Included in this kit
JL Audio 12W0v3-4 with JD250/1 Bass Package - 12" W0 Subwoofer with 250 Watt Monoblock Amplifier
W0v3 12-inch Subwoofer Driver (300 W, 4 Ω)
The 12W0v3 is a rugged performer with excellent efficiency, excursion capability and linearity. Its overall performance envelope that puts it right at the top of its price class. It features a beefy 2 in. diameter voice coil and our patented Elevated Frame Cooling design for enhanced power handling and reliability.
The 12W0v3 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a moderately sized 1.375 cu. ft. (38.9 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure.
JL Audio JD250/1: Monoblock Class D Subwoofer Amplifier, 250 W
JD Amplifiers redefine a high-value package in terms of performance and efficiency. JL Audio’s NexD™ switching technology and clipping indicators (for ease in setting Input Sensitivity), add tremendous bang for your buck. Their dual-range, differential-balanced inputs minimize noise, while maximizing compatibility with a wide range of signal levels. Monoblock models also include variable bass boost and Remote Level Control capability when used with an optional RBC-1 Remote Bass Control.
They fit nearly anywhere!JD1000/1: 11.40 x 7.50 x 2.10 in. (290 x 190 x 53 mm). High-mass heat sink improves thermal capacity leading to reduced incidence of shut-down events.
NexD™ Switching Amplifier Technology: Our high-speed switching technology delivers outstanding fidelity with very low noise and distortion. Exceptional efficiency results in reduced current draw and heat, permitting reliable high power output within a very small chassis. Specifically optimized for subwoofer applications (7 Hz - 500 Hz bandwidth).
Complete Signal Processing Package: 12dB/octave low-pass filter, non-defeatable, with fully variable filter frequency selection from 50-500 Hz. Adjustable 0 to +12 dB Bass Boost EQ @ 45 Hz. Remote level control with optional controller (RBC-1). Preamp outputs (buffered, pass-through type)
Dual-Range, Differential-Balanced Inputs and Automatic Turn-On CapabilitiesBenefits: NO NOISE! Outstanding noise rejection prevents alternator whine and other noises. Accepts line-level or speaker level signals (up to 8V RMS), including those from factory systems, without a line-output converter (LOC): just splice wires to a pair of RCA ends or RCA cables. Automatic turn-on option via Signal-Sensing or DC-Offset sensing
Integrated LED Clipping Indicator for Easy Setup: Simplifies input-sensitivity setting by providing accurate visual feedback of output clipping level.1) Disconnect one speaker output wire, 2) Play full-scale (0 dBfs) sine-wave through audio system, with head unit at 3/4 volume and tone controls set flat, 3) Adjust input sensitivity until light turns on, then back off slightly. Separate, top-mounted LEDs report overall status and condition
JL Audio 12W0v3-4
W0v3 12-inch Subwoofer Driver (300 W, 4 Ω)
The 12W0v3 is a rugged performer with excellent efficiency, excursion capability and linearity. Its overall performance envelope that puts it right at the top of its price class. It features a beefy 2 in. diameter voice coil and our patented Elevated Frame Cooling design for enhanced power handling and reliability.
The 12W0v3 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a moderately sized 1.375 cu. ft. (38.9 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure.
General Specs
| Continuous Power Handling (RMS) | 300 W |
| Recommended Amplifier Power (RMS) | 75 - 300 W |
| Nominal Impedance (Znom) | 4 Ω |
Physical Specifications
| Nominal Diameter | 12.0 in / 300 mm |
| Overall Diameter (A) | 12.52 in / 318 mm |
| Mounting Hole Diameter (B) | 11.0625 in / 281 mm |
| Bolt Hole Circle Diameter (C) | 11.7 in / 297 mm |
| Motor Outer Diameter (D) | 5.05 in / 128 mm |
| Mounting Depth (E) | 5.40 in / 137 mm |
| Driver Displacement | 0.048 cu ft / 1.36 L |
| Net Weight | 8.11 lb / 3.68 kg |
Parameters
| Free Air Resonance (Fs) | 28.43 Hz |
| Electrical “Q” (Qes) | 0.715 |
| Mechanical “Q” (Qms) | 10.709 |
| Total Speaker “Q” (Qts) | 0.67 |
| Equivalent Compliance (Vas) | 2.530 cu ft / 71.64 L |
| One-Way Linear Excursion (Xmax)* | 0.45 in / 11.4 mm |
| Reference Efficiency (no) | 0.22% |
| Efficiency (1 W / 1 m)** | 85.64 dB SPL |
| Effective Piston Area (Sd) | 74.509 sq in / 0.0481 sq m |
| DC Resistance (Re) | 4.280 Ω |
JL Audio JD250/1
JL Audio JD250/1: Monoblock Class D Subwoofer Amplifier, 250 W
JD Amplifiers redefine a high-value package in terms of performance and efficiency. JL Audio’s NexD™ switching technology and clipping indicators (for ease in setting Input Sensitivity), add tremendous bang for your buck. Their dual-range, differential-balanced inputs minimize noise, while maximizing compatibility with a wide range of signal levels. Monoblock models also include variable bass boost and Remote Level Control capability when used with an optional RBC-1 Remote Bass Control.
They fit nearly anywhere!JD1000/1: 11.40 x 7.50 x 2.10 in. (290 x 190 x 53 mm). High-mass heat sink improves thermal capacity leading to reduced incidence of shut-down events.
NexD™ Switching Amplifier Technology: Our high-speed switching technology delivers outstanding fidelity with very low noise and distortion. Exceptional efficiency results in reduced current draw and heat, permitting reliable high power output within a very small chassis. Specifically optimized for subwoofer applications (7 Hz - 500 Hz bandwidth).
Complete Signal Processing Package: 12dB/octave low-pass filter, non-defeatable, with fully variable filter frequency selection from 50-500 Hz. Adjustable 0 to +12 dB Bass Boost EQ @ 45 Hz. Remote level control with optional controller (RBC-1). Preamp outputs (buffered, pass-through type)
Dual-Range, Differential-Balanced Inputs and Automatic Turn-On CapabilitiesBenefits: NO NOISE! Outstanding noise rejection prevents alternator whine and other noises. Accepts line-level or speaker level signals (up to 8V RMS), including those from factory systems, without a line-output converter (LOC): just splice wires to a pair of RCA ends or RCA cables. Automatic turn-on option via Signal-Sensing or DC-Offset sensing
Integrated LED Clipping Indicator for Easy Setup: Simplifies input-sensitivity setting by providing accurate visual feedback of output clipping level.1) Disconnect one speaker output wire, 2) Play full-scale (0 dBfs) sine-wave through audio system, with head unit at 3/4 volume and tone controls set flat, 3) Adjust input sensitivity until light turns on, then back off slightly. Separate, top-mounted LEDs report overall status and condition
| @ 4 Ω | 150 W RMS x 1 |
| @ 3 Ω | 200 W RMS x 1 |
| @ 2 Ω | 250 W RMS x 1 |
General Specs
| Frequency Response | 10 Hz - 150 Hz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >97 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >76 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω | >1000 / 50 Hz |
| Damping Factor @ 2 Ω | >500 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Input Voltage Range @ High-Level Inputs | 2 V - 10 V RMS |
| Min.Copper Power / Ground Wire Gauge | 8 AWG wire |
| Fuse Rating | 30 A (AFS, AGU or MaxiFuse™) |
Signal Processing
| Filter Mode(s) | Low-Pass only |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz - 200 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | No |
| Filter Defeat Function | No |
| Infrasonic Filter | none |
| Bass Boost EQ | 0 to +12 dB @ 45 Hz |
| Output Polarity Switch | No |
| Remote Subwoofer Level Control | Optional (RBC-1) |
| Remote Bass EQ Boost Control | No |
| Pass-Through Preamp Output | Unbuffered |
Physical Specs
| Height (H) | 2.10 in / 53 mm |
| Width (W) | 9.50 in / 242 mm |
| Depth (D) | 7.50 in / 190 mm |
- SKU:
- 12w0v3-4+Jx250/1
- UPC:
- 841992102125
- Condition:
- New
- Availability:
- In stock and ready to ship!
- Shipping:
- Free 2-Day Shipping!
JL Audio Warranty
| Mobile Audio Subwoofer Drivers | JL Audio Subwoofer Drivers are warrantied against defects in materials and workmanship for One (1) Year from purchase date. |
| Mobile Audio Amplifiers and Electronic Products | JL Audio Amplifiers and Electronics are warrantied against defects in materials and workmanship for Two (2) Years from purchase date. |
| Mobile Audio Speaker Systems | JL Audio Speaker Systems are warrantied against defects in materials and workmanship for One (1) Year from purchase date. |
| Mobile Audio Engineered Connection Systems | JL Audio Engineered Connection Systems are warrantied against defects in materials and workmanship for Two (2) Years from purchase date. |
| Mobile Audio Enclosed Subwoofer Systems | JL Audio Enclosed Subwoofer Systems are warrantied against defects in materials and workmanship for Two (2) Years from purchase date. |
| Stealthbox® Subwoofer Systems | JL Audio Stealthbox® Subwoofer Systems are warrantied against defects in materials and workmanship for Two (2) Years from purchase date. |
| Marine Speaker Systems and Subwoofers | JL Audio Marine Speaker Systems and Subwoofers are warrantied against defects in materials and workmanship for Two (2) Years from purchase date. |
| Marine Amplifiers and Electronics | JL Audio Marine Amplifiers and Electronics are warrantied against defects in materials and workmanship for Two (2) Years from purchase date. |
| Marine Engineered Connection Systems | JL Audio Engineered Connection Systems are warrantied against defects in materials and workmanship for Two (2) Years from purchase date. |
| SlamPak™ Powersports Audio Systems | JL Audio SlamPak™ Systems are warrantied against defects in materials and workmanship for Two (2) Years from purchase date. |
| Stealthbox® Powersports Subwoofer Systems | JL Audio Stealthbox® Subwoofer Systems are warrantied against defects in materials and workmanship for Two (2) Years from purchase date. |
Size: |
12 Inch |
UPC: |
841992102125 |
Bundle: |
Yes |
Feature 1: |
The term ”overbuilt” gets thrown around a lot, but in the case of the W0v3’s, it actually applies. With beefy 2.0 or 2.5-inch voice coils and our patented Elevated-Frame Cooling, they’re certainly capable of handling power. |
Feature 2: |
Proprietary DMA-optimized motor systems offer best-in-class excursion capability, with increased output and better sound quality. |
Feature 3: |
In simple terms, when the going gets loud, the W0v3’s are built to perform like no other woofers in their price class, making them the “go to” choice for those seeking high performance from an affordable subwoofer system. |
Feature 4: |
When you inspect a JD amplifier, you will see that nothing is spent on gimmicks or chrome. Instead, you'll see specified oversized output transistors and rugged MOSFET power supplies that ensure ample current and thermal capacity |
Feature 5: |
These beefy parts operate well under their limits to deliver stable performance and significantly more reliability than the wimpy devices commonly found in many competing products. |
Condition: |
NEW |
Manufacturer SKU: |
12w0v3-4+Jx250/1 |
Weight: |
17.0000 lbs |
