Description
Included in this kit
This bundle includes a DS18 ION1600.4D 4-Channel | 2 x 800 @ 4Ω Bridge | 4 x 400 @ 2Ω | 4 x 240 @ 4Ω Watts RMS, a DS18 RY-KIT4.HD Ryder | 4-GA | For Harley Davidson, a DS18 MTLOC4 4-Ch High-to-Low Level Line Output Converter w/ Remote Turn-On, 2x DS18 PRO-ZT6 6.5" | 225 Watts RMS | 4Ω | Mid-Range | Water Resistant Cone, and 2x DS18 PRO-ZT69 6x9" | 275 Watts RMS | 4Ω | Mid-Range | Water Resistant Cone.
1x DS18 ION1600.4D 4-Channel | 2 x 800 @ 4Ω Bridge | 4 x 400 @ 2Ω | 4 x 240 @ 4Ω Watts RMS (ION1600.4D)
DS18 • ION1600.4D
DS18 ION1600.4D 4-Channel | 2 x 800 @ 4Ω Bridge | 4 x 400 @ 2Ω | 4 x 240 @ 4Ω Watts RMS
DS18 ION Compact Full-Range Class D 4-Channel Amplifier 4 x 240 Watts RMS @ 4-ohm
Minimum Impedance: 2 Ohm (St) / 4 Ohms (Bridge)
RMS Power @ 4 ohm: 4 x 240W
Total Watts (Peak): 4800W
Frequency Response: 10Hz-20KHz
Amplifier Class: Digital
RMS Power @ 2 ohm: 4 x 400W
Overview
Product Overview
DS18 ION Compact Full-Range Class D 4-Channel Amplifier 4 x 240 Watts RMS @ 4-ohm
ION1600.4D, the perfect digital micro amplifier addition to your car audio system for boosting performance ensuring a premium listening experience!
Highlights
Key Product Features
- 4 Channel Full Range
- Class D
- 2 - 4 Ohm Stable
- 4 X 240 Watts @ 4 Ohm
- Power / Clip / Protection Indicator
SPECS
| SKU | ION1600.4D |
| Total Watts (Peak) | 4800W |
| RMS Power @ 4 ohm | 4 x 240W |
| RMS Power @ 2 ohm | 4 x 400W |
| RMS Power @ 1 ohm | N/A |
| RMS Power @ 4 ohm Bridge | 2 x 800W |
AUDIO
| Frequency Response | 10Hz-20KHz |
| Signal to Noise Ratio | >95dB |
| Efficiency @ 4 ohm | 88% |
| Damping Factor | 210 |
| Input Impedance | 27Kohms |
| Channel Separation | 59dB |
| Total Harmonic Distortion (THD) | 0.01% |
| Low Level Input Range | 0.2-6V |
| High Level Input | Yes |
| Selectable X-Over | LPF/HPF/FULL |
| X-Over Filter Range | 40Hz-2KHz |
| Bass Boost Range | NO |
| Bass Boost Frequency | 45Hz |
FEATURES
| Amplifier Class | Digital |
| Amplifier Type | Full-Range Stereo |
| Number of Channels | 4 |
| Minimum Impedance | 2 Ohm (St) / 4 Ohms (Bridge) |
| Led Indicator | Power / Protect / Clipping |
| Power Input Terminal Size | 4 AWG |
| Fuse Size | 140A (external) |
| Remote Level Control | No |
| Cooling Fan | Yes |
| Thermal Protection | Yes |
| Over-Load Protection | Yes |
| DC Output Protection | Yes |
| Short Circuit Output Protection | Yes |
| Voltage Input Protection | Yes |
| Clipping Protection | Yes |
| Body Color / Finish | Aluminum Black / Silver |
EXTRA FEATURES
| Hi-Level Speaker connector | Yes |
| Tiffany RCA Terminal | Yes |
| LED Clip Indicator | Yes |
| High Efficiency Micro Digital Design | Yes |
MEASUREMENT
| Overall Length | 7.32" / 186mm |
| Overall Wide | 4.72" / 120mm |
| Overall Height | 2" / 52mm |
| Heatsink Length | 6" / 153mm |
| Gross Single Unit Weight | 1.3Kg |
1x DS18 RY-KIT4.HD Ryder | 4-GA | For Harley Davidson (RY-KIT4.HD)
DS18 • RY-KIT4.HD
DS18 RY-KIT4.HD Ryder | 4-GA | For Harley Davidson
DS18 RY-KIT4.HD 4-GA Amplifier OFC Installation Kit for Motorcycle, Powersports and Marine.
Amplifier Compatibility: Suitable for Amplifier(s) up to 1680W Power
Dimensions L x W x H (Inches): 12.75 x 5.5 x 2.25
Compatibility: Fits 1996-up HD models including FLHT, FLHX, FLTR, and some TRIKEs
Fuse Protection: Fuse Holder In-Line Waterproof, 120A Mini-ANL Fuse pre-installed on the Fuse Holder
Power Wiring: Wire Length (6ft) 4AWG Red + (6ft) 4AWG Black OFC tinned Wire
Additional Protection: Protective braided sleeve and heat shrink
Overview
Product Overview
DS18 RY-KIT4.HD 4-GA Amplifier OFC Installation Kit for Motorcycle, Powersports and Marine.
This kit helps in the installation of an extra amplifier on Harley Davidson models from 1996 and later including the Electra Glide (FLHT), Street Glide (FLHX), Road Glide (FLTR) and some TRIKE’s.
Highlights
Key Product Features
- 4 GA OFC Ultra Flex Amplifier Wire Kit
- Up to 1680 Watts RMS
- Mini ANL Fuse Holder with 120A
- Power, Remote Wires & Accessories
- Motorcycle ~ Powersports ~ Marine
SPECS
| SKU | RY-KIT4.HD |
| Compatibility | Fits 1996-up HD models including FLHT, FLHX, FLTR, and some TRIKEs |
| Fuse Protection | Fuse Holder In-Line Waterproof, 120A Mini-ANL Fuse pre-installed on the Fuse Holder |
| Power Wiring | Wire Length (6ft) 4AWG Red + (6ft) 4AWG Black OFC tinned Wire |
| Additional Protection | Protective braided sleeve and heat shrink |
| Amplifier Compatibility | Suitable for Amplifier(s) up to 1680W Power |
| Nickel Plated | Ensures optimal conductivity and corrosion resistance |
| Remote Wiring | Wire Length (2ft) 18AWG Blue OFC tinned Remote Wiring |
SHIPPING INFO
| Dimensions L x W x H (Inches) | 12.75 x 5.5 x 2.25 |
| Weight | 2.5 |
| M/C Dimensions L x W x H (Inches) | 13.5 x 12 x 12 |
| M/C Weight | 29.5 |
| M/C Pcs | 10 |
1x DS18 MTLOC4 4-Ch High-to-Low Level Line Output Converter w/ Remote Turn-On (MTLOC4)
The MTLOC4 converts four factory speaker outputs into four RCA outputs, expanding your upgrade options. It offers selectable input impedance (20, 60, or 20k ohms) to prevent factory system errors.
Effortless Amplifier Activation
Auto turn-on via audio detection, DC offset, or remote trigger allows plug-and-play convenience and reduces installation complexity.
Built Tough and Compact
Constructed with an anodized aluminum shell and surface mount components, the MTLOC4 resists interference and runs cool. Its small footprint fits most vehicle setups.
Crystal-Clear Sound
Delivering less than 0.01% THD from 10Hz to 20kHz, this converter keeps your audio sharp and clean.
Unlock the full potential of your factory system with the MTLOC4!
Key Features
4-Channel High-to-Low Conversion
Selectable Input Impedance (20 / 60 / 20k Ohms)
Auto Turn-On (Audio / DC / Remote)
Anodized Aluminum Shell & Noise Rejection
10Hz–20kHz Frequency Range (<0.01% THD)
Specifications
Maximum Speaker Level Input: Up to 40V (400 watts RMS)
Maximum Preamp Output: Up to 11V
Nominal Conversion Ratio: 4:1
Frequency Response: 10Hz - 20kHz
Total Harmonic Distortion: 0.01%
Signal To Noise Ratio: >110dB
Input Impedance: Selectable 20 / 60 / 20k ohms
Output Impedance: 100 ohms
Power Draw: 130mA
Recommended Fuse Rating: 1A
Features
Bass Boost: No
Auto Turn-On: Yes (Audio Sens / REM / DC)
Remote Output: Yes
Level Matching Controls: Yes
Dash Remote Level Control: No
Led Indicators: Power / Clip
Housing Material / Color: Aluminum / Black
Wiring Connector: 14ga Quick Connector
Ground Isolation: Selectable (200 ohms / Isolated / Grounded)
Step-Down Method: Transformer
Input Selector: Selectable (2ch / 4ch)
Measurement
Overall Length: 5.7" / 145mm
Overall Width: 3.5" / 88mm
Overall Height: 1.1" / 28mm
2x DS18 PRO-ZT6 6.5" | 225 Watts RMS | 4Ω | Mid-Range | Water Resistant Cone (PRO-ZT6)
DS18 • PRO-ZT6
DS18 PRO-ZT6 6.5" | 225 Watts RMS | 4Ω | Mid-Range | Water Resistant Cone
DS18 PRO-ZT6
Nominal Diameter: 6.5" (165.1 mm)
Nominal Impedance: 4 ohms
RMS Power Handing: 225 Watts
Maximum Power Handing: 450 Watts
Frequency Response: 85Hz-20kHz
Sensitivity (1w/1m): 97dB
Overview
Product Overview
6.5” Water Resistant Mid-Range Loudspeaker with Built-in Bullet Tweeter and Grill
Experience earth-shaking sound with the PRO-ZT6: a 2-way mid-range built for raw power, and full-range functionality. Packed into a rugged, water-resistant coaxial build.
Highlights
Key Product Features
- 6.5" Coaxial Water Resistant Mid-Range
- RMS Power: 225 Watts (450 Watts Peak)
- Impedance: 4-Ohm
- Ferrite & Neodymium Magnets
- Grill with Cloth Shade
SPECS
| SKU | PRO-ZT6 |
| Nominal Diameter | 6.5" (165.1 mm) |
| Nominal Impedance | 4 ohms |
| RMS Power Handing | 225 Watts |
| Maximum Power Handing | 450 Watts |
| Sensitivity (1w/1m) | 97dB |
| Frequency Response | 85Hz-20kHz |
| Recommended Hi Pass Crossover | 100 Hz |
| Sold as | Single Unit |
MOTOR
| Voice Coil Diameter | 1.5” (38.1 mm) |
| Voice Coil Former Material | Kapton |
| Winding Material | CCAW |
| Basket Material | Steel |
| Magnet Weight | 27 oz |
| Magnet Material | Ferrite |
| Cone Material | Water-Resistant Paper |
| Surround Material | Treated Cloth |
TWEETER
| Voice Coil Diameter | 1” |
| Voice Coil Material | KAPTON |
| Winding Material | CCAW |
| Diaphragm Material | Aluminum Alloy |
| Magnet Material | Neodymium (N35H) |
MEASUREMENTS
| Overall Diameter | 178 mm (7”) |
| Front Mount Baffle Cutout | 144 mm (5.67”) |
| Mounting Depth | 77 mm (3.03”) |
| Overall Depth | 97mm (3.81”) |
THIELE & SMALL PARAMETERS
| Vas | 4.72L / 0.16ft3 |
| Xmax | 1.65mm |
| Fs | 120Hz |
| Qms | 5.259 |
| Qes | 0.614 |
| Qts | 0.55 |
| Re | 3.2 Ohms |
2x DS18 PRO-ZT69 6x9" | 275 Watts RMS | 4Ω | Mid-Range | Water Resistant Cone (PRO-ZT69)
DS18 • PRO-ZT69
DS18 PRO-ZT69 6x9" | 275 Watts RMS | 4Ω | Mid-Range | Water Resistant Cone
6x9” Water Resistant Mid-Range Loudspeaker with Built-in Bullet Tweeter and Grill 550W 4-Ohm
Nominal Diameter: 6x9”
Nominal Impedance: 4 ohms
RMS Power Handing: 275 Watts
Maximum Power Handing: 550 Watts
Frequency Response: 60Hz-22KHz
Sensitivity (1w/1m): 98dB
Overview
Product Overview
6x9” Water Resistant Mid-Range Loudspeaker with Built-in Bullet Tweeter and Grill 550W 4-Ohm
Experience earth-shaking sound with the PRO-ZT69: a 2-way mid-range built for raw power, accurate reproduction, and crystal-clear clarity across the entire frequency range. Packed into a rugged, water-resistant coaxial build.
Highlights
Key Product Features
- 6X9" Coaxial Water Resistant Mid-Range
- RMS Power: 275 Watts (550W Peak)
- Impedance: 4-Ohm
- Ferrite & Neodymium Magnets
- Grill with Cloth Shade
SPECS
| SKU | PRO-ZT69 |
| Nominal Diameter | 6x9” |
| Nominal Impedance | 4 ohms |
| RMS Power Handing | 275 Watts |
| Maximum Power Handing | 550 Watts |
| Sensitivity (1w/1m) | 98dB |
| Frequency Response | 60Hz-22KHz |
| Recommended Hi Pass Crossover | 80 Hz |
| Sold as | Single Unit |
MIDRANGE
| Voice Coil Diameter | 1.5” (38.1 mm) |
| Voice Coil Former Material | Kapton |
| Winding Material | CCAW |
| Basket Material | Steel |
| Magnet Weight | 27 oz |
| Magnet Material | Ferrite |
| Cone Material | Water-Resistant Paper |
| Surround Material | Treated Cloth |
TWEETER
| Voice Coil Diameter | 1” |
| Voice Coil Material | KAPTON |
| Winding Material | CCAW |
| Diaphragm Material | ALUMINUM ALLOY |
| Magnet Weight | 0.44 oz |
| Magnet Material | NEODYMIUM (N38H) |
THIELE & SMALL PARAMETERS
| Vas | 14.6927 LTR |
| Xmax | 16 mm |
| Fs | 85 Hz |
| Qms | 3.906 |
| Qes | 0.639 |
| Qts | 0.549 |
| Re | 3.2 ohms |
MEASUREMENTS
| Overall Diameter | 260 x 180 mm (10.24 x 7.09”) |
| Front Mount Baffle Cutout | 219 x 150 mm (8.62 x 5.91”) |
| Mounting Depth | 85 mm (3.35”) |
| Overall Depth | 97 mm ( 3.81”) |