Description
Digital Signal Processor (4 -Channels In, 6 Channles Out, Sp-Dif/Btm/Bts/Bts-Ld4c Inputs)
Mosconi ATOMO 4TO6 DSP Features:
• Stand Alone DSP
• Four analog inputs (HighLevel / LowLevel)
• SP-Dif (optical), BTM, BTS & BTS-LD4C input
• 6 analog outputs.
• 12V and 24V vehicles compatible.
• New 64 bit DSP plattform with dISC functions.
• Complete integrated measuring system for RTA, timedelay and phase.
• Easy setup function.
• Direct RTC connection for volume, sublevel or input volume.
• Compatible to RC-Can VW, RC-Can uni and EXT4HLin (8ch. input analog possible).
• Dimensions 86 x 65 x 34mm
• Weight 180g
Specifications:
• Power Supply Voltage: 8 -32V
• External Fuse: 1 x 3A
• Current consumption: 0.14A @ 12V6
• Analog DSP processed output: 6 x 2Vrms
• Analog input: 4 x high/low level
• Low level + High level input sensitivity range: 2Vrms (LL) – 12Vrms [6:1] (HL) by default
• Input impedance: >15k Ohm (LL) -1k8 Ohm / ~22 Ohm (HL)
• Low Level Ground Reference: Full Floating / ~22 Ohm
• Autosense power-on: Available by High Level, BTL source only
• Digital input Optical (Toslink)
• CARD (MOS standard modules and Extended cards)
• Onboard DSP: 294.912 MHz – 64 bit
• Onboard ADO: 48kHz / 24bit Sample Rate – 107dB S/N ratio
• Onboard DAC: 48kHz / 24bit Sample Rate – 106dB S/N ratio
• Remote Control (optional): RTC
• Dimensions: 86 x 65 x 34mm
• Weight: 180g
• Finish: Black anodized
Mosconi ATOMO 4TO6 DSP Features:
• Stand Alone DSP
• Four analog inputs (HighLevel / LowLevel)
• SP-Dif (optical), BTM, BTS & BTS-LD4C input
• 6 analog outputs.
• 12V and 24V vehicles compatible.
• New 64 bit DSP plattform with dISC functions.
• Complete integrated measuring system for RTA, timedelay and phase.
• Easy setup function.
• Direct RTC connection for volume, sublevel or input volume.
• Compatible to RC-Can VW, RC-Can uni and EXT4HLin (8ch. input analog possible).
• Dimensions 86 x 65 x 34mm
• Weight 180g
Specifications:
• Power Supply Voltage: 8 -32V
• External Fuse: 1 x 3A
• Current consumption: 0.14A @ 12V6
• Analog DSP processed output: 6 x 2Vrms
• Analog input: 4 x high/low level
• Low level + High level input sensitivity range: 2Vrms (LL) – 12Vrms [6:1] (HL) by default
• Input impedance: >15k Ohm (LL) -1k8 Ohm / ~22 Ohm (HL)
• Low Level Ground Reference: Full Floating / ~22 Ohm
• Autosense power-on: Available by High Level, BTL source only
• Digital input Optical (Toslink)
• CARD (MOS standard modules and Extended cards)
• Onboard DSP: 294.912 MHz – 64 bit
• Onboard ADO: 48kHz / 24bit Sample Rate – 107dB S/N ratio
• Onboard DAC: 48kHz / 24bit Sample Rate – 106dB S/N ratio
• Remote Control (optional): RTC
• Dimensions: 86 x 65 x 34mm
• Weight: 180g
• Finish: Black anodized
Used Frequently Asked Questions
- What does used mean? Used products may be unused customer returns that are essentially "new" items, or they may be previously installed products that were returned under warranty or during our return policy period.
- What is the warranty? All of our used items come with a 90-day warranty.
- What's it look like? All of our used items are inspected and graded by our returns team at our facilities. They will test them and grade them to one of four standard gradings: Used Open Box, Used Very Good, Used Good, and Used Acceptable. Please see the following descriptions of each grade - also note that if an item falls under ANY of the criteria for a certain grade, even though the rest of the product is better, we will give it the lowest grade.
- Used Open Box An item in perfect working condition. Original protective wrapping may be missing, but the original packaging is intact and in good condition with minor damage possible. Instructions are included.
- Used Very Good A well-cared-for item with limited use, remains in good working condition. The item may show some limited signs of wear,small scratches,cosmetic blemishes. Item may arrive with damaged packaging or be repackaged and could be missing some accessories.
- Used Good The item shows wear from use, remains in good condition and functions properly. May have damaged packaging or be repackaged. It may be marked, have identifying markings on it, have minor cosmetic damage. It may be missing some parts or accessories.
- Used Acceptable The item is fairly worn but continues to function properly. While repackaged; signs of wear can include aesthetic issues; scratches, dents. The item may have markings on it or show signs of previous use. Item may be missing some parts or accessories.
- Have more questions? Call us, send us a chat, or an email. We'll be able to answer any additional questions you may have.