Description
Included in this kit
This bundle includes a Rockford Fosgate M2WL-10H 10" Color Optix 2-Way Tower Speakers, Pair - White, a Rockford Fosgate M5-800X4 4 Channel Element Ready Amplifier - 125x4 @ 4-Ohm, 200x4 @ 2-Ohm, 400x2 @ 4-Ohm Bridged, a Rockford Fosgate PMX-RGB Color Optix Light Controller With Optional App Interface, a Rockford Fosgate RGB-Y6P 6-Pin Color Optix™ Y-Adaptor for PMX-RGB (Gen-2), and 2x Rockford Fosgate RGB-16 16 Ft Color Optix Extension Cable To Be Used With Pmx-Rgb & RGB-Y4P or RGB-Y6P.
1x Rockford Fosgate M2WL-10H 10" Color Optix 2-Way Tower Speakers, Pair - White (M2WL-10H)
Rockford Fosgate M2WL-10H
Color Optix™ 2-Way Horn Loaded Tower Speakers - White
CLASS LEADING OUTPUT
The M2WL-10H and M2WL-10HB models are marine grade 10" full-range horn-loaded drivers engineered specifically to be BIG and LOUD! Rockford Fosgate's not kidding, their very own product development brief states: "Rockford Fosgate developed the 10-inch horn loaded drivers to be the loudest marine driver on the market."
The frequency response is uniquely tuned for "open-air" environments, so you hear the detail in your music the way it was intended to be heard. This makes the 10-inch horn loaded drivers perfect for use in salt or fresh watercraft as well as some UTV installations.
Due to the long-range projection capability of the horn-loaded design, these drivers can be used where the listener will be at a distance from the speaker. Includes both Sport and Stainless Steel grille inserts.
The M2WL-10H and M2WL-10HB models are marine grade 10" full-range horn-loaded drivers engineered specifically to be BIG and LOUD! Rockford Fosgate's not kidding, their very own product development brief states: "Rockford Fosgate developed the 10-inch horn loaded drivers to be the loudest marine driver on the market."
The frequency response is uniquely tuned for "open-air" environments, so you hear the detail in your music the way it was intended to be heard. This makes the 10-inch horn loaded drivers perfect for use in salt or fresh watercraft as well as some UTV installations.
Due to the long-range projection capability of the horn-loaded design, these drivers can be used where the listener will be at a distance from the speaker. Includes both Sport and Stainless Steel grille inserts.
FEATURES AT A GLANCE
- Integrated 1” (25 mm) high efficiency horn tweeter
- Adjust color experience to suit your taste with Rockford Fosgate® Color Optix™ controller (optional)
- Universal clamp with 360-degree rotation fits bar sizes from 1.5” to 3” diameter
- Bright, wide-angle LEDs provide rich, reliable illumination
- RGB rear lighted medallion with 360-degree rotation ensures properly oriented logo
- Integrated Deutsch™/Amphenol™ inputs in 2 locations for thru-clamp and direct-mount configurations
- Gold plated marine grade brass terminals provide a corrosion resistant connection
- Deutsch DT connectors incorporate front/rear silicone seals to protect against environmental ingress
- 100% UV Stable ASA plastic frame & grille design stands up to harsh marine environment
- Stainless steel grilles pre-installed and includes sport grille option
- Injection molded mineral filled polypropylene cone body with UV inhibitors
- Provides superb low and midrange frequency reproduction with smooth high frequency roll-off
- VAST vertical attach surround technique increases effective radiating cone area up to 25%
- Klippel Verified certification program delivers the best possible loudspeakers
- IPX6 Water Intrusion Rated
- 2-Year Warranty
SPECIFICATIONS
Specifications:- Speaker Type: 2-Way Loaded Enclosure
- Speaker Quantity: 2
- Speaker Size: 10"
- Speaker Series: M2 (M2-10H)
- Enclosure Design: Sealed
- Enclosure Material: High density ASA
- Speaker Connector: 6-pin Deutsch™/Amphenol™
- Frequency Response (Hz): 20 Hz - 25 kHz
- Nominal Impedance (Ohms): 4Ω
- Power Handling (RMS): 300 Watts (RMS)
- 1200 Watts (PEAK)
- LED Voltage Range: 9 - 16 VDC
- LED Current Draw: 0.25 A
- LED Recommended Fuse: 1 A
- 15.23" x 11.50" x 14.68" (386.9 mm x 292.1 mm x 372.8 mm)
- Shipping Weight24 Lbs. (10.8 Kg.)
- (2) Loaded wake cans
- (2) Universal clamps (1130-74671-B1)
- (2) Grommets
- (2) Spare safety inserts for screw clamp
- (2) 6-pin Deutsch harnesses (1130-73416-C1)
- (1) Safety Torx wrench
- (2) 1.5"- 2.5" rubber inserts & stainless screws
- (2) 2.5"- 3.0" rubber inserts & stainless screws
- (2) White sport grills
- (1) Allen bit for rotating speakers in can
1x Rockford Fosgate M5-800X4 4 Channel Element Ready Amplifier - 125x4 @ 4-Ohm, 200x4 @ 2-Ohm, 400x2 @ 4-Ohm Bridged (M5-800X4)
Rockford Fosgate 800 Watt 4-Channel Element Ready™ Amplifier
The M5-800X4 amplifier features the next level of Element Ready™ design from Rockford Fosgate that’s built as rugged as the outdoor environment it’s used in. The IPX6 rating is provided by splash guards on both ends and heavy-duty molded harnesses with integral sealing gaskets. A new PRESET switch - for use with Rockford Fosgate UTV audio kits - eliminates the need to set-up and tune the amp for the best experience possible. Built on the popular TM series, M5 amplifiers feature the same great technologies like Constant Power, Class-AD and C.L.E.A.N., all engineered, developed, and validated in Tempe, Arizona.
Rockford Fosgate amplifiers are known world-wide for producing more power than their ratings suggest. The M5 amplifiers are the first series based on new industry standard Dynamic Power ratings, bringing their conservative ratings to the forefront. Engineered from the ground up and purpose-built to deliver more output where you actually hear it, this is real dynamic power that performs not only on paper, but performance heard through the musical experience. You’ll see two amplifier power ratings, the traditional Continuous Power output, and the new Dynamic Power output, both tested in accordance with the CTA-2006 specification. Consider Continuous Power as wattage developed on the test bench for comparison against other amplifiers in the same class, and Dynamic Power as real-world wattage when connected to a speaker load, listening to music. Either way you look at it, Rockford Fosgate is proving – once again – these amplifiers are powerful enough to drive any speaker or subwoofer you throw at them.
- Element Ready™ design with integrated harness & panel seals
- PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
- Play all day, easy to integrate, and keep music playing for extended lengths of time
- C.L.E.A.N. input/output clip detection and indicator LEDs
- Constant Power provides instantaneous delivery of output over varying impedance loads
- Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
- Top mounted control panel with Element Ready™ smoked lens cover
- OEM and aftermarket radio integration inputs
- Low Impedance Stability
- Proprietary testing using RATS (Rockford Automated Testing System)
- Proprietary Class-AD technology allows amplifier to produce more power with less current draw
- Discrete Surface Mount technology utilizes 1% tight-tolerances for high efficiency and reduced cross-talk
- MESHA 4 reduces MOSFET temps, lowers distortion, increases durability and prolongs device life span
- Chassis Isolation from mounting points greatly reduces possible introduction of vehicle noise
- Balanced Differential Inputs eliminates noise picked up by signal cables
- Remote-Out feature when using high level inputs
- 2-Year Warranty
General Specifications
CEA-2006 Compliant
Yes
Cta-2006 Compliant
Number of Channels
4
Total Power
(Sum of Rated Power)
(Sum of Rated Power)
800 Watts
Rated Power
(RMS Continuous Power)
(RMS Continuous Power)
CTA-2006 Continuous Power Rating100 Watts x 4 @ 4Ω
100 Watts x 4 @ 2Ω
200 Watts x 2 @ 4Ω Bridged/Mono
≤1.0% THD+N
Dynamic Power
(PVC/PowerCube®)
(PVC/PowerCube®)
CTA-2006 Dynamic Power Rating125 Watts x 4 @ 4Ω
200 Watts x 4 @ 2Ω
400 Watts x 2 @ 4Ω Bridged/Mono
Bridgeable
Yes
Frequency Response
10 Hz - 50 kHz
Input Sensitivity
150mVrms - 12Vrms
Circuit Topology Class
Class-AD
Efficiency (average)
>75%
Total Harmonic Distortion (THD+Noise)
<0.25% THD+N @ 1 Watt
Signal Input
Low-Level: 4 RCA
High-Level: (2) 4-Pin Molex
High-Level: (2) 4-Pin Molex
Signal Output
—
Tone Controls
Front/Rear: 0-14dB @ 12.5kHz
Front/Rear: 0-18dB @ 45Hz
Front/Rear: 0-18dB @ 45Hz
Crossover Controls
High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
All-Pass: Yes
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
All-Pass: Yes
Remote Controls
No
Visual Indicators
Power: Blue
Protect: Red
Input Clip: Red
Output Clip: Blue/Red
Protect: Red
Input Clip: Red
Output Clip: Blue/Red
Power Wire Gauge
8 AWG
Power Input Connector
Compression Terminal Block
Speaker Wire Gauge
16 AWG
Speaker Output Connector
4-Pin Molex
Cooling
Convection
Heatsink
Extruded Aluminum
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
(not included)
—
Average Current Draw (13.8V Music)
—
Max. Current Draw (13.8V Sinewave)
55 A @ 4Ω
85 A @ 2Ω
90 A @ 4Ω Bridged
85 A @ 2Ω
90 A @ 4Ω Bridged
Suggested Alternator
Dimensional Diagram
Dimensions (H x W x D)
1.7" x 4.25" x 8.41"
(42.8 mm x 108 mm x 213 mm)
Does not include harnesses
(42.8 mm x 108 mm x 213 mm)
Does not include harnesses
Shipping Weight
TBA
1x Rockford Fosgate PMX-RGB Color Optix Light Controller With Optional App Interface (PMX-RGB)
Rockford Fosgate PMX-RGB Color Optix™ Lighting Controller
The Rockford Fosgate PMX-RGB Color Optix™ controller provides centralized LED lighting control for Color Optix™ M1 and M2 speakers and subwoofers. Designed for marine environments, the controller allows you to create a unified lighting ecosystem that works seamlessly across your audio system.
When paired with the RF Connect™ smartphone app, users can customize lighting colors and effects directly from their mobile device. The controller supports lighting control for up to 16 Color Optix™ speakers or subwoofers, allowing for large multi-speaker installations while maintaining synchronized lighting effects.
Lighting Control & App Integration
- Controls LED lighting for Color Optix™ M1 and M2 speakers and subwoofers
- Supports up to 16 speakers or subwoofers from a single controller
- RF Connect™ smartphone app compatibility for lighting customization
- Multiple PMX-RGB controllers supported within the RF Connect™ ecosystem
Installation & System Integration
The PMX-RGB controller operates on a wide 9VDC–24VDC input range, allowing it to integrate into a variety of marine electrical systems. The unit includes extended power and signal leads to simplify installation in multi-speaker setups.
- Red and black power/ground leads extend 16 inches from the controller
- Eight female signal outputs with 16.5 inch leads
- Internal 2 Amp fuse for circuit protection
- Stainless steel mounting hardware included
Additional links and Y-adaptors are available separately for expanded lighting connections.
Specifications
| Max Speaker Capacity | Up to 16 Speakers / Subwoofers (slight dimming may occur at end of string) |
| Operating Voltage | 9VDC – 24VDC |
| Power / Ground Cable | Red & Black leads extend 16" |
| Signal Outputs | 8 female outputs with 16.5" leads |
| Internal Fuse | 2 Amp |
| RF Connect™ Capacity | Unlimited number of PMX-RGB controllers supported |
| Warranty | 2-Year |
1x Rockford Fosgate RGB-Y6P 6-Pin Color Optix™ Y-Adaptor for PMX-RGB (Gen-2) (RGB-Y6P)
Plug-and-play Y-adaptor simplifies the installation of additional Color Optix™ speakers. Simply connect this Y-adaptor to the RGB controller or RGB-6/16/25 extension cable, plug-in the speaker's Deutsch™ connector, then use the additional 6-pin female connector to daisy-chain an additional speaker. Check compatibility chart of Rockford Fosgate marine audio speakers before purchasing.
Color Optix™ cables provide a water-tight seal for electrical connections between our RGB controller and matching Color Optix™ speaker. The cable carries DC low voltage, designed to illuminate the appropriate LEDs behind the speaker grille. The IPX6 rating ensures your connections are water-tight when properly secured.
Features -
• Element Ready™ Deutsch™ / Amphenol™ connector IP7 rated
• Y-adapter allows for daisy-chaining multiple speakers on a single run
• 2 conductor leads for speaker (+) and (-)
• True Marine ecoSystem that works together with Color Optix™ controller
• Ensures connections remain waterproof and safe from elements.
• Compatible with M1/M2 speakers and subwoofers
• 2-Year Warranty
• No cutting, no splicing
2x Rockford Fosgate RGB-16 16 Ft Color Optix Extension Cable To Be Used With Pmx-Rgb & RGB-Y4P or RGB-Y6P (RGB-16)
Plug and play extension cable that makes the installation of the PMX-RGB controller and RGB LED speakers simple. Extends distance between RGB controller to speaker by 16 feet.
Features -
• Element Ready™ Deutsch™ / Amphenol™ connector IP7 rated
• Controller illuminates up to 8 Color Optix™ speakers and/or subwoofers
• 2-Year Warranty