Description
MB Quart Discus DA2-500.5D compact waterproof 500 watt five channel amplifier with top mounted controls, potted internals, and waterproof connectors. Bass remote is included.
Fitment: Universal.
Specs: class: Class D; channels: 5 channels; max power: 500W; 1 Ohm power: 1 x 350 Watts: CH5 Only; 2 Ohms power: 4 x 50 + 1 x 225; 4 Ohms power: 4 x 35 + 1 x 150; bridged 4 Ohms: 2 x 100 CH1-4; crossover: Electronic; high pass: CH1 & CH2: Switched Full/HPF Level 0.2V-9V, CH3 & CH4: Switched Full/HPF Level 0.2V-9V; low pass: CH5 ONLY: 50Hz-150Hz; bass boost: Switchable 0dB and 12dB; subsonic filter: CH5 ONLY: 15Hz-50Hz; variable voltage: 0.2V-9V; fusing: 40A External; power terminal: 4 AWG; speaker terminal: 12 AWG.
Features: marine protection: Meets or exceeds IP67 standards for waterproof and dustproof.; preamplifier: Q-Stasis Pre Amplifier Stage: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.; RCA inputs: Prewired to PC Board for additional protection. Leave connector cover closed on RCA jacks that are not used.; operation mode: 2 / 4 / 5 Channel; crossover type: Variable electronic crossovers allow for complete control of the sound.; equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier.; topology: Class D: Highly efficient circuit topology which helps the amplifier develop a lot of power in a compact heatsink.; output device: MB Quart output devices, FLUID-FETS are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest end home amplifiers.; heat sink: Heavy duty heat-sink efficiently moves heat from the MOSFET where it can be cooled.; bass remote: Included: Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle..
Fitment: Universal.
Specs: class: Class D; channels: 5 channels; max power: 500W; 1 Ohm power: 1 x 350 Watts: CH5 Only; 2 Ohms power: 4 x 50 + 1 x 225; 4 Ohms power: 4 x 35 + 1 x 150; bridged 4 Ohms: 2 x 100 CH1-4; crossover: Electronic; high pass: CH1 & CH2: Switched Full/HPF Level 0.2V-9V, CH3 & CH4: Switched Full/HPF Level 0.2V-9V; low pass: CH5 ONLY: 50Hz-150Hz; bass boost: Switchable 0dB and 12dB; subsonic filter: CH5 ONLY: 15Hz-50Hz; variable voltage: 0.2V-9V; fusing: 40A External; power terminal: 4 AWG; speaker terminal: 12 AWG.
Features: marine protection: Meets or exceeds IP67 standards for waterproof and dustproof.; preamplifier: Q-Stasis Pre Amplifier Stage: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.; RCA inputs: Prewired to PC Board for additional protection. Leave connector cover closed on RCA jacks that are not used.; operation mode: 2 / 4 / 5 Channel; crossover type: Variable electronic crossovers allow for complete control of the sound.; equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier.; topology: Class D: Highly efficient circuit topology which helps the amplifier develop a lot of power in a compact heatsink.; output device: MB Quart output devices, FLUID-FETS are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest end home amplifiers.; heat sink: Heavy duty heat-sink efficiently moves heat from the MOSFET where it can be cooled.; bass remote: Included: Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle..