Included in this kit

---

This bundle includes a DS18 ZR500.1D 1-Channel Class D Monoblock | 500 Watts RMS @ 1Ω, a Kicker 48CWRT102 CompRT 10" Subwoofer, DVC, 2-ohm, a Cerwin Vega CAK42 4 Gauge OFC Amp Kit – 100% Oxygen-Free Copper Amplifier Wiring Kit with RCA Cable, Fuse Holder & Power Wire – Up to 1500W RMS, and a Kicker 46KISLOC2 K-Series Stereo Line-Output Converter w/ Remote Turn-On Output.

1x DS18 ZR500.1D 1-Channel Class D Monoblock | 500 Watts RMS @ 1Ω (ZR500.1D)

1x Kicker 48CWRT102 CompRT 10" Subwoofer, DVC, 2-ohm (48CWRT102)

Kicker 48CWRT102 CompRT 10" Subwoofer, Dual 2-ohm, 400w RMS

The Kicker CompRT was designed to give a new perspective on the capabilities of the shallow subwoofer. No longer do you get a thin sound with a thin subwoofer. These subwoofers were designed to be right at home in small enclosures under the seat of a truck, and also just as at home behind the seat of your UTV. The weatherproof design and new Forced-Air Cooling keep thing cool and tight when the trail gets rough. All CompRT subwoofers are less than 5 inches deep and provide full-size sound.

Key Features -
• High Mass, Solid Pole Piece for Superior Heat Dissipation
• Less than 5 Inches Deep
• Dual Voice Coils for Installation Flexibility
• Unique Heat Management for a Thin but Powerful Sub
• Stitched Surround for Unsurpassed Reliability
• New and Improved – True Subwoofer Performance from a Thin Driver
• Features Forced-Air Cooling - 20% Cooler for Increased Reliability
• Legendary KICKER Bass in a Thin Subwoofer

CWRT10 Specifications -
• Woofers [in, cm] - 10, 25
• Impedance [Ohms] - Dual 2
• Recommended Amp Power [watts RMS] - 400
• Peak Power Handling [watts] - 800
• Frequency Response [Hz] - 25-500
• Sensitivity [dB 1w/1m] - 84.8
• Mounting Depth [in, cm] - 3-7/16, 8.8
• Xmax [Linear Excursion] [mm] - 10.5

1x Cerwin Vega CAK42 4 Gauge OFC Amp Kit – 100% Oxygen-Free Copper Amplifier Wiring Kit with RCA Cable, Fuse Holder & Power Wire – Up to 1500W RMS (CAK42)

Designed Specifically for Car Audio System up to 1200W. 4 Gauge 2-Channel Amplifier Connection Kits. 17ft, 4 Gauge Matte Red Power Wire with ring terminated. 3ft, 4 Gauge Matte Black Ground Wire with ring terminated. 17ft, 18 Gauge Remote Turn-on wire. 20ft, 16 Gauge Speaker Wire. 17ft, 2-Ch. Vega series RCA interconnect. AGU fuse holder with 100A fuse. All Hardware included. OFC. US Spec.

Specifications
4 Gauge 2-Channel Amplifier Connection Kits
17ft. 4 Gauge Matte Red Power Wire with ring terminated
3ft. 4 Gauge Matte Black Ground Wire with ring terminated
17ft. 18 Gauge remote Turn-on wire
20ft. 16 Gauge Speaker Wire
17ft. 2-Ch. Vega series RCA interconnect
ANL fuse holder with 100A fuse
All Hardware Include
OFC

1x Kicker 46KISLOC2 K-Series Stereo Line-Output Converter w/ Remote Turn-On Output (46KISLOC2)

Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level, with all the sparkling highs and thunderous lows of your original audio.

Unlike traditional LOCs, the KISLOC2 is designed without inductors to deliver a completely flat frequency response at all volume levels.

Using nothing more than your factory speaker wires, the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp, 12-volt remote wire using DC offset. Powerful enough to turn on multiple amplifiers, the 12-volt remote wire delivers plenty of power without hunting for a switched 12-volt power source.

• Accepts up to 55 watts (16 volts) of input signal
• Fully compatible with standard radios and most smart radios*
• Delivers up to an 8-volt output signal
• Flat 20Hz-20kHz frequency range at all volume levels
• Includes a powerful 100 milli-amp, remote turn-on wire. No 12V power source needed!
• LED indicator for DC offset turn-on
*Amplifier output of smart radio must have 60Ω impedance or lower. See dealer for details.