Description
Included in this kit
This bundle includes 2x Memphis VIV1212 VIV 12" 1 OR 2 OHM Subwoofer with FLEX Selectable Impedance Technology, a Memphis Audio MJP2000.1 Monoblock Subwoofer Amplifier - 2000 Watts RMS x 1 at 1-Ohm, and a Memphis Audio 0GKIT 0-Gauge Amp Install Kit With ANL Fuse Holder With One 250A Fuse, And A Pair Of ETP-17 17-Foot RCAs.
2x Memphis VIV1212 VIV 12" 1 OR 2 OHM Subwoofer with FLEX Selectable Impedance Technology (VIV1212)
Memphis Audio VIV1212 — 12″ Subwoofer (Selectable 1Ω / 2Ω, 1000W RMS)
Inspired by the groundbreaking VIV1422, the VIV1212 delivers the same high-output performance and sound-quality focus in a more traditional 12″ form factor. Designed to fit common enclosures while maintaining near-flawless sound reproduction, the VIV1212 strikes a balance between musical accuracy and serious output.
Overview
High Output Meets Sound Quality
The VIV1212 was engineered to deliver the best of both worlds—powerful output and exceptional sound quality. Capable of handling 1000 watts RMS, this subwoofer maintains clarity and control even at high volume levels, making it suitable for systems that demand both impact and precision.
Its 12″ size allows it to fit into more traditional enclosures while still benefiting from the advanced engineering and technologies developed for the VIV series.
Cone & Suspension
V-Groove Surround for Greater Air Movement
A folded V-groove surround allows the VIV1212 to achieve increased excursion without sacrificing effective cone surface area. This design moves more air while maintaining control, resulting in stronger low-frequency output with minimal distortion.
- Folded V-groove surround for increased excursion.
- Maintains effective surface area for efficient air movement.
- Designed for clean output at high excursion levels.
Motor & Cooling
Thermal Stability Under Power
The VIV1212 uses a 3″ aluminum voice coil paired with DVVC (Direct Vent Voice Coil Cooling) to help manage heat during extended high-power operation. This cooling approach supports consistent performance and reduced thermal stress.
- 3″ aluminum voice coil for power handling and control.
- DVVC Direct Vent Voice Coil Cooling.
- Designed to maintain performance during long listening sessions.
System Flexibility
FLEX Technology with Jumper Plug
Memphis Audio’s FLEX technology gives installers and enthusiasts the ability to select either 1Ω or 2Ω impedance using the included Flex jumper plug. Simply reposition the jumper into the desired slot to match amplifier requirements—no tools or rewiring needed.
Easily adapt system impedance for different amplifier configurations without changing subwoofers.
| Model | VIV1212 |
| Size | 12″ |
| Selectable Impedance | 1Ω or 2Ω (FLEX technology) |
| Power Handling (RMS / Peak) | 1000W / 2000W |
| Sensitivity | 85.5 dB @ 1Ω / 84.8 dB @ 2Ω |
| Magnet Size | 162 oz |
| Voice Coil | 3″ aluminum voice coil |
| Mounting Depth | 7.5″ |
| Cutout Diameter | 11″ |
The VIV1212 is ideal for systems that demand both strong output and refined sound quality, offering modern flexibility with selectable impedance and advanced cooling in a traditional 12″ format.
1x Memphis Audio MJP2000.1 Monoblock Subwoofer Amplifier - 2000 Watts RMS x 1 at 1-Ohm (MJP2000.1)
Memphis Audio MOJO Pro Mono Amplifier
The Memphis Audio MOJO Pro amplifier is engineered for high-output pro audio and performance-focused car audio systems, delivering extreme power, clean response, and flexible system configuration in a rugged, compact chassis.
Overview
High-Power MOJO Pro Performance
Built to carry the MOJO name, this mono amplifier delivers massive output with precise control. Its compact footprint and high efficiency make it suitable for both pro audio builds and high-performance daily-driven systems.
With stable operation down to 1 ohm and strapable capability, the MOJO Pro provides system designers and installers the flexibility to scale power as system demands increase.
Key Features
Designed for Output, Control & Reliability
- Extruded aluminum heatsink with exposed metal accents for thermal stability.
- 12dB/octave Butterworth crossovers for controlled low-frequency performance.
- Variable crossover and EQ controls for precise system tuning.
- Variable EQ bass boost on mono block models.
- Strapable mono block design for expanded power capability.
- Remote bass knob included for on-the-fly output adjustment.
Power Output
Stable High-Power Mono Operation
- 830 watts RMS x 1 @ 4Ω.
- 1500 watts RMS x 1 @ 2Ω.
- 2000 watts RMS x 1 @ 1Ω.
- Designed for high-current, high-output applications.
Signal Performance
Clean, Controlled Low-End Response
- Frequency response from 11Hz to 200Hz.
- Total Harmonic Distortion under 1% at 4Ω.
- Wide 400mV–7.5V input sensitivity range.
- Engineered for consistent output under demanding loads.
| Amplifier Type | Mono block |
| RMS Power @ 4Ω | 830W x 1 |
| RMS Power @ 2Ω | 1500W x 1 |
| RMS Power @ 1Ω | 2000W x 1 |
| THD @ 4Ω | <1% |
| Frequency Response | 11Hz – 200Hz |
| Input Sensitivity | 400mV – 7.5V |
| Crossover Type | 12dB/octave Butterworth |
| Dimensions (L × W × H) | 7.5" × 13.2" × 2" |
| Recommended Amp Kit | 0GKIT |
The MOJO Pro mono amplifier is designed for extreme output systems requiring clean, controlled bass and scalable power. Proper electrical support and professional installation are recommended for best performance.
1x Memphis Audio 0GKIT 0-Gauge Amp Install Kit With ANL Fuse Holder With One 250A Fuse, And A Pair Of ETP-17 17-Foot RCAs (0GKIT)
0GKIT – 0 Gauge Amplifier Installation Kit
True AWG OFC Wiring • Complete High-Performance Amp Install Solution
Memphis 0GKITS are engineered for serious power delivery using true standard AWG wire made from 100% pure oxygen-free copper. Amplifier performance is directly affected by the quality of wiring and connections, and this kit delivers the clean, reliable power that professional installers across the nation trust. The 0GKIT includes everything required for a high-current amplifier installation—including interconnects— making it one of the highest-quality 0 gauge amp kits on the market.
Overview
True 0 Gauge Power for Maximum Amplifier Performance
Designed to support high-current amplifiers, the Memphis 0GKIT uses true AWG oxygen-free copper wiring to ensure maximum conductivity and minimal voltage drop. This kit eliminates the compromises found in low-quality wiring solutions and provides everything needed for a clean, professional-grade amplifier installation.
- True standard AWG wire made from 100% OFC.
- Supports high-power amplifier systems.
- Includes interconnects and distribution hardware.
Built with the materials and components professionals rely on for clean, powerful performance.
Construction
Premium Materials & Hardware
The 0GKIT includes satin chrome plated brass components, nickel-plated terminals, and durable frosted jacket wiring for long-lasting performance and corrosion resistance.
- Satin chrome plated brass fuse blocks and terminals.
- Nickel-plated ring terminals and ground lug.
- Durable frosted wire jackets for easy routing.
Kit Features
Complete High-Current Installation Solution
What’s Included
In the Box
- 25’ 1/0 AWG frosted orange power wire
- 2’ 1/0 AWG frosted black ground wire
- 8’ 4 AWG frosted orange power wire
- 4’ 4 AWG frosted black ground wire
- 20’ 18 AWG blue remote turn-on wire
- 17’ 2-channel parallel interconnect
- 17’ 4-channel parallel interconnect
- ANL fuse block (satin chrome plated brass)
- 250A ANL fuse (nickel plated)
- Battery terminal (satin chrome plated brass)
- (2) Power distribution blocks (satin chrome plated brass)
- Nickel plated ground lug
- (3) 1/0 AWG nickel plated ring terminals
- (1) 1/0 AWG snap bushing
- (8) 8" black cable ties
- (4) ST3.9 × 16mm black set screws
- Complete hardware pack
| Model | 0GKIT |
| Power Wire Gauge | 0 AWG |
| Wire Material | 100% Oxygen-Free Copper (OFC) |
| Fuse Type | ANL |
| Interconnects | (3) ETP-17 parallel interconnects |