Description
Included in this kit
This bundle includes a DS18 ION1600.4D 4-Channel | 2 x 800 @ 4Ω Bridge | 4 x 400 @ 2Ω | 4 x 240 @ 4Ω Watts RMS, 4x DS18 PRO-NS8.4 8" | 200 Watts RMS | 4Ω | Shallow Neodymium Mid-Range, 2x Cerwin-Vega XED1T - XED .75" Piezo Tweeter Add-On Kit - 500W Max, a Cerwin Vega CAK42 4 Gauge OFC Amp Kit – 100% Oxygen-Free Copper Amplifier Wiring Kit with RCA Cable, Fuse Holder & Power Wire – Up to 1500W RMS, and a Kicker 46KISLOC2 K-Series Stereo Line-Output Converter w/ Remote Turn-On Output.
1x DS18 ION1600.4D 4-Channel | 2 x 800 @ 4Ω Bridge | 4 x 400 @ 2Ω | 4 x 240 @ 4Ω Watts RMS (ION1600.4D)
DS18 • ION1600.4D
DS18 ION1600.4D 4-Channel | 2 x 800 @ 4Ω Bridge | 4 x 400 @ 2Ω | 4 x 240 @ 4Ω Watts RMS
DS18 ION Compact Full-Range Class D 4-Channel Amplifier 4 x 240 Watts RMS @ 4-ohm
Minimum Impedance: 2 Ohm (St) / 4 Ohms (Bridge)
RMS Power @ 4 ohm: 4 x 240W
Total Watts (Peak): 4800W
Frequency Response: 10Hz-20KHz
Amplifier Class: Digital
RMS Power @ 2 ohm: 4 x 400W
Overview
Product Overview
DS18 ION Compact Full-Range Class D 4-Channel Amplifier 4 x 240 Watts RMS @ 4-ohm
ION1600.4D, the perfect digital micro amplifier addition to your car audio system for boosting performance ensuring a premium listening experience!
Highlights
Key Product Features
- 4 Channel Full Range
- Class D
- 2 - 4 Ohm Stable
- 4 X 240 Watts @ 4 Ohm
- Power / Clip / Protection Indicator
SPECS
| SKU | ION1600.4D |
| Total Watts (Peak) | 4800W |
| RMS Power @ 4 ohm | 4 x 240W |
| RMS Power @ 2 ohm | 4 x 400W |
| RMS Power @ 1 ohm | N/A |
| RMS Power @ 4 ohm Bridge | 2 x 800W |
AUDIO
| Frequency Response | 10Hz-20KHz |
| Signal to Noise Ratio | >95dB |
| Efficiency @ 4 ohm | 88% |
| Damping Factor | 210 |
| Input Impedance | 27Kohms |
| Channel Separation | 59dB |
| Total Harmonic Distortion (THD) | 0.01% |
| Low Level Input Range | 0.2-6V |
| High Level Input | Yes |
| Selectable X-Over | LPF/HPF/FULL |
| X-Over Filter Range | 40Hz-2KHz |
| Bass Boost Range | NO |
| Bass Boost Frequency | 45Hz |
FEATURES
| Amplifier Class | Digital |
| Amplifier Type | Full-Range Stereo |
| Number of Channels | 4 |
| Minimum Impedance | 2 Ohm (St) / 4 Ohms (Bridge) |
| Led Indicator | Power / Protect / Clipping |
| Power Input Terminal Size | 4 AWG |
| Fuse Size | 140A (external) |
| Remote Level Control | No |
| Cooling Fan | Yes |
| Thermal Protection | Yes |
| Over-Load Protection | Yes |
| DC Output Protection | Yes |
| Short Circuit Output Protection | Yes |
| Voltage Input Protection | Yes |
| Clipping Protection | Yes |
| Body Color / Finish | Aluminum Black / Silver |
EXTRA FEATURES
| Hi-Level Speaker connector | Yes |
| Tiffany RCA Terminal | Yes |
| LED Clip Indicator | Yes |
| High Efficiency Micro Digital Design | Yes |
MEASUREMENT
| Overall Length | 7.32" / 186mm |
| Overall Wide | 4.72" / 120mm |
| Overall Height | 2" / 52mm |
| Heatsink Length | 6" / 153mm |
| Gross Single Unit Weight | 1.3Kg |
4x DS18 PRO-NS8.4 8" | 200 Watts RMS | 4Ω | Shallow Neodymium Mid-Range (PRO-NS8.4)
DS18 • PRO-NS8.4 • Shallow-mount mid-range
DS18 PRO-NS8.4 8" | 200 Watts RMS | 4Ω | Shallow Neodymium Mid-Range
An 8-inch neodymium mid-range designed to bring pro-audio output to installations where mounting depth is at a premium.
Nominal Diameter: 8" / 208mm
Nominal Impedance: 4 Ohms
RMS Power Handing: 200W
Maximum Power Handing: 400W
Frequency Response: 97Hz-12KHz
Sensitivity (1w/1m): 96 dB
Overview
Built for the application
The PRO-NS8.4 delivers 200 watts RMS with 96dB sensitivity, making it an efficient choice for loud, forward mid-range reproduction in compact custom builds.
Its 2.48-inch mounting depth reduces the space required behind the baffle, while the 97Hz-12kHz response supports broad vocal and instrumental coverage.
At a glance
Why it belongs in the system
- Shallow 8-inch neodymium mid-range driver for space-limited installs
- 200W RMS / 400W max power handling at 4 ohms
- 2.48-inch mounting depth fits applications that cannot accept a full-size driver
- 2-inch copper voice coil and neodymium motor support efficient high-output playback
- 96dB sensitivity with 97Hz-12kHz response; sold individually
Design and setup
Purpose-built for tight spaces
The shallow steel basket surrounds a neodymium motor and 2-inch copper voice coil, combining installation flexibility with the control needed for high-output playback.
Shallow profile
Only 2.48 inches of mounting depth helps solve clearance problems in doors, pods, and compact enclosures.
Efficient output
A 96dB sensitivity rating makes effective use of available amplifier power.
Protected bandwidth
Use the recommended 160Hz high-pass filter to keep the 4-ohm driver focused on its intended mid-range duty.
SPECS
| SKU | PRO-NS8.4 |
| Nominal Diameter | 8" / 208mm |
| Nominal Impedance | 4 Ohms |
| RMS Power Handing | 200W |
| Maximum Power Handing | 400W |
| Sensitivity (1w/1m) | 96 dB |
| Frequency Response | 97Hz-12KHz |
| Recommended Hi Pass Crossover | 160Hz |
SPECS
| Voice Coil Diameter | 2" / 50.8 mm |
| Voice Coil Former Material | KSV |
| Winding Material | Copper |
| Basket Material | Steel |
| Magnet Weight | 3.32 Oz |
THIELE & SMALL PARAMETERS
| Vas | 4.8L / 0.17ft3 |
| Xmax | 2 mm |
| Fs | 117Hz |
| Qms | 4.643 |
| Qes | 1.147 |
| Qts | 0.92 |
| Re | 3.2 ohm |
MEASUREMENTS
| Overall Diameter | 8.2" / 208mm |
| Front Mount Baffle Cutout | 7.12" / 181mm |
| Mounting Depth | 2.48" / 63mm |
| Overall Depth | 2.67" / 68mm |
| Product Weight | 2.5 lbs |
| Product Dimensions | 8.75 x 8.75 x 3.25 |
| M/C Weight | 22.5 lbs |
| M/C Dimensions | 18.25 x 18.25 x 7.5 |
| M/C QTY | 8 |
| Sold In | Piece |
2x Cerwin-Vega XED1T - XED .75" Piezo Tweeter Add-On Kit - 500W Max (XED1T)
Defy all odds and overcome budget limitations with the best in class XED SERIES SPEAKERS that provide quality sound reproduction without breaking the bank. Harnessed with suitable power handling capability and balanced metal dome tweeters, XED SERIES SPEAKERS provides tremendous value and sound that will be music to your ears.
Specifications
SPEAKER SIZE - 1”
SPEAKER TYPE - TWEETER
OHMS (PER COIL) - 4
NUMBER OF VOICE COILS - SINGLE
CONE MATERIAL - PIEZO
DIAPHRAGM MATERIAL - PIEZO
BASKET MATERIAL - COMPOSITE PLASTIC
MAGNET TYPE - NEODYMIUM
INCLUDES SPEAKER GRILL - YES
SURROUND MATERIAL - TREATED CLOTH
YES - EXTERNAL
FREQUENCY RESPONSE (HZ): 3KHZ-20KHZ
VOICE COIL DIAMETER - INCH (MM) - .75"
SENSITIVITY: 97DB
POWER HANDLING RMS: 20W
POWER HANDLING MAX: 500W
1x Cerwin Vega CAK42 4 Gauge OFC Amp Kit – 100% Oxygen-Free Copper Amplifier Wiring Kit with RCA Cable, Fuse Holder & Power Wire – Up to 1500W RMS (CAK42)
Designed Specifically for Car Audio System up to 1200W. 4 Gauge 2-Channel Amplifier Connection Kits. 17ft, 4 Gauge Matte Red Power Wire with ring terminated. 3ft, 4 Gauge Matte Black Ground Wire with ring terminated. 17ft, 18 Gauge Remote Turn-on wire. 20ft, 16 Gauge Speaker Wire. 17ft, 2-Ch. Vega series RCA interconnect. AGU fuse holder with 100A fuse. All Hardware included. OFC. US Spec.
Specifications
4 Gauge 2-Channel Amplifier Connection Kits
17ft. 4 Gauge Matte Red Power Wire with ring terminated
3ft. 4 Gauge Matte Black Ground Wire with ring terminated
17ft. 18 Gauge remote Turn-on wire
20ft. 16 Gauge Speaker Wire
17ft. 2-Ch. Vega series RCA interconnect
ANL fuse holder with 100A fuse
All Hardware Include
OFC
1x Kicker 46KISLOC2 K-Series Stereo Line-Output Converter w/ Remote Turn-On Output (46KISLOC2)
Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level, with all the sparkling highs and thunderous lows of your original audio.
Unlike traditional LOCs, the KISLOC2 is designed without inductors to deliver a completely flat frequency response at all volume levels.
Using nothing more than your factory speaker wires, the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp, 12-volt remote wire using DC offset. Powerful enough to turn on multiple amplifiers, the 12-volt remote wire delivers plenty of power without hunting for a switched 12-volt power source.
• Accepts up to 55 watts (16 volts) of input signal
• Fully compatible with standard radios and most smart radios*
• Delivers up to an 8-volt output signal
• Flat 20Hz-20kHz frequency range at all volume levels
• Includes a powerful 100 milli-amp, remote turn-on wire. No 12V power source needed!
• LED indicator for DC offset turn-on
*Amplifier output of smart radio must have 60Ω impedance or lower. See dealer for details.