Description
Included in this kit
This bundle includes a DS18 G3600.4D 4-Channel | 2 x 740 @ 4Ω Bridge | 4 x 420 @ 2Ω | 4 x 300 @ 4Ω Watts RMS, a DS18 RY-KIT4.HD Ryder | 4-GA | For Harley Davidson, a DS18 MTLOC4 4-Ch High-to-Low Level Line Output Converter w/ Remote Turn-On, 2x DS18 PRO-CF6.4NR 6.5" | 250 Watts RMS | 4Ω | Mid-Bass | Neodymium, 2x DS18 PRO-CF69.4NR 6x9" | 300 Watts RMS | 4Ω | Mid-Bass | Neodymium, and 2x DS18 PRO-TWX1/BK 3.8" | Super Bullet | 120 Watts RMS | 1" Aluminum Vc | 4Ω | Black.
1x DS18 G3600.4D 4-Channel | 2 x 740 @ 4Ω Bridge | 4 x 420 @ 2Ω | 4 x 300 @ 4Ω Watts RMS (G3600.4D)
DS18 • G3600.4D
DS18 G3600.4D 4-Channel | 2 x 740 @ 4Ω Bridge | 4 x 420 @ 2Ω | 4 x 300 @ 4Ω Watts RMS
DS18 G3600.4D Full-Range Class D 4-Channel Car Audio Amplifier 3600 Watts
Minimum Impedance: 2 Ohm St / 4 Ohm Bridge
RMS Power @ 4 Ohm/14.4V: 4 x 300W
Peak Power: 3600W
Frequency Response: 20Hz-20KHz
Input Sensitivity: 0.25V - 6V
Channels: 4 CH
Overview
Product Overview
The Gen-X series has always been a DS18 staple with the public and been in countless system builds over the many years it was released.
We have completely redesigned the GEN-X series from the ground up to meet and audio enthusiasts high standards and complete their goals for the system of their dreams with great power, reliability, and efficiency.
Highlights
Key Product Features
- 4 Channel Full Range
- Class D
- 2 ~ 4 Ohm Stable
- 4 x 300 Watts @ 4 Ohm
- Power/Protection/Clip Indicator
SPECS
| SKU | G3600.4D |
| Class | Digital (D) |
| Amplifier Type | 4 CH Full Range |
| Channels | 4 CH |
| Peak Power | 3600W |
| RMS Power @ 4 Ohm/14.4V | 4 x 300W |
| RMS Power @ 2 Ohm/14.4V | 4 x 420W |
| RMS Power @ 4 Ohm/14.4V Bridged | 2 x 740W |
| Minimum Impedance | 2 Ohm St / 4 Ohm Bridge |
| Operation Voltage | 9 - 15V |
SPECS
| Frequency Response | 20Hz-20KHz |
| Signal/Noise Ratio | >90dB |
| Low Pass Filter | 50Hz - 250Hz |
| High Pass Filter | 50Hz - 250Hz |
| Subsonic | NO |
| Subsonic Frequency | N/A |
| Efficiency @ 4 Ohm | 80% |
| Damping Factor | 78 |
| THD % | 0.01 |
| Input Sensitivity | 0.25V - 6V |
| X-Over Filter Range | 50 - 250Hz |
| Bass Boost Range | N/A |
| Bass Boost Frequency | N/A |
| Phase Selector | NO |
SPECS
| High Level Input | NO |
| Selectable X-Over | LPF/FLAT/HPF |
| Led Indicator | Power / Protection / Clip |
| Voltage Input Protection | Yes |
| Clipping Protection | Yes |
| Thermal Protection | Yes |
| Cooling Fan | No |
| Speaker Output Size | 12GA |
| Power Input Size | 4GA |
| Fuse Rating | 120A |
| Remote Level Control | No |
| Body Color / Finish | Matte black |
MEASUREMENTS
| Product Weight (lb) | 4.5 |
| Product Dimensions L x W x H (Inches) | 13.75 x 6.25 x 3.25 |
| M/C Weight (lb) | 29.5 |
| M/C Dimensions L x W x H (Inches) | 14 x 13 x 10.5 |
| M/C Qty | 6 |
| Sold In | Single |
1x DS18 RY-KIT4.HD Ryder | 4-GA | For Harley Davidson (RY-KIT4.HD)
DS18 • RY-KIT4.HD
DS18 RY-KIT4.HD Ryder | 4-GA | For Harley Davidson
DS18 RY-KIT4.HD 4-GA Amplifier OFC Installation Kit for Motorcycle, Powersports and Marine.
Amplifier Compatibility: Suitable for Amplifier(s) up to 1680W Power
Dimensions L x W x H (Inches): 12.75 x 5.5 x 2.25
Compatibility: Fits 1996-up HD models including FLHT, FLHX, FLTR, and some TRIKEs
Fuse Protection: Fuse Holder In-Line Waterproof, 120A Mini-ANL Fuse pre-installed on the Fuse Holder
Power Wiring: Wire Length (6ft) 4AWG Red + (6ft) 4AWG Black OFC tinned Wire
Additional Protection: Protective braided sleeve and heat shrink
Overview
Product Overview
DS18 RY-KIT4.HD 4-GA Amplifier OFC Installation Kit for Motorcycle, Powersports and Marine.
This kit helps in the installation of an extra amplifier on Harley Davidson models from 1996 and later including the Electra Glide (FLHT), Street Glide (FLHX), Road Glide (FLTR) and some TRIKE’s.
Highlights
Key Product Features
- 4 GA OFC Ultra Flex Amplifier Wire Kit
- Up to 1680 Watts RMS
- Mini ANL Fuse Holder with 120A
- Power, Remote Wires & Accessories
- Motorcycle ~ Powersports ~ Marine
SPECS
| SKU | RY-KIT4.HD |
| Compatibility | Fits 1996-up HD models including FLHT, FLHX, FLTR, and some TRIKEs |
| Fuse Protection | Fuse Holder In-Line Waterproof, 120A Mini-ANL Fuse pre-installed on the Fuse Holder |
| Power Wiring | Wire Length (6ft) 4AWG Red + (6ft) 4AWG Black OFC tinned Wire |
| Additional Protection | Protective braided sleeve and heat shrink |
| Amplifier Compatibility | Suitable for Amplifier(s) up to 1680W Power |
| Nickel Plated | Ensures optimal conductivity and corrosion resistance |
| Remote Wiring | Wire Length (2ft) 18AWG Blue OFC tinned Remote Wiring |
SHIPPING INFO
| Dimensions L x W x H (Inches) | 12.75 x 5.5 x 2.25 |
| Weight | 2.5 |
| M/C Dimensions L x W x H (Inches) | 13.5 x 12 x 12 |
| M/C Weight | 29.5 |
| M/C Pcs | 10 |
1x DS18 MTLOC4 4-Ch High-to-Low Level Line Output Converter w/ Remote Turn-On (MTLOC4)
The MTLOC4 converts four factory speaker outputs into four RCA outputs, expanding your upgrade options. It offers selectable input impedance (20, 60, or 20k ohms) to prevent factory system errors.
Effortless Amplifier Activation
Auto turn-on via audio detection, DC offset, or remote trigger allows plug-and-play convenience and reduces installation complexity.
Built Tough and Compact
Constructed with an anodized aluminum shell and surface mount components, the MTLOC4 resists interference and runs cool. Its small footprint fits most vehicle setups.
Crystal-Clear Sound
Delivering less than 0.01% THD from 10Hz to 20kHz, this converter keeps your audio sharp and clean.
Unlock the full potential of your factory system with the MTLOC4!
Key Features
4-Channel High-to-Low Conversion
Selectable Input Impedance (20 / 60 / 20k Ohms)
Auto Turn-On (Audio / DC / Remote)
Anodized Aluminum Shell & Noise Rejection
10Hz–20kHz Frequency Range (<0.01% THD)
Specifications
Maximum Speaker Level Input: Up to 40V (400 watts RMS)
Maximum Preamp Output: Up to 11V
Nominal Conversion Ratio: 4:1
Frequency Response: 10Hz - 20kHz
Total Harmonic Distortion: 0.01%
Signal To Noise Ratio: >110dB
Input Impedance: Selectable 20 / 60 / 20k ohms
Output Impedance: 100 ohms
Power Draw: 130mA
Recommended Fuse Rating: 1A
Features
Bass Boost: No
Auto Turn-On: Yes (Audio Sens / REM / DC)
Remote Output: Yes
Level Matching Controls: Yes
Dash Remote Level Control: No
Led Indicators: Power / Clip
Housing Material / Color: Aluminum / Black
Wiring Connector: 14ga Quick Connector
Ground Isolation: Selectable (200 ohms / Isolated / Grounded)
Step-Down Method: Transformer
Input Selector: Selectable (2ch / 4ch)
Measurement
Overall Length: 5.7" / 145mm
Overall Width: 3.5" / 88mm
Overall Height: 1.1" / 28mm
2x DS18 PRO-CF6.4NR 6.5" | 250 Watts RMS | 4Ω | Mid-Bass | Neodymium (PRO-CF6.4NR)
DS18 • PRO-CF6.4NR
DS18 PRO-CF6.4NR 6.5" | 250 Watts RMS | 4Ω | Mid-Bass | Neodymium
DS18 PRO-CF6.4NR 6.5" Mid-Bass Loudspeaker with Water Resistant Carbon Fiber Cone And Neodymium Rings Magnet 500 Watts 4-Ohm
Nominal Diameter: 6.5" / 165mm
Nominal Impedance: 4 OHMS
RMS Power Handing: 250 WATTS
Maximum Power Handing: 500 WATTS
Frequency Response: 80Hz - 12KHz
Sensitivity (1w/1m): 95dB
Overview
Product Overview
DS18 PRO-CF6.4NR 6.5" Mid-Bass Loudspeaker with Water Resistant Carbon Fiber Cone And Neodymium Rings Magnet 500 Watts 4-Ohm
Neodymium is known for being the best option for magnets in your speaker motors which give the loudest and most efficient speaker.
Highlights
Key Product Features
- 6.5" Mid-Bass
- Water Resistant Carbon Fiber Cone
- RMS Power: 250 Watts(500 Watts Peak)
- Impedance: 4 Ohm
- Neodymium Magnet
SPECS
| SKU | PRO-CF6.4NR |
| Nominal Diameter | 6.5" / 165mm |
| Nominal Impedance | 4 OHMS |
| RMS Power Handing | 250 WATTS |
| Maximum Power Handing | 500 WATTS |
| Sensitivity (1w/1m) | 95dB |
| Frequency Response | 80Hz - 12KHz |
| Recommended Hi Pass Crossover | 100Hz |
SPECS
| Voice Coil Diameter | 2" / 50 mm |
| Voice Coil Former Material | Kapton |
| Winding Material | CCAW |
| Basket Material | Steel |
| Magnet Weight | 10Oz / 0.28Kg |
THIELE & SMALL PARAMETERS
| Vas | 8.36L / 0.295 ft3 |
| Xmax | 2.5 mm |
| Fs | 99 Hz |
| Qms | 9.848 |
| Qes | 0.393 |
| Qts | 0.378 |
| Re | 3.33 OHM |
MEASUREMENTS
| Overall Diameter | 6.61" / 168 mm |
| Front Mount Baffle Cutout | 5.75" / 146 mm |
| Mounting Depth | 2.73" / 69.5 mm |
| Overall Depth | 2.91" / 74 mm |
| Product Weight | 4 lbs |
| Product Dimensions | 8.25 x 8.25 x 4 |
| M/C Weight | 32 lbs |
| M/C Dimensions | 17 x 17 x 9 |
| M/C QTY | 8 |
| Sold In | Piece |
2x DS18 PRO-CF69.4NR 6x9" | 300 Watts RMS | 4Ω | Mid-Bass | Neodymium (PRO-CF69.4NR)
DS18 • PRO-CF69.4NR
DS18 PRO-CF69.4NR 6x9" | 300 Watts RMS | 4Ω | Mid-Bass | Neodymium
DS18 PRO-CF69.4NR 6x9" Mid-Bass Loudspeaker with Water Resistant Carbon Fiber Cone And Neodymium Rings Magnet 600 Watts 4-Ohm
Nominal Diameter: 6x9" / 152 x 228mm
Nominal Impedance: 4 OHMS
RMS Power Handling: 300 WATTS
Maximum Power Handling: 600 WATTS
Frequency Response: 63Hz - 12KHz
Sensitivity (1w/1m): 95 dB
Overview
Product Overview
DS18 PRO-CF69.4NR 6x9" Mid-Bass Loudspeaker with Water Resistant Carbon Fiber Cone And Neodymium Rings Magnet 600 Watts 4-Ohm
Neodymium is known for being the best option for magnets in your speaker motors which give the loudest and most efficient speaker.
Highlights
Key Product Features
- 6X9" Mid-Bass
- Water Resistant Carbon Fiber Cone
- RMS Power: 300 Watts(600 Watts Peak)
- Impedance: 4 Ohm
- Neodymium Magnet
SPECS
| SKU | PRO-CF69.4NR |
| Nominal Diameter | 6x9" / 152 x 228mm |
| Nominal Impedance | 4 OHMS |
| RMS Power Handling | 300 WATTS |
| Maximum Power Handling | 600 WATTS |
| Sensitivity (1w/1m) | 95 dB |
| Frequency Response | 63Hz - 12KHz |
| Recommended Hi Pass Crossover | 80 Hz |
SPECS
| Voice Coil Diameter | 2" / 50 mm |
| Voice Coil Former Material | Kapton |
| Winding Material | CCAW |
| Basket Material | Steel |
| Magnet Weight | 10.5Oz / 0.3Kg |
THIELE & SMALL PARAMETERS
| Vas | 12.75L / 0.45 ft3 |
| Xmax | 2.5 mm |
| Fs | 83 Hz |
| Qms | 12.16 |
| Qes | 0.69 |
| Qts | 0.65 |
| Re | 3.4 OHM |
MEASUREMENTS
| Overall Diameter | 6.48" x 9.29" / 164.5 x 236 mm |
| Front Mount Baffle Cutout | 5.94" x 8.58" / 151 x 218 mm |
| Mounting Depth | 3.25" / 82.5 mm |
| Overall Depth | 3.44" / 87.5 mm |
| Product Weight | 4.5 lbs |
| Product Dimensions | 10.75 x 8 x 4.5 |
| M/C Weight | 18.5 lbs |
| M/C Dimensions | 16.5 x 11.25 x 10.5 |
| M/C QTY | 4 |
| Sold In | Piece |
2x DS18 PRO-TWX1/BK 3.8" | Super Bullet | 120 Watts RMS | 1" Aluminum Vc | 4Ω | Black (PRO-TWX1/BK)
DS18 • PRO-TWX1/BK
DS18 PRO-TWX1/BK 3.8" | Super Bullet | 120 Watts RMS | 1" Aluminum Vc | 4Ω | Black
DS18 PRO-TWX1/BK – 1” PRO Aluminum Super Bullet Tweeter VC – 240 Watts with Capacitor Crossover (Pair)
Nominal Diameter: 3.8" / 96mm
Nominal Impedance: 4 Ohm
Peak Power Handling: 240W
Frequency Response: 3.5K-20Khz
Sensitivity (1w/1m): 103 db
Sold In Pair or Single: Pair
Overview
Product Overview
DS18 PRO-TWX1/BK – 1” PRO Aluminum Super Bullet Tweeter VC – 240 Watts with Capacitor Crossover (Pair)
The DS18 PRO-TWX1/BK are out-of-this-world tweeters and for good reason. With 240W peak power handling and a frequency response of 3.5KHz to 20KHz, these professional grade super tweeters deliver accurate sounds at high frequencies––perfect if you like your highs crisp, bright, and loud! Better yet, the Bullet dust cover protects the voice coil and ensures that your highs cut through the noise.
Highlights
Key Product Features
- 3.8" Super Bullet Tweeter
- MAX Power: 240 Watts
- RMS Power: 120 Watts
- Impedance: 4 Ohm ~ 103dB
- Ferrite Magnet
SPECS
| SKU | PRO-TWX1/BK |
| Nominal Diameter | 3.8" / 96mm |
| Nominal Impedance | 4 Ohm |
| AES Power Handling | 60W |
| Program Power Handling | 120W |
| Peak Power Handling | 240W |
| Sensitivity (1w/1m) | 103 db |
| Frequency Response | 3.5K-20Khz |
| Recommended Hi Pass Crossover | 2KHz |
| Sold In Pair or Single | Pair |
BODY / FEATURES
| Filter (Bass Blocker) | N/A |
| Body Material | Aluminum |
| Body Color / Finish | Black |
| Faceplate Color / Finish | Black / Machined |
| Bullet Material | Aluminum |
MOTOR
| Voice Coil Diameter | 1" 25.4mm |
| Voice Coil Former Material | Kapton |
| Winding Material | CCAW |
| Diaphragm Material | Aluminum |
| Magnet Material | Ferrite |
| Magnet Weight | 8 Oz |
MEASUREMENT
| Overall Diameter | 3.78" / 96mm |
| Overall Depth | 1.78" / 45mm |
| Front Mount Baffle Cutout | 2.76" / 70mm |
| Mounting Depth | 1.57" / 40mm |
| Motor Diameter | 2.76" / 70mm |
| Gross Single Unit Weight (lb) | 3 |
| Single Unit Box Dimensions W x L x H (Inches) | 8.5 x 4.25 x 2.25 |
| Quantity of Units in Master Carton | 12 |
| Gross Master Carton Weight (lb) | 33 |
| Master Carton Dimensions W x L x H (Inches) | 17.25 x 9.25 x 7.5 |