JBL 4086AM 8-channel Class D Amplifier Design with Digital Signal Processing

JBL DSP Amplifier is an audio processor for fine-tuning of aftermarket audio systems. It is a self-contained audio system with 6-channel audio inputs, 8-channel powered audio outputs, an easy to use tuning interface a novice can understand and detailed tuning capabilities to satisfy even experienced installers.

With a USB connection to access the tuning interface using a Windows PC, you can control fully variable crossovers, selectable 0-to-48dB slopes, time delay, 31-band parametric or graphic EQ adjustment, assignable input to output mixer with input channel summing, channel gain, master volume control, clipping indicator to ensure the audio output is not distorted and ability to save up to 10 presets.

What’s in the box:
DSP Amplifier
Wiring Harness
USB Drive with Tuning Software
USB Tuning Cable
Wired remote level bass control
Mounting hardware
6 x hi level input adapters
Spare fuse
4 x wire ties
2 x JBL sticker
Quick Start Guide

Technical specifications:
Max Power: 1000W peak
RMS Power Output @ 2Ω: 60W x 8, Less Than 1% THD+N
RMS Power Output @ 4Ω: 40W x 8, Less Than 1% THD+N
Variable crossovers with hi-pass, lo-pass, band-pass capability & adjustable 0–to–48dB slopes
Selectable EQ adjustment: Parametric or Graphic
Selectable 12V/Signal Sense/DC Offset turn-on modes, with 12V remote output
Frequency Response: 10Hz to 22kHz @ -3dB
Signal-to-Noise Ratio: >90dB @ 4Ω
Subwoofer Level Control: -30dB to +6dB
Fuse Rating: 40A
Operating Voltage: 8V to 16V