Description
Included in this kit
This bundle includes 2x DS18 ZXI8.4D ZXI 8-Inch High-Excursion Subwoofer, 600W RMS, Dual 4 Ohms, and an ATG Audio Transcend Series 1000w Class-D Mono Subwoofer Amplifier - ATG-TS1000.1D.
2x DS18 ZXI8.4D ZXI 8-Inch High-Excursion Subwoofer, 600W RMS, Dual 4 Ohms (ZXI8.4D)
DS18 ZXI8.4D
DS18 ZXI8.4D ZXI 8-Inch High-Excursion Subwoofer, 600W RMS, Dual 4 Ohms
The ZXI8.4D combines an 8-inch high-excursion design with dual 4-ohm voice coils and 600W RMS power handling. Four stacked ferrite magnets, a foam surround and an aluminum basket support a subwoofer intended for sealed or ported enclosures.
Key features
- 600W RMS and 1200W maximum power handling support a high-output 8-inch bass system.
- Dual 4-ohm voice coils give you flexibility when configuring the amplifier load.
- Quad-stacked ferrite magnets provide a 104-ounce motor assembly.
- Non-pressed paper cone, foam surround and aluminum basket form the ZXI driver structure.
- Works in sealed or ported boxes; the published mounting depth is 5.51 inches.
Installation and integration
Plan the enclosure and amplifier wiring for the dual 4-ohm coil configuration. Check the 7.31-inch cutout and 5.51-inch mounting depth before building the baffle.
Technical specifications
| Model | ZXI8.4D |
| Nominal diameter | 8 in |
| Voice coils | Dual 4 ohms |
| RMS / maximum handling | 600 W / 1200 W |
| Frequency response | 25-880 Hz |
| Sensitivity | 86 dB (1 W / 1 m) |
| Voice coil diameter | 2 in |
| Cone / surround | Non-pressed paper / foam |
| Basket | Aluminum; black sandblasted |
| Magnet | Ferrite; 104 oz (4 x 26 oz) |
| Mounting depth | 5.51 in |
| Cutout | 7.31 in |
| Overall diameter / depth | 8.58 / 6.83 in |
1x ATG Audio Transcend Series 1000w Class-D Mono Subwoofer Amplifier - ATG-TS1000.1D (ATG-TS1000.1D)
This powerful amplifier delivers clear, crisp sound even in the harshest marine environments. With its powerful 1000W peak power and 2Ω mono load capability, this amplifier can easily drive even the most demanding subwoofers. The Class D circuitry ensures that the amplifier delivers clean, accurate sound, while the marine grade components help to keep the amplifier cool even under heavy loads. The Transcend Series 1000w Class D Monoblock Amplifier also features a variety of features that make it easy to use and customize, including a variable low pass crossover, bass boost, and sub-sonic filter.
Features -
• Powerful 1000W peak power
• 2Ω mono load capability
• Class D circuitry
• Marine grade components
• Variable low pass crossover
• Bass boost
• Sub-sonic filter
Specifications -
• Weight: 4.510000
• Length: 9.45
• Height: 1.96"
• Width: 10.11"
• Depth: 7.16"
• Circuitry: Class D
• Number of Channels: 1
• Stereo/Mono Mono
• Total Power (Sum of Rated Power): 1000 Watts
• Dimensions (H x W x D): 9.45x15.35x3.74
• Frequency Response: 20Hz ~ 250Hz
• Remote Controls Included
• Channel Watts: 1 x 1000 Watts @ 1Ω, 1 x 500 Watts @ 2Ω, 1 x 250 Watts @ 4Ω
• Damping Factor: (1KHz @ 4-Ohms) 100<
• Low-Pass filter range: (12 dB Slope): 50Hz ~ 220Hz
• Variable Subsonic Filter: (12 dB Slope): 10Hz ~ 50Hz
• Bass Boost @ 45Hz: 0-6dB-12dB
• Working Voltage: 12 ~ 15 volts
• Signal to Noise Ratio: 95
• Bass Remote: Included
• Series: Transcend