null
New!

Rockford P1 3.5 Dash & 6x9 Door Speakers 300x4 Amp & Install Kit

Shop All: Rockford Fosgate

No reviews yet Write a Review
SKU:
RFBDL260814-36
Condition:
New
Shipping: Free 2-Day Shipping!
$908.97
Rockford P1 3.5 Dash & 6x9 Door Speakers 300x4 Amp & Install Kit
$908.97

Description

Included in this kit

This bundle includes a Rockford Fosgate P1V2-3 Punch P1 3.5” 3-Way Coaxial Speaker, a Rockford Fosgate P1V2-69 Punch P1 6"x8” 3-Way Coaxial Speaker, a Rockford Fosgate R2-300X4 4 Channel Amplifier- 50x4 @ 4-Ohm, 75x4 @ 2-Ohm, 150x2 @ 4-Ohm Bridged, and a Rockford Fosgate RFK4X Complete Amp Kit: 17ft 4awg Power Wire, 3ft 4awg Ground Wire, 30ft 16awg Spkr Wire, (1) 16ft Twisted Pair Rca, 20ft Remote Wire, Maxi Fuse Holder, 100 Amp Fuse.

1x Rockford Fosgate P1V2-3 Punch P1 3.5” 3-Way Coaxial Speaker (P1V2-3)


Engineered to Fit. Built to Perform.
The P1 PUNCH speakers are simple, all-in-one upgrades for standard factory systems. The P1 are perfect for Basic OEM systems with single-speaker locations in doors or rear decks. Factory single cone drivers don’t have tweeters and replacing them with a 3-way coaxial will deliver a big leap in sound clarity and “punch”.

Kit Includes:
• (2) 3.5" Speakers
• (4) OEM Adaptors
• Installation Hardware

Specifications:
Speaker Type: Coaxial
Midrange Size (Nominal Diameter): 3.5"
Tweeter Size (Nominal Diameter): 3/4” (19 mm) Inverted Dome
Piezo Size (Nominal Diameter): 3/8” (9 mm) Co-Witnessed Convex
Nominal Impedance (Ohms): 4Ω
Frequency Response (Hz): 98Hz - 25kHz
Voice Coil Diameter (in/mm): 1" (25.4 mm)
CrossoverTweeter High-Pass: 9kHz @ 6 dB/Octave
Midrange Bass Blocker: 1,200Hz @ 6 dB/Octave (33µF)
Power Handling (Watts RMS): 75 Watts RMS/ 150 Watts Peak
Fs (Hz): 130 Hz
Sensitivity (dB @ 1W/1M): 82 dB
Sensitivity (2.83V/1M): 85 dB
Cutout Diameter: 2.87" (73 mm)
Rear-Loading Depth (Twist-Lock Adaptor): 1.48" (37.7 mm)
Front-Loading Depth (Twist-Lock Adaptor): 1.7" (43.3 mm)
Front Side Clearance: 0.53" (13.4 mm)
Removable Motor Cover: No
Grille/Trim Ring Included: No

Included in the Box
(2) 3.5” 4Ω 3-Way Coaxial Speakers
(1) 3.5” Speaker Cutout Template
(2) 3.5” 2-Tab Twist-Lock Adaptors
(2) 3.5” 3-Tab Twist-Lock Adaptors
(2) 3.5” 3-Tab Wide Twist-Lock Adaptors
(2) 3.5” 2-Tab Wide Twist-Lock Adaptors
(2) 33µF Non-Polarized Cap (Bass-Blockers)
(6) Self-Tapping Phillips #8x32mm (Speaker)
(2) 18 AWG Red/Black Speaker Wire, 205 mm
(3) 18 AWG (–) Female Crimp Spade Conn. (.187”)
(3) 18 AWG (+) Female Crimp Spade Conn. (.250”)
(6) 18 AWG Crimp Butt Connectors

Mounting Hardware: Yes

1x Rockford Fosgate P1V2-69 Punch P1 6"x8” 3-Way Coaxial Speaker (P1V2-69)


Engineered to Fit. Built to Perform.
The P1 PUNCH speakers are simple, all-in-one upgrades for standard factory systems. The P1 are perfect for Basic OEM systems with single-speaker locations in doors or rear decks. Factory single cone drivers don’t have tweeters and replacing them with a 3-way coaxial will deliver a big leap in sound clarity and “punch”.

Kit Includes:
• (2) 6"x9" Speakers
• Installation Hardware

Specifications:
Speaker Type: Coaxial
Midrange Size (Nominal Diameter): 6"x9"
Tweeter Size (Nominal Diameter): 3/4” (19 mm) Inverted Dome
Piezo Size (Nominal Diameter): 3/8” (9 mm) Co-Witnessed Convex
Nominal Impedance (Ohms): 4Ω
Frequency Response (Hz): 45Hz - 25kHz
Voice Coil Diameter (in/mm): 1" (25.4 mm)
CrossoverTweeter High-Pass: 9kHz @ 6 dB/Octave
Power Handling (Watts RMS): 75 Watts RMS 150 Watts Peak
Fs: 60 Hz
Sensitivity (dB @ 1W/1M): 89 dB
Sensitivity (2.83V/1M): 92 dB
Cutout Diameter: 8.4" x 5.71" (213.5 mm x 145 mm)
Mounting Depth (Standard Flange): 3.13" (79.4 mm)
Min. Mounting Depth (No Motor Cover): 3.13" (70 mm)
Front Side Clearance: 0.42" (10.6 mm)
Removable Motor Cover: Yes
Grille/Trim Ring Included: No

Included in the Box:
(2) 6”x9” 4Ω 3-Way Coaxial Speakers
(1) 6”x9” Speaker Cutout Template
(8) Self-Tapping Phillips #8x32mm (Speaker)
(2) 18 AWG Red/Black Speaker Wire, 205 mm
(3) 18 AWG (–) Female Crimp Spade Conn. (.187”)
(3) 18 AWG (+) Female Crimp Spade Conn. (.250”)
(4) 18 AWG Crimp Butt Connectors
Mounting Hardware: Yes

1x Rockford Fosgate R2-300X4 4 Channel Amplifier- 50x4 @ 4-Ohm, 75x4 @ 2-Ohm, 150x2 @ 4-Ohm Bridged (R2-300X4)


Rockford Fosgate Prime 300 Watt 4-Channel Amplifier

Primed for Performance, the R2-300X4 is a 300 watt, full-range Class-D amplifier capable of operating at 4Ω or 2Ω stereo and 4Ω bridged/mono. This amplifier is extremely efficient because of its Class-D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. supply that generates more power as voltage increases.

The R2 models are developed for car audio fanatics that want a reliable amplifier – with all the power and performance you’ve come to expect from Rockford Fosgate – at an economical price. Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. These 3rd generation of Prime Series amplifiers are refined with the latest Rockford Fosgate technology for easy setup and configuration, making them perfect for use with factory audio or custom aftermarket systems.

  • Balanced Differential Inputs with RCA Pass Through Outputs
  • High Level Input Capable
  • Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
  • Features C.L.E.A.N. Set-up
  • 2/4 Channel Input Selection Switch
  • Front and Rear Variable Input Gain adjustment level
  • Top Mounted Control Panel
  • Short Circuit & Over Current Protection
  • CEA-2006 Compliant & CE Compliant
  • Cast aluminum heat sink
  • Full Range Class-D
  • Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
  • 1 Year Warranty

General Specifications

CEA-2006 Compliant
CEA-2006 Guidelines CEA-2006 Power Rating
50W x 4 @ 4Ω
≤1.0% THD+N
Cta-2006 Compliant
Number of Channels
4
Total Power
(Sum of Rated Power)
300 Watts
Rated Power
(RMS Continuous Power)
50 Watts x 4 @ 4Ω
75 Watts x 4 @ 2Ω
150 Watts x 2 @ 4Ω Bridged/Mono
Dynamic Power
(PVC/PowerCube®)
70 Watts x 4 @ 4Ω
115 Watts x 4 @ 2Ω
230 Watts x 2 @ 4Ω Bridged/Mono
Bridgeable
Yes
Frequency Response
20 Hz - 20 kHz
Input Sensitivity
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V
Circuit Topology Class
Class-D
Efficiency (average)
Total Harmonic Distortion (THD+Noise)
4Ω: <1.0%
2Ω: <1.0%
Signal Input
Front Low-Level: 4 RCA
Front High-Level: 4-Pin Molex
Rear Low-Level: 4 RCA
Rear High-Level: 4-Pin Molex

Input Switch: 2/4 Input
(works for RCA/hi-level inputs)
Signal Output
Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input)
Tone Controls
No
Crossover Controls
Front High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth

Front Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth

Rear High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth

Rear Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth

All-Pass: Yes
Remote Controls
No
Visual Indicators
Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out (front)
C.L.E.A.N. Out (rear)
Power Wire Gauge
4 AWG
Power Input Connector
Compression Terminal Block
Speaker Wire Gauge
8 AWG
Speaker Output Connector
Compression Terminal Block
Cooling
Convection
Heatsink
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
60 A
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)
39 A
Suggested Alternator
Dimensional Diagram
Dimensions (H x W x D)
1.9" x 6.8" x 10.1"
(4.9 cm x 17.3 cm x 25.5 cm)
Shipping Weight


1x Rockford Fosgate RFK4X Complete Amp Kit: 17ft 4awg Power Wire, 3ft 4awg Ground Wire, 30ft 16awg Spkr Wire, (1) 16ft Twisted Pair Rca, 20ft Remote Wire, Maxi Fuse Holder, 100 Amp Fuse (RFK4X)


Rockford Fosgate 4 AWG Complete Installation Kit

4 gauge complete power, ground and signal installation kit for a 2-channel amplifier.

Kit includes 17 feet of 4 AWG power wire, 3 feet of 4 AWG ground wire, 30 feet of 16 AWG speaker wire, (1) 16 feet twisted pair RCA, Maxi fuse holder and fuse, 20 feet of remote wire, 100 Amp fuse.

  • FULL spec cable - meets or exceeds AWG (American Wire Gauge) requirements
  • 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
  • Includes appropriate wire termination hardware
  • 4 AWG (21.1mm²) 1,862 strands
  • 16 AWG (1.31mm²) 65 strands
  • 1 Year Warranty

Specifications

Battery PWR/GND Gauge
4 AWG
Amplifier PWR/GND Gauge
4 AWG
Fuse Type
MAXI
Dual Amp Installation Kit
No
Speaker Wire Gauge
16 AWG
Fuse Size
100 Amp


Extra Information

Brand:
Rockford Fosgate
Weight:
21.32 LBS
RMS Wattage Per Speaker:
150
UPC:
199730566129
Bundle:
Yes
Feature 1:
This bundle includes a Rockford Fosgate P1V2-3 3.5” Speaker, P1V2-69 6"x8” Speaker, R2-300X4 4 Channel Amplifier, and RFK4X Complete Amp Kit.
Feature 2:
Experience superior sound clarity with the Rockford Fosgate P1V2-3 3-Way Coaxial Speaker, designed for enhanced audio performance.
Feature 3:
Upgrade your car audio with the P1V2-69 6"x8” Speaker, delivering powerful bass and crisp highs for an immersive listening experience.
Feature 4:
The R2-300X4 4 Channel Amplifier offers flexible power options with 50x4 @ 4-Ohm, 75x4 @ 2-Ohm, and 150x2 @ 4-Ohm Bridged.
Feature 5:
Complete your installation with the RFK4X Amp Kit, featuring high-quality cables and components for optimal connectivity.
Condition:
NEW
Weight:
21.3200 lbs
Shipping:
Free 2-Day Shipping!
Check Fitment for Your Vehicle
Use our Fit Guide to verify compatibility in seconds.
Open Fit Guide