Description
Included in this kit
This bundle includes 2x Memphis PRX10FT Power Reference 10" 1/2/4 Ohm Selectable Impedance Subwoofer, a Memphis Audio SRX600.1V Mono 1-ohm 600 Watt Amplifier, and a Memphis Audio 4GKIT 4-Gauge Amp Install Kit With ANL Fuse Holder With One 200A Fuse, And A Pair Of ETP-17 17-Foot RCAs.
2x Memphis PRX10FT Power Reference 10" 1/2/4 Ohm Selectable Impedance Subwoofer (PRX10FT)
Memphis Audio PRX10FT — 10″ Power Reference Subwoofer (Selectable 1Ω / 2Ω / 4Ω)
The Memphis Audio PRX10FT Power Reference 10″ subwoofer delivers serious bass output with unmatched system flexibility. Featuring FLEX Triple Voice Coil technology, this subwoofer allows you to select 1-ohm, 2-ohm, or 4-ohm impedance using a simple jumper plug—making it easy to configure your system today and adapt it in the future.
Overview
Triple-Impedance Flexibility with Powerful Output
Designed for enthusiasts who demand both performance and adaptability, the PRX10FT pushes up to 400 watts RMS while maintaining clean, controlled bass. Its innovative FLEX Triple Voice Coil design allows the subwoofer to be configured for 1-ohm, 2-ohm, or 4-ohm operation without rewiring or replacing components.
Whether you’re optimizing efficiency for a single-sub system or planning future expansion, the PRX10FT gives you unmatched control over your system’s electrical load.
FLEX Technology
Tri-Flex Selectable Voice Coil Design
Memphis Audio’s FLEX Triple Voice Coil technology sets the PRX10FT apart from traditional subwoofers. Using a jumper plug, you can quickly select the desired impedance to match your amplifier or system design goals.
Select 1Ω, 2Ω, or 4Ω impedance with a simple jumper adjustment—no rewiring required.
Cone & Suspension
Built for Control and Durability
A black-on-black polypropylene cone is paired with a stitched butyl rubber surround and reinforced spider to provide consistent cone control under high excursion. This construction helps maintain clarity while delivering impactful low-end performance.
- Polypropylene cone for rigidity and durability.
- Stitched butyl rubber surround for long-term reliability.
- Reinforced spider and improved suspension design.
- Woven tinsel leads for dependable signal transfer.
Thermal Management
DVVC Direct Voice Coil Cooling
DVVC (Direct Voice Coil Cooling) technology actively helps manage heat during extended high-power operation. By reducing thermal buildup, the PRX10FT maintains consistent output and reliability even when pushed hard.
- DVVC cooling for improved thermal efficiency.
- Designed for extended high-output performance.
- Supports clean bass at rated power levels.
Applications
Ideal for Flexible System Builds
With triple selectable impedance and a compact 10″ footprint, the PRX10FT is well suited for custom enclosures, trunk builds, and systems designed with future expansion in mind. Its versatility makes it a strong choice for both first-time installs and evolving audio setups.
| Model | PRX10FT |
| Size | 10″ |
| Selectable Impedance | 1Ω / 2Ω / 4Ω (Tri-Flex selectable) |
| Power Handling (RMS / Peak) | 400W / 800W |
| Sensitivity | 82.8 dB @ 1Ω / 85.2 dB @ 2Ω / 84.9 dB @ 4Ω |
| Magnet Size | 63 oz |
| Voice Coil Diameter | 2″ |
| Mounting Depth | 5.1″ |
| Cutout Diameter | 9.2″ |
The PRX10FT is ideal for users who want powerful bass today with the freedom to reconfigure system impedance in the future, delivering classic Power Reference performance with next-level flexibility.
1x Memphis Audio SRX600.1V Mono 1-ohm 600 Watt Amplifier (SRX600.1V)
Memphis Audio SRX600.1V – Street Reference Monoblock Amplifier
Street Reference amplifiers deliver an aggressive blend of performance, style, and value. Designed for entry to mid-level audio systems, the SRX600.1V provides reliable subwoofer power in a compact chassis with Street Reference styling and essential tuning controls.
Overview
Street Reference Bass Power
The SRX600.1V is built to push solid low-frequency power without stretching your budget. With flexible impedance stability and onboard tuning features, this monoblock amplifier makes it easy to dial in clean, controlled bass performance for a wide range of subwoofer and enclosure combinations.
- Designed for entry to mid-level subwoofer systems
- Compact footprint with strong power output
- Simple controls for effective system tuning
Features
Tuning & Street Reference Styling
- Textured aluminum heatsink
- Selectable bass boost
- Variable crossover network
- Variable subsonic filter
- Ultra-bright LED accent light strip
- Remote level control included
| Model | SRX600.1V |
| RMS Power @ 4Ω | 300W x 1 |
| RMS Power @ 2Ω | 500W x 1 |
| RMS Power @ 1Ω | 600W x 1 |
| Total Harmonic Distortion | <1% @ 4Ω |
| Frequency Response | 17Hz – 250Hz |
| Dimensions (L x W x H) | 8.92" x 7.87" x 2.16" |
| Recommended Amp Kit | 4GKIT |
Use the recommended 4GKIT wiring kit to ensure proper power delivery and dependable amplifier performance.
1x Memphis Audio 4GKIT 4-Gauge Amp Install Kit With ANL Fuse Holder With One 200A Fuse, And A Pair Of ETP-17 17-Foot RCAs (4GKIT)
Memphis Audio 4GKIT – 4 Gauge Amplifier Installation Kit
Memphis Audio amplifier installation kits are built using true standard AWG wire made from 100% pure oxygen-free copper to ensure maximum power transfer and reliable performance. The 4GKIT includes everything required to properly install your amplifier, including high-quality RCA interconnects, making it one of the highest performance 4-gauge amp kits available.
Overview
Proper Power for Maximum Amplifier Performance
Your amplifier’s performance is directly affected by the quality of the wiring and connections used. The Memphis Audio 4GKIT is engineered using true oxygen-free copper wiring and high-quality termination components to ensure consistent voltage delivery and clean signal transfer. Trusted by installers nationwide, this kit provides the foundation for dependable amplifier performance.
- True standard AWG wire for accurate current capacity
- Oxygen-free copper for improved conductivity
- Complete kit for a clean, professional installation
Included Components
Everything You Need in One Kit
- 17' 4-AWG frosted orange power wire
- 3' 4-AWG frosted black ground wire
- 17' 18-AWG blue remote turn-on wire
- (2) 17' 2-channel parallel RCA interconnects
- ANL fuse block with satin chrome plated brass
- Nickel plated 200A ANL fuse
- (4) 4-AWG nickel plated ring terminals
- (2) 4-AWG snap bushings
- (2) 22–18 AWG butt splices
- (6) 6" black cable ties
Application
Installer-Grade Reliability
Designed for performance-focused installations, the 4GKIT is ideal for powering a wide range of amplifiers where consistent current delivery and dependable connections are critical. This kit eliminates guesswork by providing matched, high-quality components trusted by professional installers.
| Model | 4GKIT |
| Power Wire Gauge | 4 AWG |
| Fuse Holder Type | ANL |
| Interconnects | (2) ETP-17 |