Description
Included in this kit
This bundle includes 4x DS18 ZXI8.2D 8" | 600 Watts RMS | 2Ω | DVC Subwoofer, a DS18 ZR2000.1D ZR Mono Class D Subwoofer Amplifier, 2000W RMS at 1 Ohm, Bass Remote Included, a DS18 EBM-FFPGLAD-4X8 Quad 8-Inch Ported Under-Seat Subwoofer Enclosure for Jeep Gladiator - Black, and a Subwoofer Amplifier Integration Interface for Select 2013-2019 Chrysler, Dodge, Jeep, and RAM vehicles with amplified sound systems Amplified vehicle only.
4x DS18 ZXI8.2D 8" | 600 Watts RMS | 2Ω | DVC Subwoofer (ZXI8.2D)
DS18 ZXI8.2D 8-Inch High-Excursion Subwoofer, 600 W RMS, Dual 2-Ohm Voice Coils
The ZXI8.2D combines an 8-inch high-excursion design with dual 2-ohm voice coils and 600-watt RMS power handling. A quad-stacked ferrite motor, non-pressed paper cone, and foam surround support its bass performance. DS18 provides recommendations for both sealed and ported enclosures.
Motor and cone design
- 600 W RMS and 1200 W maximum power handling support a high-output 8-inch bass system.
- Dual 2-ohm voice coils and a 2-inch coil diameter give installers wiring flexibility.
- Quad-stacked ferrite magnets provide the motor structure for controlled high-excursion bass.
- A non-pressed paper cone and foam surround support the subwoofer’s bass response.
- DS18 recommends 0.6 cu ft sealed or 1 cu ft ported enclosures, with 35 Hz ported tuning.
Sealed or ported installation
DS18 specifies 0.6 cu ft sealed or 1 cu ft ported internal volume. The specification table lists a 35 Hz port tuning frequency and a 1.75 x 7.99 x 14.67-inch port. Allow 5.51 inches of mounting depth and a 7.31-inch baffle cutout.
| Nominal diameter | 8 inches |
| Voice coils | Dual 2 ohms (2 + 2 ohms) |
| RMS power handling | 600 W |
| Maximum power handling | 1200 W |
| Sensitivity | 86 dB (1 W/1 m) |
| Frequency response | 25-880 Hz |
| Recommended low-pass crossover | 90 Hz |
| Voice coil diameter | 2 inches |
| Cone / surround | Non-pressed paper / foam |
| Magnet | Quad-stacked ferrite, 104 oz |
| Overall diameter | 8.58 inches |
| Overall depth | 6.83 inches |
| Mounting depth | 5.51 inches |
| Front-mount baffle cutout | 7.31 inches |
| Sealed internal volume | 0.6 cu ft / 17 L |
| Ported internal volume | 1 cu ft / 28.3 L |
| Port dimensions (W x H x L) | 1.75 x 7.99 x 14.67 inches |
| Port tuning | 35 Hz |
1x DS18 ZR2000.1D ZR Mono Class D Subwoofer Amplifier, 2000W RMS at 1 Ohm, Bass Remote Included (ZR2000.1D)
DS18 ZR2000.1D ZR Mono Class D Subwoofer Amplifier, 2000W RMS at 1 Ohm, Bass Remote Included
The DS18 ZR2000.1D is a mono Class D amplifier for a dedicated subwoofer system. It delivers 2000W RMS at 1 ohm, 1300W RMS at 2 ohms or 800W RMS at 4 ohms. Low- and high-level inputs support source integration, while the included dash-mount bass control lets you adjust bass level within reach.
Power and control for a subwoofer system
- 2000W RMS at 1 ohm, 1300W at 2 ohms or 800W at 4 ohms powers a dedicated subwoofer system.
- Included dash-mount bass remote puts subwoofer level adjustment within reach.
- Low-level RCA and high-level input capability support different source connections.
- Low-pass, infrasonic and bass-boost controls let you tune the amplifier for your bass system.
- Power, clipping and protection indicators provide visible amplifier status at the chassis.
Installation and tuning
Use a subwoofer load of at least 1 ohm and select a ventilated mounting location. The amplifier accepts 0-gauge power connections, and DS18 recommends a 200A fuse. Set the low-pass, infrasonic and bass-boost controls for the connected subwoofer system. DS18 recommends professional installation.
Technical specifications
| Model | ZR2000.1D |
| Amplifier type | Mono subwoofer; Class D |
| RMS output at 1 / 2 / 4 ohms | 2000 / 1300 / 800 W |
| Peak output | 6000 W |
| Minimum impedance | 1 ohm |
| Frequency response | 10-220 Hz |
| Low-level input range | 0.2-6 V |
| High-level input | Yes |
| Low-pass filter range | 40-180 Hz |
| Infrasonic filter | 10-50 Hz |
| Bass boost | 0-12 dB; 30-80 Hz |
| Power terminal size | 0 GA |
| Recommended fuse | 200 A |
| Remote level control | Included; dash mount |
| Finish | Black brushed aluminum |
| Product L x W x H | 19.13 x 7.24 x 2 in |
1x DS18 EBM-FFPGLAD-4X8 Quad 8-Inch Ported Under-Seat Subwoofer Enclosure for Jeep Gladiator - Black (EBM-FFPGLAD-4X8)
DS18 EBM-FFPGLAD-4X8 Quad 8-Inch Ported Under-Seat Subwoofer Enclosure for Jeep Gladiator - Black
Bring a quad-subwoofer bass system to your Jeep Gladiator with the DS18 EBM-FFPGLAD-4X8. Designed for four 8-inch subwoofers, this vehicle-specific enclosure fits beneath the rear seat, making use of the cabin’s under-seat space.
Features
- Quad 8-Inch Capacity: Build your chosen four-subwoofer system in a dedicated enclosure designed to accommodate four 8-inch subwoofers.
- Ported for Powerful Bass: The ported, precision-tuned design provides the foundation for a powerful bass installation.
- Designed for Jeep Gladiator: Manufacturer-listed fitment covers 2018–2026 Jeep Gladiator vehicles, with a vehicle-specific shape that simplifies enclosure fitment.
- Under-Seat Installation: Designed for installation beneath the rear seat to make use of the Gladiator cabin’s under-seat space.
- Durable Black Finish: Protective construction and a solid black finish give your audio build a clean, finished appearance.
| Model | EBM-FFPGLAD-4X8 |
| Enclosure type | Ported |
| Subwoofer capacity | Four |
| Subwoofer size | 8 inches |
| Vehicle fitment | 2018-2026 Jeep Gladiator |
| Installation location | Under rear seat |
| Finish | Black |
1x Subwoofer Amplifier Integration Interface for Select 2013-2019 Chrysler, Dodge, Jeep, and RAM vehicles with amplified sound systems Amplified vehicle only (APSUB-CH41)
Integration with today’s advanced vehicle systems like databus controlled amplifiers can be difficult if not impossible. AmpPRO SUB products seamlessly integrate with the databus allowing for full control and optimum sound from a factory radio when adding aftermarket amplifiers.
FEATURES
Upgrade solution for factory, fixed level, data-bus controlled sound systems Time-saving design, prevents the need for audio correction devices
Subwoofer preamp output (5 volt RMS)
Provides flat-low frequency audio output
Customized OE bass center frequency selection
Plug-n-play installation
Remote sub level controller included
INCLUDES
Amplifier Installation Adapter
Vehicle Specific Harness
ANC Bypass Harness
Flush Mount Sub Level Controller