Description
Included in this kit
This bundle includes 4x DS18 ZXI8.2D 8" | 600 Watts RMS | 2Ω | DVC Subwoofer, a DS18 ZR2000.1D ZR Mono Class D Subwoofer Amplifier, 2000W RMS at 1 Ohm, Bass Remote Included, a DS18 EBM-FFPUFCG-4X8 4 x 8" Subwoofers| Forward Firing | Underseat | Ported Box | Black Spray Liner Paint Finish, and a Subwoofer Amplifier Integration Interface Compatible With Select GM vehicles with 20-pin and 8-pin connectors. Works on Bose & Non Bose.
4x DS18 ZXI8.2D 8" | 600 Watts RMS | 2Ω | DVC Subwoofer (ZXI8.2D)
DS18 ZXI8.2D 8-Inch High-Excursion Subwoofer, 600 W RMS, Dual 2-Ohm Voice Coils
The ZXI8.2D combines an 8-inch high-excursion design with dual 2-ohm voice coils and 600-watt RMS power handling. A quad-stacked ferrite motor, non-pressed paper cone, and foam surround support its bass performance. DS18 provides recommendations for both sealed and ported enclosures.
Motor and cone design
- 600 W RMS and 1200 W maximum power handling support a high-output 8-inch bass system.
- Dual 2-ohm voice coils and a 2-inch coil diameter give installers wiring flexibility.
- Quad-stacked ferrite magnets provide the motor structure for controlled high-excursion bass.
- A non-pressed paper cone and foam surround support the subwoofer’s bass response.
- DS18 recommends 0.6 cu ft sealed or 1 cu ft ported enclosures, with 35 Hz ported tuning.
Sealed or ported installation
DS18 specifies 0.6 cu ft sealed or 1 cu ft ported internal volume. The specification table lists a 35 Hz port tuning frequency and a 1.75 x 7.99 x 14.67-inch port. Allow 5.51 inches of mounting depth and a 7.31-inch baffle cutout.
| Nominal diameter | 8 inches |
| Voice coils | Dual 2 ohms (2 + 2 ohms) |
| RMS power handling | 600 W |
| Maximum power handling | 1200 W |
| Sensitivity | 86 dB (1 W/1 m) |
| Frequency response | 25-880 Hz |
| Recommended low-pass crossover | 90 Hz |
| Voice coil diameter | 2 inches |
| Cone / surround | Non-pressed paper / foam |
| Magnet | Quad-stacked ferrite, 104 oz |
| Overall diameter | 8.58 inches |
| Overall depth | 6.83 inches |
| Mounting depth | 5.51 inches |
| Front-mount baffle cutout | 7.31 inches |
| Sealed internal volume | 0.6 cu ft / 17 L |
| Ported internal volume | 1 cu ft / 28.3 L |
| Port dimensions (W x H x L) | 1.75 x 7.99 x 14.67 inches |
| Port tuning | 35 Hz |
1x DS18 ZR2000.1D ZR Mono Class D Subwoofer Amplifier, 2000W RMS at 1 Ohm, Bass Remote Included (ZR2000.1D)
DS18 ZR2000.1D ZR Mono Class D Subwoofer Amplifier, 2000W RMS at 1 Ohm, Bass Remote Included
The DS18 ZR2000.1D is a mono Class D amplifier for a dedicated subwoofer system. It delivers 2000W RMS at 1 ohm, 1300W RMS at 2 ohms or 800W RMS at 4 ohms. Low- and high-level inputs support source integration, while the included dash-mount bass control lets you adjust bass level within reach.
Power and control for a subwoofer system
- 2000W RMS at 1 ohm, 1300W at 2 ohms or 800W at 4 ohms powers a dedicated subwoofer system.
- Included dash-mount bass remote puts subwoofer level adjustment within reach.
- Low-level RCA and high-level input capability support different source connections.
- Low-pass, infrasonic and bass-boost controls let you tune the amplifier for your bass system.
- Power, clipping and protection indicators provide visible amplifier status at the chassis.
Installation and tuning
Use a subwoofer load of at least 1 ohm and select a ventilated mounting location. The amplifier accepts 0-gauge power connections, and DS18 recommends a 200A fuse. Set the low-pass, infrasonic and bass-boost controls for the connected subwoofer system. DS18 recommends professional installation.
Technical specifications
| Model | ZR2000.1D |
| Amplifier type | Mono subwoofer; Class D |
| RMS output at 1 / 2 / 4 ohms | 2000 / 1300 / 800 W |
| Peak output | 6000 W |
| Minimum impedance | 1 ohm |
| Frequency response | 10-220 Hz |
| Low-level input range | 0.2-6 V |
| High-level input | Yes |
| Low-pass filter range | 40-180 Hz |
| Infrasonic filter | 10-50 Hz |
| Bass boost | 0-12 dB; 30-80 Hz |
| Power terminal size | 0 GA |
| Recommended fuse | 200 A |
| Remote level control | Included; dash mount |
| Finish | Black brushed aluminum |
| Product L x W x H | 19.13 x 7.24 x 2 in |
1x DS18 EBM-FFPUFCG-4X8 4 x 8" Subwoofers| Forward Firing | Underseat | Ported Box | Black Spray Liner Paint Finish (EBM-FFPUFCG-4X8)
DS18 EBM-FFPUFCG-4X8 Quad 8-Inch Front-Fire Ported Underseat Subwoofer Enclosure, Black, Chevy/GMC and Ford Crew Cabs
The EBM-FFPUFCG-4X8 places 4 8-inch subwoofer mounting positions beneath the rear seat of compatible crew cab trucks. Its front-firing, ported layout supports bass output while preserving cabin space. The black bed liner finish provides a durable exterior.
Key features
- Fits 4 8-inch subwoofers in a quad enclosure for a truck bass-system build.
- Under-rear-seat placement preserves cabin space for passengers and everyday use.
- A front-firing ported design supports enhanced bass output beneath the rear seat.
- A durable black bed liner finish gives the enclosure a protective, understated exterior.
- Fits 2007-2026 Chevy/GMC and 2009-2026 Ford F-150/Super Duty crew cabs; no rear floor hump.
Crew cab installation
DS18 lists this quad enclosure for 2007-2026 Chevy/GMC and 2009-2026 Ford F-150/Super Duty crew cabs. Confirm the vehicle and underseat layout before installation.
| Model | EBM-FFPUFCG-4X8 |
| Subwoofer mounting positions | 4 x 8-inch |
| Enclosure type | Front-fire ported |
| Placement | Under rear seat |
| Finish | Black Bed Liner |
| Chevy/GMC fitment | 2007-2026 Crew Cabs |
| Ford fitment | 2009-2026 F-150/Super Duty Crew Cabs |
1x Subwoofer Amplifier Integration Interface Compatible With Select GM vehicles with 20-pin and 8-pin connectors. Works on Bose & Non Bose (APSUB-GM61)
Integration with today’s advanced vehicle systems like databus controlled amplifiers can be difficult if not impossible. AmpPRO SUB products seamlessly integrate with the databus allowing for full control and optimum sound from a factory radio when adding aftermarket amplifiers.
FEATURES
Upgrade solution for factory, fixed level, data-bus controlled sound systems
Time-saving design, prevents the need for audio correction devices
Retains OnStar, Bluetooth, navigation, safety systems, and all warning chimes
Subwoofer preamp output (5 volt RMS)
Provides flat-low frequency audio output
Customized OE bass center frequency selection
Plug-n-play installation
Remote sub level controller included
INCLUDES
Amplifier Installation Adapter
Vehicle Specific Harness
ANC Bypass Harness
Flush Mount Sub Level Controller