null

Wet Sounds - Two Pairs Of RECON 6-S RGB Silver LED 6.5" Speakers And A Kicker KXMA400.4 Marine Amplifier

Wet Sounds

No reviews yet Write a Review
SKU:
WSBDL190228-31
Condition:
New
$849.99
$849.99

Description

Included in this kit


This bundle includes two pairs of Wet Sounds RECON6-S-RGB LED XS Series Silver Cone 6.5" Coax open grille, and a Kicker KXMA4004 KXMA400.4 4x100-Watt Four-Channel Full-Range Class D Amplifier

RECON is the most full-featured, best sounding, and best valued speaker in Wet Sound’s history. The RECON 6 was especially designed for low power applications & can be used successfully even with power built in to most head units.

Features:

  • • 6.5" Component Style Coaxial Speaker
  • • .75" Aluminum Dome Tweeter
  • • Injection Molded Composite Cone
  • • Santoprene Spider & Surround
  • • Nylas Nylon/Fiberglass Frame
  • • Speaker Connector – 2 PIN waterproof Delphi Style (same as REVO)
  • • 2 Year Warranty

Kicker 44KXMA400.4 Amplifier

The KXM 400-watt four-channel amplifier is flexible enough to be a full system solution, or serve as the power for your mid and high-range speakers. KickEQ+™ delivers as much as an 18dB of extra bump with a simple turn of the knob, and powerful 24dB crossover is also included to letting you quickly tune your system to perfection.

Features:

  • Class D Power Plant
  • Gain Control With "Optimal Input" Indicator
  • FIT2™ (Fail-Safe Integration Technology) Circuitry
  • Variable 24dB Crossover
  • DSP-Controlled Preamp
  • KickEQ+™ 18dB Variable Bass Boost
  • ABYC/NMMA Compliant Power Terminals
  • Conformal-Coated Circuit Boards
  • Easy Access to Settings behind Gasket-Sealed Cover Panel
  • Black Anodized Aluminum Chassis
  • Top-Mounted Teal LED Light Pipe
  • Stainless Steel Mounting Hardware Included

RECON 6 Power & Sound Specifications

Impedance 4 Ohms
RMS Watts 60
Peak Watts 120
Frequency Response 40Hz to 20KHz
Sensitivity 89 dB @ 1 Watt / 1 Meter
Mid Bass 6.5 inch Component Style Coaxial Speaker.
High Frequency .75" Aluminum Dome Tweeter

RECON 6 Physical Specifications

Diameter 6.8 inches w/grill (172.72 mm)
Mounting Depth 2.6 inches (60.04mm)
Hole Cut Out 5.0 inches (127mm)

44KXM400.4 Specifications

RMS Power [Watts]
@ 14.4V, 4Ω stereo, ≤ 1% THD+N: 50 x 4
@ 14.4V, 2Ω stereo, ≤ 1% THD+N: 100 x 4
@ 14.4V, 4Ω bridged mono, ≤ 1% THD+N: 200 x 2
Length [in, cm]
11-316 , 28.4
Height [in, cm]
2-⅛, 5.5
Width [in, cm]
8-516 , 21
Frequency Response [Hz]
10Hz–20kHz
Input Sensitivity:
250mV–10V
Signal-to-Noise Ratio
95dB
Selectable Electronic Crossover
Amp 1: OFF/HP/LP; Variable 10–5,000Hz with X10 switch
Amp 2: OFF/HP/LP/BP; Variable HP, 10–500Hz;
Variable LP, 40–5,000Hz with 10X switch
Slope: 24dB/octave
KickEQ™ Bass Boost
0-18dB @ 40Hz
CEA Power
50 x 4 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts)
CEA Signal-to-Noise Ratio
-75dB CEA-2006B (ref: 1W, A-weighted)

44KXM400.4 Features

Test Tones

In any audio system, the goal is to reach maximum input and output levels without distortion or clipping. Sometimes, without expensive or complicated equipment like an oscilloscope, this can be a daunting task for a would-be-audiophile install. Thankfully, the engineers at KICKER have taken the guesswork, and hassle, out of matching the output voltage of your source unit to the amplifier. To begin, you’ll need to download the KICKER test tones from our Knowledge Base HERE.


SHOCwave™ Reveals The Bass

The SHOCwave™ Bass Restoration processor reveals the depth and power hidden in your digital recordings. This advanced processor is built into all mono and five-channel KX amplifiers, and easily controlled with the wireless KXARC remote (included).

Power Plant

You want high efficiency, monster wattage and small amp size. One ohm stability* and Class D construction means KICKER® amps fit nearly anywhere, with up to 2,400 watts of bone-shaking power.
*Mono models and subwoofer output of KXA800.5.


KickEQ+

Enjoy an enormous 18dB of variable bass boost with KickEQ+™. A simple turn of the knob gives you the extra bump you’ve been looking for.


Use Any Radio

KX Amplifiers come loaded with FIT2™ (Fail-Safe Integration Technology) advanced circuitry for superior clarity and dependability that works with nearly every radio on the planet.

44 KX Amplifier Videos


Extra Information

Brand:
Wet Sounds
Weight:
17.00 LBS
UPC:
841992131866
Bundle:
Yes
Feature 1:
Impedance: 4 ohms
Feature 2:
RMS Watts: 62
Feature 3:
PEAK Watts: 122
Feature 4:
Gain Control With "Optimal Input" Indicator
Feature 5:
DSP-Controlled Preamp
Condition:
NEW
Manufacturer SKU:
WSBDL190228-31
Weight:
17.0000 lbs
ASIN:
B07PRVLYF4
Shipping:
Free 2-Day Shipping!

Warranty Information

Click image to download warranty PDF