Description
Included in this kit
This bundle includes a Memphis VIV1212 VIV 12" 1 OR 2 OHM Subwoofer with FLEX Selectable Impedance Technology, a Memphis Audio MJP1000.1 Monoblock Subwoofer Amplifier - 1000 Watts RMS x 1 at 1-Ohm, a Memphis Audio 0GKIT 0-Gauge Amp Install Kit With ANL Fuse Holder With One 250A Fuse, And A Pair Of ETP-17 17-Foot RCAs, and a Memphis Audio VIVG12 VIVG 12" VIV Subwoofer Grille.
1x Memphis VIV1212 VIV 12" 1 OR 2 OHM Subwoofer with FLEX Selectable Impedance Technology (VIV1212)
Memphis Audio VIV1212 — 12″ Subwoofer (Selectable 1Ω / 2Ω, 1000W RMS)
Inspired by the groundbreaking VIV1422, the VIV1212 delivers the same high-output performance and sound-quality focus in a more traditional 12″ form factor. Designed to fit common enclosures while maintaining near-flawless sound reproduction, the VIV1212 strikes a balance between musical accuracy and serious output.
Overview
High Output Meets Sound Quality
The VIV1212 was engineered to deliver the best of both worlds—powerful output and exceptional sound quality. Capable of handling 1000 watts RMS, this subwoofer maintains clarity and control even at high volume levels, making it suitable for systems that demand both impact and precision.
Its 12″ size allows it to fit into more traditional enclosures while still benefiting from the advanced engineering and technologies developed for the VIV series.
Cone & Suspension
V-Groove Surround for Greater Air Movement
A folded V-groove surround allows the VIV1212 to achieve increased excursion without sacrificing effective cone surface area. This design moves more air while maintaining control, resulting in stronger low-frequency output with minimal distortion.
- Folded V-groove surround for increased excursion.
- Maintains effective surface area for efficient air movement.
- Designed for clean output at high excursion levels.
Motor & Cooling
Thermal Stability Under Power
The VIV1212 uses a 3″ aluminum voice coil paired with DVVC (Direct Vent Voice Coil Cooling) to help manage heat during extended high-power operation. This cooling approach supports consistent performance and reduced thermal stress.
- 3″ aluminum voice coil for power handling and control.
- DVVC Direct Vent Voice Coil Cooling.
- Designed to maintain performance during long listening sessions.
System Flexibility
FLEX Technology with Jumper Plug
Memphis Audio’s FLEX technology gives installers and enthusiasts the ability to select either 1Ω or 2Ω impedance using the included Flex jumper plug. Simply reposition the jumper into the desired slot to match amplifier requirements—no tools or rewiring needed.
Easily adapt system impedance for different amplifier configurations without changing subwoofers.
| Model | VIV1212 |
| Size | 12″ |
| Selectable Impedance | 1Ω or 2Ω (FLEX technology) |
| Power Handling (RMS / Peak) | 1000W / 2000W |
| Sensitivity | 85.5 dB @ 1Ω / 84.8 dB @ 2Ω |
| Magnet Size | 162 oz |
| Voice Coil | 3″ aluminum voice coil |
| Mounting Depth | 7.5″ |
| Cutout Diameter | 11″ |
The VIV1212 is ideal for systems that demand both strong output and refined sound quality, offering modern flexibility with selectable impedance and advanced cooling in a traditional 12″ format.
1x Memphis Audio MJP1000.1 Monoblock Subwoofer Amplifier - 1000 Watts RMS x 1 at 1-Ohm (MJP1000.1)
MJP1000.1 – MOJO Pro Monoblock Amplifier
1000W RMS @ 1Ω • Strap-able Pro Audio Power
MOJO Pro amplifiers are built for serious output and extreme system demands. The MJP1000.1 monoblock amplifier features a rugged extruded aluminum chassis with exposed aluminum accents and Memphis’ signature orange highlight, delivering both unmistakable MOJO styling and uncompromising performance. Designed to be strap-able, this amplifier allows multiple units to be combined for massive power output in high-performance pro audio and subwoofer systems.
Overview
Compact Size. Massive MOJO Output.
The MJP1000.1 delivers serious low-frequency power in a compact chassis designed for high-output pro audio systems. Producing up to 1000 watts RMS at 1 ohm, this monoblock amplifier is ideal for driving high-power subwoofers while maintaining clean, controlled bass response. Strap-able capability allows system builders to scale power output even further for extreme applications.
- Designed for high-output pro audio and subwoofer systems.
- Strap-able mono design for scalable power.
- Compact footprint for flexible installation.
Built to push subwoofers hard with reliable, high-current power delivery.
Design & Build
Rugged Pro Audio Construction
An extruded aluminum heat sink with exposed aluminum accents provides excellent thermal management while reinforcing the aggressive MOJO Pro aesthetic. The compact housing allows the MJP1000.1 to fit easily into a wide range of vehicle builds without sacrificing performance.
- Extruded aluminum heat sink.
- Signature MOJO orange accent strip.
- Built for high-current, high-output operation.
Features
Tuning & Control
| Amplifier Type | Monoblock |
| RMS Power @ 4Ω | 425 W x 1 |
| RMS Power @ 2Ω | 725 W x 1 |
| RMS Power @ 1Ω | 1000 W x 1 |
| THD @ 4Ω | < 1% |
| Frequency Response | 11 Hz – 200 Hz |
| Input Range | 200 mV – 6 V (Low) / 3 V – 20 V (High) |
| Dimensions (L × W × H) | 7.5 × 9.5 × 2 in |
| Recommended Amp Kit | 0GKIT |
1x Memphis Audio 0GKIT 0-Gauge Amp Install Kit With ANL Fuse Holder With One 250A Fuse, And A Pair Of ETP-17 17-Foot RCAs (0GKIT)
0GKIT – 0 Gauge Amplifier Installation Kit
True AWG OFC Wiring • Complete High-Performance Amp Install Solution
Memphis 0GKITS are engineered for serious power delivery using true standard AWG wire made from 100% pure oxygen-free copper. Amplifier performance is directly affected by the quality of wiring and connections, and this kit delivers the clean, reliable power that professional installers across the nation trust. The 0GKIT includes everything required for a high-current amplifier installation—including interconnects— making it one of the highest-quality 0 gauge amp kits on the market.
Overview
True 0 Gauge Power for Maximum Amplifier Performance
Designed to support high-current amplifiers, the Memphis 0GKIT uses true AWG oxygen-free copper wiring to ensure maximum conductivity and minimal voltage drop. This kit eliminates the compromises found in low-quality wiring solutions and provides everything needed for a clean, professional-grade amplifier installation.
- True standard AWG wire made from 100% OFC.
- Supports high-power amplifier systems.
- Includes interconnects and distribution hardware.
Built with the materials and components professionals rely on for clean, powerful performance.
Construction
Premium Materials & Hardware
The 0GKIT includes satin chrome plated brass components, nickel-plated terminals, and durable frosted jacket wiring for long-lasting performance and corrosion resistance.
- Satin chrome plated brass fuse blocks and terminals.
- Nickel-plated ring terminals and ground lug.
- Durable frosted wire jackets for easy routing.
Kit Features
Complete High-Current Installation Solution
What’s Included
In the Box
- 25’ 1/0 AWG frosted orange power wire
- 2’ 1/0 AWG frosted black ground wire
- 8’ 4 AWG frosted orange power wire
- 4’ 4 AWG frosted black ground wire
- 20’ 18 AWG blue remote turn-on wire
- 17’ 2-channel parallel interconnect
- 17’ 4-channel parallel interconnect
- ANL fuse block (satin chrome plated brass)
- 250A ANL fuse (nickel plated)
- Battery terminal (satin chrome plated brass)
- (2) Power distribution blocks (satin chrome plated brass)
- Nickel plated ground lug
- (3) 1/0 AWG nickel plated ring terminals
- (1) 1/0 AWG snap bushing
- (8) 8" black cable ties
- (4) ST3.9 × 16mm black set screws
- Complete hardware pack
| Model | 0GKIT |
| Power Wire Gauge | 0 AWG |
| Wire Material | 100% Oxygen-Free Copper (OFC) |
| Fuse Type | ANL |
| Interconnects | (3) ETP-17 parallel interconnects |
1x Memphis Audio VIVG12 VIVG 12" VIV Subwoofer Grille (VIVG12)
12" VIV Subwoofer Grille for 12" VIV subwoofers