction (ATAC™) with curved array tweeter bridge design.
- Four-tweeter line array for wide dispersion and strong clarity.
- Designed to avoid traditional compression-horn gasket/woofer intersection design.
ATAC™ maximizes woofer surface area for increased output and midbass, while enabling a fully sealed tower design to help keep water and debris out.
Durability
Sealed Construction for Marine Conditions
The MM105TW is designed with a fully sealed woofer approach intended to prevent water and debris intrusion. With sealed electrical connections and an IP66 rating, it’s built for durability in marine and saltwater applications.
- ASA plastic enclosure.
- Sealed electrical connections.
- IP66 rated.
- Stainless steel array grille.
Key Features
Mounting Flexibility, Lighting & Clean Install Details
Installation
Mount Options
Designed for flexible tower installs, the MM105TW includes swivel clamp hardware allowing you to match your tower layout and aiming needs.
- Clamp fit: 1.75" to 3" bars
- 360° swivel brackets
- Grille included
Color is listed as White. Sold as a pair.
| Model | MM105TW |
| Color | White |
| Size | 10" |
| Power Handling | 300 W RMS / 600 W Peak |
| Impedance | 4 Ω |
| Dimensions (H x W x D) | 14.3" x 10.83" x 13.9" |
| Clamp Fit | 1.75" to 3" |
| Grille Included | Yes |
2x Memphis Audio MX800.4 Powersports 800 Watts 4-Channel Amplifier (MX800.4)
MX800.4 – MX Series Powersports 4-Channel Amplifier
200W x 4 @ 2Ω • IP66 Rated • Compact Powersports Design
Memphis MX powersports amplifiers were engineered with off-road and marine environments in mind. The MX800.4 delivers massive output from a compact, IP66-rated chassis, making it an ideal solution for side-by-side, UTV, ATV, and marine audio systems where space is limited and durability is critical. Conformal coated circuit boards and sealed connectors ensure reliable performance in harsh weather, mud, dust, and water conditions.
Overview
Big Power for Harsh Environments
The MX800.4 is designed to thrive where traditional amplifiers fail. With an IP66-rated enclosure, sealed connectors, and a conformal coated PCB, this amplifier is built to withstand the elements while delivering clean, high-output power to four channels. Its compact size allows for flexible mounting in tight spaces commonly found in powersports vehicles.
- Designed specifically for powersports and marine use.
- Compact chassis fits easily in confined mounting locations.
- Built to deliver reliable performance in all weather conditions.
IP66 rating and sealed construction keep your system playing no matter the conditions.
Design & Installation
Installer-Friendly Compact Design
A top-mounted, water-resistant control panel allows easy tuning access even after installation. The compact footprint and sealed connectors make routing wiring and mounting simple in side-by-side and marine applications.
- Top-mounted controls with protective cover.
- Sealed connectors for power and signal.
- 2/4 input switch for system flexibility.
Features
Purpose-Built for Powersports
| Amplifier Type | 4-Channel Powersports Amplifier |
| RMS Power @ 4Ω | 125 W x 4 |
| RMS Power @ 2Ω | 200 W x 4 |
| Bridged Power @ 4Ω | 400 W x 2 |
| THD @ 4Ω | < 1% |
| Frequency Response | 10 Hz – 20 kHz |
| Input Range | 300 mV – 9.7 V |
| Dimensions (L × W × H) | 8.35 × 4.35 × 1.75 in |
| Recommended Amp Kit | 8GKIT |
1x Memphis Audio MXRGBBTC - Phone Controlled Bluetooth RGB LED Controller (MXRGBBTC)
MXRGBBTC RGB LED Light Controller
Take control of your lighting system with the Memphis Aura RGB LED Light Controller. Using the Memphis AURA iOS/Android app interface, the MXRGBBTC gives you access to color selection, lighting effects, and brightness adjustment for a customized display across multiple Memphis LED speakers.
Overview
App-Controlled RGB Lighting Management
The Memphis MXRGBBTC is designed to manage Aura RGB LED lighting through the Memphis AURA app interface on iOS and Android devices. It provides centralized lighting control for compatible Memphis LED speakers and allows users to build a coordinated lighting display across multiple zones.
With support for up to 8 Memphis LED speakers per controller, the MXRGBBTC is suited for larger lighting setups in vehicles and recreational applications where synchronized color and effect control is important.
Control Features
Expanded Lighting Customization
- Select from up to 30 light colors through the app interface.
- Adjust flash and fade lighting effects directly from the app.
- Control brightness and additional lighting functions for a tailored display.
- Optional app interface available via QR code on the product box.
System Expansion
Multi-Controller Sync Capability
The Memphis AURA app is capable of pairing up to 5 individual MXRGBBTC devices, making it possible to synchronize multiple lighting displays to a single app interface. This allows broader control in multi-zone installations where a single controller is not enough.
- Pairs up to 5 MXRGBBTC controllers in the Memphis AURA app.
- Supports synchronized control of multiple lighting displays from one app.
- Designed for scalable installations across larger systems.
Application
Built for Multiple Environments
The MXRGBBTC is built for use in a wide range of installations, including car, boat, motorcycle, and powersports applications. Its IPX7 water-resistant construction helps it handle environments where moisture resistance is important.
IPX7 water-resistant construction supports use in marine, motorcycle, powersports, and automotive lighting applications.
| Model | MXRGBBTC |
| Product Type | RGB LED light controller |
| App Compatibility | iOS / Android via Memphis AURA app |
| Speaker Control Capacity | Up to 8 Memphis LED speakers |
| Controller Pairing Capacity | Up to 5 individual MXRGBBTC devices |
| Lighting Control Functions | Up to 30 light colors, flash, fade, brightness, and more |
| Water Resistance | IPX7 |
| Application Use | Car, boat, motorcycle, and powersports |