Description
Included in this kit
This bundle includes a Goldhorn DSPA-1012-Plus 10-Channel Class D DSP Amplifier with 12 RCA Outputs and Bluetooth, and a GoldenHorn GD16 (DSP Remote Controller) Dsp Remote controller for Volume/Sub/Preset control. Compatible with all DSP & DSPA Products.
1x Goldhorn DSPA-1012-Plus 10-Channel Class D DSP Amplifier with 12 RCA Outputs and Bluetooth (DSPA-1012-Plus)
Goldhorn DSPA-1012-Plus 10-Channel Class D DSP Amplifier with 12 RCA Outputs and Bluetooth
The DSPA 1012 Plus pairs ten amplified channels with twelve RCA outputs for a substantial vehicle audio upgrade. Eight 50W RMS channels and two 100W RMS channels at 4 ohms provide separate power options, supported by independent DSP control and multiple source inputs.
Features and system use
- Power eight channels at 50W RMS and two channels at 100W RMS, all rated at 4 ohms.
- Twelve high-level inputs, two RCA inputs, optical, and coaxial connections support source integration.
- Twelve 5.6V RCA outputs feed processed audio to external amplifiers for expanded installations.
- A 31-band output EQ and 0–20ms time alignment support precise channel-by-channel system tuning.
- Bluetooth codec support and eight sound presets make it easier to switch sources and saved setups.
Integration
The manual identifies one bridged output at 200W RMS into 4 ohms. RCA inputs 11 and 12 share channels with their high-level counterparts and cannot be used at the same time.
| Amplifier RMS output at 4 ohms | 8 x 50W + 2 x 100W |
| Amplifier maximum output at 4 ohms | 8 x 80W + 2 x 150W |
| High-level inputs | 12 |
| RCA inputs / outputs | 2 inputs / 12 outputs |
| RCA output voltage | 5.6V |
| Digital inputs | Optical and coaxial, up to 192kHz/24-bit PCM stereo |
| Output EQ | 31-band parametric |
| Time alignment | 0–20ms, 0.02ms steps |
| Dimensions (L x W x H) | 296 x 217 x 43mm |
1x GoldenHorn GD16 (DSP Remote Controller) Dsp Remote controller for Volume/Sub/Preset control. Compatible with all DSP & DSPA Products (GD16)
Goldhorn GD16 DSP Remote Controller with Rotary Volume, Bass and Preset Control
The Goldhorn DSP remote controller puts the processor’s everyday volume, bass, and saved-mode controls at a compact rotary interface. Its numeric LED display and separate VOL, MODE, and BASS indicators show the active setting as you make adjustments.
Features and system use
- Adjust total system volume from the rotary control while the LED display shows the current level.
- Press the rotary switch to select saved sound modes, then press again to confirm the selection.
- Set the volume of all bass channels together from the dedicated BASS adjustment mode.
- Separate VOL, MODE, and BASS indicators identify which function the control is adjusting.
- Mode and bass adjustment return automatically to normal volume display after five seconds of inactivity.
Integration
Connect the controller to the device’s remote terminal. The manufacturer manual states that the controller cannot be used while the device is connected to a PC or laptop.
| Product | DSP remote controller |
| Interface | Rotary switch and numeric LED display |
| Functions | Total volume; mode selection; bass-channel volume |
| Indicators | VOL / MODE / BASS |
| Connection | Remote terminal on a compatible Goldhorn device |
| Dimensions as published | 63 x 31 x 15mm |