Description
Included in this kit
This bundle includes a DS18 ION1600.4D 4-Channel | 2 x 800 @ 4Ω Bridge | 4 x 400 @ 2Ω | 4 x 240 @ 4Ω Watts RMS, 4x DS18 6XL650NB-4 6.5" | 325 Watts RMS | 4Ω | Mid-Range | Neodymium | Aluminum Bullet, 2x Cerwin-Vega XED1T - XED .75" Piezo Tweeter Add-On Kit - 500W Max, a Cerwin Vega CAK42 4 Gauge OFC Amp Kit – 100% Oxygen-Free Copper Amplifier Wiring Kit with RCA Cable, Fuse Holder & Power Wire – Up to 1500W RMS, and a Kicker 46KISLOC2 K-Series Stereo Line-Output Converter w/ Remote Turn-On Output.
1x DS18 ION1600.4D 4-Channel | 2 x 800 @ 4Ω Bridge | 4 x 400 @ 2Ω | 4 x 240 @ 4Ω Watts RMS (ION1600.4D)
DS18 • ION1600.4D
DS18 ION1600.4D 4-Channel | 2 x 800 @ 4Ω Bridge | 4 x 400 @ 2Ω | 4 x 240 @ 4Ω Watts RMS
DS18 ION Compact Full-Range Class D 4-Channel Amplifier 4 x 240 Watts RMS @ 4-ohm
Minimum Impedance: 2 Ohm (St) / 4 Ohms (Bridge)
RMS Power @ 4 ohm: 4 x 240W
Total Watts (Peak): 4800W
Frequency Response: 10Hz-20KHz
Amplifier Class: Digital
RMS Power @ 2 ohm: 4 x 400W
Overview
Product Overview
DS18 ION Compact Full-Range Class D 4-Channel Amplifier 4 x 240 Watts RMS @ 4-ohm
ION1600.4D, the perfect digital micro amplifier addition to your car audio system for boosting performance ensuring a premium listening experience!
Highlights
Key Product Features
- 4 Channel Full Range
- Class D
- 2 - 4 Ohm Stable
- 4 X 240 Watts @ 4 Ohm
- Power / Clip / Protection Indicator
SPECS
| SKU | ION1600.4D |
| Total Watts (Peak) | 4800W |
| RMS Power @ 4 ohm | 4 x 240W |
| RMS Power @ 2 ohm | 4 x 400W |
| RMS Power @ 1 ohm | N/A |
| RMS Power @ 4 ohm Bridge | 2 x 800W |
AUDIO
| Frequency Response | 10Hz-20KHz |
| Signal to Noise Ratio | >95dB |
| Efficiency @ 4 ohm | 88% |
| Damping Factor | 210 |
| Input Impedance | 27Kohms |
| Channel Separation | 59dB |
| Total Harmonic Distortion (THD) | 0.01% |
| Low Level Input Range | 0.2-6V |
| High Level Input | Yes |
| Selectable X-Over | LPF/HPF/FULL |
| X-Over Filter Range | 40Hz-2KHz |
| Bass Boost Range | NO |
| Bass Boost Frequency | 45Hz |
FEATURES
| Amplifier Class | Digital |
| Amplifier Type | Full-Range Stereo |
| Number of Channels | 4 |
| Minimum Impedance | 2 Ohm (St) / 4 Ohms (Bridge) |
| Led Indicator | Power / Protect / Clipping |
| Power Input Terminal Size | 4 AWG |
| Fuse Size | 140A (external) |
| Remote Level Control | No |
| Cooling Fan | Yes |
| Thermal Protection | Yes |
| Over-Load Protection | Yes |
| DC Output Protection | Yes |
| Short Circuit Output Protection | Yes |
| Voltage Input Protection | Yes |
| Clipping Protection | Yes |
| Body Color / Finish | Aluminum Black / Silver |
EXTRA FEATURES
| Hi-Level Speaker connector | Yes |
| Tiffany RCA Terminal | Yes |
| LED Clip Indicator | Yes |
| High Efficiency Micro Digital Design | Yes |
MEASUREMENT
| Overall Length | 7.32" / 186mm |
| Overall Wide | 4.72" / 120mm |
| Overall Height | 2" / 52mm |
| Heatsink Length | 6" / 153mm |
| Gross Single Unit Weight | 1.3Kg |
4x DS18 6XL650NB-4 6.5" | 325 Watts RMS | 4Ω | Mid-Range | Neodymium | Aluminum Bullet (6XL650NB-4)
DS18 • 6XL650NB-4 • High-output mid-range
DS18 6XL650NB-4 6.5" | 325 Watts RMS | 4Ω | Mid-Range | Neodymium | Aluminum Bullet
A compact 6.5-inch pro-audio driver built to project clear, forceful mid-range output without the weight of a conventional ferrite motor.
Nominal Diameter: 6.5" / 165mm
Nominal Impedance: 4 Ohm
RMS Power Handling: 325 watts
Frequency Response: 80Hz-12.5KHz
Sensitivity (1w/1m): 97dB
MAX Power Handling: 650 watts
Overview
Built for the application
The 6XL650NB-4 pairs 325 watts RMS of power handling with 97dB sensitivity, giving custom systems the efficiency and headroom needed for loud, articulate vocals and instruments.
Its 4-ohm configuration, 80Hz-12.5kHz response, and recommended 100Hz high-pass make it a focused mid-range solution for multi-way systems.
At a glance
Why it belongs in the system
- High-output 6.5-inch mid-range driver for pro-audio systems
- 325W RMS handling supports sustained high-volume playback
- Neodymium ring motor delivers strong output without a bulky ferrite assembly
- Black aluminum bullet improves heat dissipation and upper-frequency output
- 97dB sensitivity and 80Hz-12.5kHz response; single 4-ohm speaker
Design and setup
Lightweight motor, serious output
Neodymium rings energize a 2-inch Kapton-former CCAW voice coil, while the aluminum basket keeps the assembly rigid. A non-pressed paper cone and cloth surround preserve the responsive character expected from a pro-audio mid-range.
Aluminum bullet
The black aluminum bullet helps move heat away from the motor and supports output at the upper end of the driver's range.
Installation-ready
A 5.9-inch cutout and 2.83-inch mounting depth make planning a door, pod, or enclosure installation straightforward.
System matching
The single 4-ohm driver is rated at 325W RMS and should be protected with a 100Hz high-pass filter.
SPECS
| SKU | 6XL650NB-4 |
| Nominal Diameter | 6.5" / 165mm |
| Nominal Impedance | 4 Ohm |
| RMS Power Handling | 325 watts |
| MAX Power Handling | 650 watts |
| Sensitivity (1w/1m) | 97dB |
| Frequency Response | 80Hz-12.5KHz |
| Recommended HI Pass Crossover | 100Hz |
| Sold in Pair or Single | Single |
| Grill Included | No |
MOTOR
| Voice Coil Diameter | 2" / 50.8mm |
| Voice Coil Former Material | Kapton |
| Winding Material | CCAW |
| Cone Material | Non-pressed Paper |
| Dust Cap Material | N/A |
| Bullet Material | Aluminum |
| Bullet Color/Finish | Black |
| Surround Material | Cloth |
| Basket Material | Aluminum |
| Basket Color/Finish | Satin Black |
| Magnet Material | Neodymium Rings |
| Magnet Weight | 11.4 Oz |
| Displacement Volume | 0.34L / 0.012ft3 |
THIELE & SMALL PARAMETERS
| Equivalent Volume | 5.07L / 0.17ft3 |
| Excursion (one way) | 3.7mm |
| Free Air Resonance | 120Hz |
| Mechanical Factor | 5.16 |
| Electrical Factor | 0.28 |
| Total Factor | 0.26 |
| Mechanical Mass | 9.11g |
| Mechanical Compliance | 0.19mm/N |
| BL Factor | 9.41 |
| Voice Coil Inductance | 0.05mH |
| Cone Area | 136.85cm2 |
| DC Resistance | 3.5 ohm |
| Mechanical Mass w/o air | 8.2g |
MEASUREMENT
| Overall Diameter | 6.7" / 170mm |
| Overall Depth | 3.19" / 81mm |
| Front Mount Baffle Cutout | 5.9" / 150mm |
| Mounting Depth | 2.83" / 72mm |
| Motor Diameter | 4.13" / 105mm |
2x Cerwin-Vega XED1T - XED .75" Piezo Tweeter Add-On Kit - 500W Max (XED1T)
Defy all odds and overcome budget limitations with the best in class XED SERIES SPEAKERS that provide quality sound reproduction without breaking the bank. Harnessed with suitable power handling capability and balanced metal dome tweeters, XED SERIES SPEAKERS provides tremendous value and sound that will be music to your ears.
Specifications
SPEAKER SIZE - 1”
SPEAKER TYPE - TWEETER
OHMS (PER COIL) - 4
NUMBER OF VOICE COILS - SINGLE
CONE MATERIAL - PIEZO
DIAPHRAGM MATERIAL - PIEZO
BASKET MATERIAL - COMPOSITE PLASTIC
MAGNET TYPE - NEODYMIUM
INCLUDES SPEAKER GRILL - YES
SURROUND MATERIAL - TREATED CLOTH
YES - EXTERNAL
FREQUENCY RESPONSE (HZ): 3KHZ-20KHZ
VOICE COIL DIAMETER - INCH (MM) - .75"
SENSITIVITY: 97DB
POWER HANDLING RMS: 20W
POWER HANDLING MAX: 500W
1x Cerwin Vega CAK42 4 Gauge OFC Amp Kit – 100% Oxygen-Free Copper Amplifier Wiring Kit with RCA Cable, Fuse Holder & Power Wire – Up to 1500W RMS (CAK42)
Designed Specifically for Car Audio System up to 1200W. 4 Gauge 2-Channel Amplifier Connection Kits. 17ft, 4 Gauge Matte Red Power Wire with ring terminated. 3ft, 4 Gauge Matte Black Ground Wire with ring terminated. 17ft, 18 Gauge Remote Turn-on wire. 20ft, 16 Gauge Speaker Wire. 17ft, 2-Ch. Vega series RCA interconnect. AGU fuse holder with 100A fuse. All Hardware included. OFC. US Spec.
Specifications
4 Gauge 2-Channel Amplifier Connection Kits
17ft. 4 Gauge Matte Red Power Wire with ring terminated
3ft. 4 Gauge Matte Black Ground Wire with ring terminated
17ft. 18 Gauge remote Turn-on wire
20ft. 16 Gauge Speaker Wire
17ft. 2-Ch. Vega series RCA interconnect
ANL fuse holder with 100A fuse
All Hardware Include
OFC
1x Kicker 46KISLOC2 K-Series Stereo Line-Output Converter w/ Remote Turn-On Output (46KISLOC2)
Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level, with all the sparkling highs and thunderous lows of your original audio.
Unlike traditional LOCs, the KISLOC2 is designed without inductors to deliver a completely flat frequency response at all volume levels.
Using nothing more than your factory speaker wires, the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp, 12-volt remote wire using DC offset. Powerful enough to turn on multiple amplifiers, the 12-volt remote wire delivers plenty of power without hunting for a switched 12-volt power source.
• Accepts up to 55 watts (16 volts) of input signal
• Fully compatible with standard radios and most smart radios*
• Delivers up to an 8-volt output signal
• Flat 20Hz-20kHz frequency range at all volume levels
• Includes a powerful 100 milli-amp, remote turn-on wire. No 12V power source needed!
• LED indicator for DC offset turn-on
*Amplifier output of smart radio must have 60Ω impedance or lower. See dealer for details.