Description
AP4.9 bit - 4 CH AMPLIFIER WITH 9 CH DSP 4x130W
AP4.9 bit amplifier was designed for the Integration into OEM front/rear systems where a lot of power is required. The built-in processor, that this amplifier shares with the AP8.9 bit, provides the ability to assign the pre-outs to the AP1 D amplifier to drive a subwoofer, to the AP4 D amplifier to have 4 additional amplified channels exceeding 1080 W @ 4 - 2 Ω total power.
Amplifier Stage -
Distortion - THD @ 1 kHz, 4 Ω, 90% Output Power: 0.10 %
Bandwidth @ -3 dB, 2 V RMS, 4Ω: 10 ÷ 20k Hz
S/N ratio @ A weighted, 2V, Output Power: 95 dBA
Damping factor @ 1 kHz, 2 V RMS, 4Ω: >170
Input sensitivity: 2 ÷ 15 V RMS
Input impedance: 15k Ω
Power Supply -
Voltage: 7.5 ÷ 15 VDC
Idling current: 1.32 A
Switched off: <2 mA
Consumption @ 14.4 VDC 2Ω Max Musical Power (without CPL): 30 A
Remote IN 7 ÷ 15 VDC (1 mA)
Remote OUT 11 ÷ 15 VDC (200 mA)
Fuse 30 A
ART (Automatic Remote Turn on/off) Speakers to input - selectable
AST (Automatic Signal Turn on/off) Pre-In to input - selectable
CPL (Continuous Power Limiting) Max continuous power - selectable
AP4.9 bit amplifier was designed for the Integration into OEM front/rear systems where a lot of power is required. The built-in processor, that this amplifier shares with the AP8.9 bit, provides the ability to assign the pre-outs to the AP1 D amplifier to drive a subwoofer, to the AP4 D amplifier to have 4 additional amplified channels exceeding 1080 W @ 4 - 2 Ω total power.
Amplifier Stage -
Distortion - THD @ 1 kHz, 4 Ω, 90% Output Power: 0.10 %
Bandwidth @ -3 dB, 2 V RMS, 4Ω: 10 ÷ 20k Hz
S/N ratio @ A weighted, 2V, Output Power: 95 dBA
Damping factor @ 1 kHz, 2 V RMS, 4Ω: >170
Input sensitivity: 2 ÷ 15 V RMS
Input impedance: 15k Ω
Power Supply -
Voltage: 7.5 ÷ 15 VDC
Idling current: 1.32 A
Switched off: <2 mA
Consumption @ 14.4 VDC 2Ω Max Musical Power (without CPL): 30 A
Remote IN 7 ÷ 15 VDC (1 mA)
Remote OUT 11 ÷ 15 VDC (200 mA)
Fuse 30 A
ART (Automatic Remote Turn on/off) Speakers to input - selectable
AST (Automatic Signal Turn on/off) Pre-In to input - selectable
CPL (Continuous Power Limiting) Max continuous power - selectable
Used Frequently Asked Questions
- What does used mean? Used products may be unused customer returns that are essentially "new" items, or they may be previously installed products that were returned under warranty or during our return policy period.
- What is the warranty? All of our used items come with a 90-day warranty.
- What's it look like? All of our used items are inspected and graded by our returns team at our facilities. They will test them and grade them to one of four standard gradings: Used Open Box, Used Very Good, Used Good, and Used Acceptable. Please see the following descriptions of each grade - also note that if an item falls under ANY of the criteria for a certain grade, even though the rest of the product is better, we will give it the lowest grade.
- Used Open Box An item in perfect working condition. Original protective wrapping may be missing, but the original packaging is intact and in good condition with minor damage possible. Instructions are included.
- Used Very Good A well-cared-for item with limited use, remains in good working condition. The item may show some limited signs of wear,small scratches,cosmetic blemishes. Item may arrive with damaged packaging or be repackaged and could be missing some accessories.
- Used Good The item shows wear from use, remains in good condition and functions properly. May have damaged packaging or be repackaged. It may be marked, have identifying markings on it, have minor cosmetic damage. It may be missing some parts or accessories.
- Used Acceptable The item is fairly worn but continues to function properly. While repackaged; signs of wear can include aesthetic issues; scratches, dents. The item may have markings on it or show signs of previous use. Item may be missing some parts or accessories.
- Have more questions? Call us, send us a chat, or an email. We'll be able to answer any additional questions you may have.