Description
DS18 CF-X6TP 6.5-Inch Marine Tower Speakers with RGB LEDs, 100W RMS, Black Carbon-Fiber Finish, Pair
Give your marine or powersports tower two-way audio and RGB lighting with a pair of carbon-fiber-finish pods that rotate to aim the sound where you want it.
Overview
Full-range sound above the deck or roll cage
The CF-X6TP combines a 6.5-inch woofer and dome tweeter inside each marine tower enclosure. Rated at 100W RMS and 300W maximum, each 4-ohm speaker covers 65Hz–23kHz. The black carbon-fiber finish distinguishes this pair from the other NXL-X6TP finishes, while integrated RGB lighting adds color to the speakers, surrounding acrylic rings, and rear logos.
Key features
CF-X6TP at a glance
- A pair of 6.5-inch two-way tower speakers brings full-range music to marine and powersports installations.
- Adjustable die-cast clamps fit 1- to 2-inch bars and rotate 360 degrees so you can direct the sound.
- Each 4-ohm speaker handles 100W RMS, with 91dB sensitivity and a 65Hz–23kHz response for outdoor listening.
- Integrated RGB lighting highlights the speakers, acrylic rings, and rear logos to coordinate with your build.
- IP65-rated, UV-stable housings combine a black carbon-fiber finish with polypropylene cones and butyl surrounds.
Design and installation
Aim the towers and route the wiring
Die-cast clamps accommodate bars from 1 to 2 inches in diameter and allow 360-degree rotation. The mounting system supports concealed or exposed wire routing, and DS18 includes NBR pads, stainless hardware, a hex wrench, safety rope, and screw-fastening adhesive. Rotatable front and rear logos let you align the branding after installation.
Performance
| Sold as | Pair |
| Nominal diameter | 6.5 in |
| Nominal impedance | 4 ohms |
| RMS power handling | 100W |
| Maximum power handling | 300W |
| Sensitivity (1W/1m) | 91dB |
| Frequency response | 65Hz–23kHz |
| Recommended high-pass crossover | 80Hz |
Enclosure and mounting
| Finish | Black carbon-fiber finish |
| Enclosure material | Injection-molded PC+ABS |
| Water resistance | IP65 |
| UV stability | Yes |
| Lighting | RGB speaker, acrylic-ring, and rear-logo LEDs |
| Wiring | Six-core lighting and speaker wiring |
| Clamps | Die-cast; 1–2 in bars; 360-degree rotation |
| Wire routing | Concealed or exposed |
| Logos | Rotatable front and rear |
Driver construction
| Woofer voice coil | 1.2 in |
| Woofer cone | Waterproof injection-molded polypropylene |
| Surround | Butyl |
| Basket | PC injection-molded composite |
| Woofer magnets | Ferrite and reverse neodymium; Y35/N40H |
| Tweeter voice coil | 1 in |
| Tweeter design | Dome with PEI surround |
| Tweeter magnet | Neodymium |
| Internal crossover | 6dB/octave |
| Passive radiator | No |
Dimensions
| Overall diameter | 6.93 in |
| Overall depth | 11.37 in |
| Overall height | 10.7 in |