null
Sale
New!

DS18 ZXI10.4D 10in Sub and NEO1000.1DSP Amp Bundle

Shop All: DS18

No reviews yet Write a Review
SKU:
DS18BDL261105-09
Condition:
New
$889.95
$759.95
$889.95
$759.95

Description

Included in this kit


This bundle includes a DS18 ZXI10.4D 10" | 800 Watts RMS | 4Ω | DVC, and a Diamond Audio NEO1000.1DSP Full DSP 1000W RMS @1Ω CLASS D Monoblock Amplifier With 2CH Outputs.

1x DS18 ZXI10.4D 10" | 800 Watts RMS | 4Ω | DVC (ZXI10.4D)


DS18 • ZXI10.4D

DS18 ZXI10.4D 10" | 800 Watts RMS | 4Ω | DVC

DS18 ZXI10.4D 10” High Excursion Car Subwoofer – 1600 Watts 4-Ohm DVC, Quad Stacked Magnets

Nominal Diameter: 10" / 254mm Nominal Impedance: 4 + 4 ohms RMS Power Handling: 800W Maximum Power Handling: 1600W Frequency Response: 20-900Hz Sensitivity (1w/1m): 86dB

Overview

Product Overview

DS18 ZXI10.4D 10” High Excursion Car Subwoofer – 1600 Watts 4-Ohm DVC, Quad Stacked Magnets

Designed to provide thumping power that shakes everyone’s mirrors, the ZXI10.4D is a newly designed subwoofer that could only be defined as a monster of a machine. It packs a 2.5-inch voice coil that’s made to withstand high amounts of power with unparalleled efficiency, while producing thunderous bass that’s free from distortion. Don’t get it twisted, this sub is versatile enough to play higher frequencies under 900Hz down to 20Hz wi th incredible clarity and accuracy!

Highlights

Key Product Features

  • 10" High Excursion Subwoofer
  • MAX Power: 1600 Watts
  • RMS Power: 800 Watts
  • Impedance: 4-Ohm 2.5" DVC
  • Quad Stacked Ferrite Magnet
SPECS
SKU ZXI10.4D
Nominal Diameter 10" / 254mm
Nominal Impedance 4 + 4 ohms
RMS Power Handling 800W
Maximum Power Handling 1600W
Sensitivity (1w/1m) 86dB
Frequency Response 20-900Hz
Recommended Lo Pass Crossover 90Hz
MOTOR
Voice Coil Diameter 2.5" / 63.5mm
Voice Coil Former Material Black Aluminum
Winding Material CCAW
Cone Material Non-Pressed Paper
Dust Cap Material PPI
Surround Material Foam
Basket Material Aluminum
Basket Color/Finish Black Sandblasted
Magnet Material Ferrite
Magnet Weight 196 Oz (4 x 49 oz)
Displacement Volume 2.23L / 0.078ft3
THIELE & SMALL PARAMETERS
Equivalent Volume Vas 16.84L / 0.594ft3
Free Air Resonance Fs 29Hz
Mechanical Factor Qms 5.169
Electrical Factor Qes 0.473
Total Factor Qts 0.432
Moving Mass Mms 237.173g
Compliance Cms 0.109mm/N
Bl Factor Bl 27.387
Voice Coil Inductance Le 63.69 mH
Diaphragm Area Sd 330.06cm2
DC Resistance Re 3.4+3.4 ohm
Efficiency Bandwidth Product EBP 61.3
RECOMMENDED ENCLOSURES
Sealed Internal Volume 14.2L / 0.5ft3
Sealed Box Output Response F3 41.5Hz
Ported Internal Volume 35.4L / 1.25ft3
Port Size *Square (W x H x Long) 1.16" x 10.31 x 24.49" / 29.5 x 262 x 622.1mm
Port Tuning Frequency FB 30Hz
Ported Box Output Response F3 24Hz
MEASUREMENTS
Overall Diameter 10.96" / 278.5mm
Overall Depth 8.34" / 212mm
Front Mount Baffle Cutout 9.36" / 237.7mm
Mounting Depth 6.91" / 175.5mm
Motor Diameter 6.69" / 170mm
Gross Single Unit Weight 26.5
Dimensions W x L x H 12 x 12 x 9.5
Quantity of Units in Master Carton 2
Gross Master Carton Weight 55
Master Carton Dimensions W x L x H 12.5 x 12.5 x 20.25


1x Diamond Audio NEO1000.1DSP Full DSP 1000W RMS @1Ω CLASS D Monoblock Amplifier With 2CH Outputs (NEO1000.1DSP)


Refined Power Meets Precision Control
The Diamond Audio NEO10001DSP is the definitive solution for audiophiles seeking the perfect balance of raw power and sophisticated tuning. As a high-efficiency Class D Monoblock amplifier , it delivers a robust 1000W RMS at 1Ω, providing the dependable strength needed for high-performance subwoofers while maintaining the pure sonic clarity Diamond Audio is known for.

Advanced Full DSP Integration
Unlike standard monoblock amplifiers, the NEO10001DSP features an integrated, full-service Digital Signal Processor . With 31 bands of parametric EQ , precise crossovers, time delay , and channel linking, you have total command over your soundstage. Whether you are tuning via PC or Android , the NEO Series provides a professional-grade interface to calibrate your system for any acoustic environment.

Seamless OEM & EV Integration
Designed for the modern vehicle landscape, the NEO10001DSP excels in integration with onboard 4CH DSP. It features high-voltage signal inputs (up to 20V) and selectable on-board load resistors (10Ω - 20kΩ) to interface perfectly with complex factory (OEM) systems . Furthermore, its EV-friendly voltage compatibility (8-17V) ensures stable performance in electric and hybrid vehicles without compromising the vehicle’s electrical integrity.

Key Features:
Full 4CH DSP integration: 2CH internal, 2CH output. 31 band parametric EQS per channel, crossovers, time delay, channel linking, PC or Android programming for advanced tuning and much more
Easy OEM integration features:
- Up to 20V signal inputs (High/Low level 20V – 0.4V)
- Selectable on-board load resistors (10Ω, 20Ω, 60Ω, 20kΩ)
- EV friendly voltage compatibility (8V – 17V)
Bluetooth Audio streaming direct to amplifier
Control via IOS or Android App (coming soon)
Marine ready, water-resistant chassis
Staggered RCA connections for clean installations
High-current quick-connect power block
NeoDRC1 Diamond Remote Commander compatible
sold separately)

Extra Information

Brand:
DS18
Weight:
31.50 LBS
RMS Wattage Per Speaker:
1000
UPC:
199730020935
Bundle:
Yes
Feature 1:
This bundle includes a DS18 ZXI10.4D 10" subwoofer and a Diamond Audio NEO1000.1DSP amplifier, offering a powerful audio experience.
Feature 2:
The DS18 subwoofer delivers 800 Watts RMS with a 4Ω dual voice coil, ensuring deep, thunderous bass.
Feature 3:
Diamond Audio's amplifier provides 1000W RMS at 1Ω with full DSP integration for precise sound control.
Feature 4:
Advanced DSP features 31-band EQ, crossovers, and time delay, allowing for professional-grade sound tuning.
Feature 5:
Seamless OEM integration with high-voltage inputs and EV-friendly voltage compatibility for versatile installation.
Condition:
NEW
Weight:
31.5000 lbs
Shipping:
Free 2-Day Shipping!
Special pricing:
Sale!
Check Fitment for Your Vehicle
Use our Fit Guide to verify compatibility in seconds.