Description
Included in this kit
This bundle includes a Goldhorn DSPA-406-V2 4-Channel Class AB DSP Amplifier with USB-OTG and Bluetooth 5.0, and a Goldhorn OTG Data Cable Set with 5m USB Audio Cable and 0.15m Adapter.
1x Goldhorn DSPA-406-V2 4-Channel Class AB DSP Amplifier with USB-OTG and Bluetooth 5.0 (DSPA-406-V2)
Goldhorn DSPA-406-V2 4-Channel Class AB DSP Amplifier with USB-OTG and Bluetooth 5.0
The DSPA 406 V2.0 combines four Class AB amplifier channels with DSP adjustment for an entry-level car audio upgrade. Six RCA outputs support additional amplification, and USB-OTG and Bluetooth inputs give compatible mobile devices a direct route into the system.
Features and system use
- Power four speakers with 30W RMS per channel at 4 ohms from the integrated Class AB amplifier.
- Six RCA outputs provide processed signals for adding external amplifiers to the system.
- USB-OTG accepts audio up to 192kHz/32-bit from a compatible connected mobile device.
- Bluetooth 5.0 supports aptX HD, aptX, AAC, and SBC for convenient wireless music playback.
- Adjust 31-band output EQ, crossover filters, and channel delay to tailor the sound inside the vehicle.
Integration
Separate analog and Bluetooth dynamic loudness settings, input equalization, and per-channel crossover controls support careful integration with the source and speakers.
| Amplified output | 4 x 30W RMS at 4 ohms; 4 x 65W maximum at 4 ohms |
| Inputs | 4 high-level; 2 RCA; 1 USB-DAC/USB-OTG |
| RCA outputs | 6, 4Vrms |
| Bluetooth | 5.0; aptX HD, aptX, AAC, SBC |
| Output EQ | 31-band parametric, ±15dB in 0.1dB steps |
| Input EQ | 5-band parametric |
| Output delay | 0–20ms |
| Frequency response | 20Hz–40kHz |
| Dimensions as published | 180 x 129 x 36mm |
| Weight | 1.08kg |
1x Goldhorn OTG Data Cable Set with 5m USB Audio Cable and 0.15m Adapter (OTG Data Cable Set)
Goldhorn OTG Data Cable Set with 5m USB Audio Cable and 0.15m Adapter
This Goldhorn USB-OTG cable set connects a compatible phone to a Goldhorn DSP or player equipped with OTG functionality. The 5m audio cable incorporates a signal amplifier chip for long-distance transmission, with a short adapter included in the illustrated set.
Features and system use
- A 5m cable provides reach between a compatible Goldhorn audio component and the phone connection.
- The built-in amplifier chip supports stable audio-signal transmission over the extended cable run.
- A 0.15m USB adapter completes the set shown in the manufacturer’s connection diagram.
- Multilayer shielding helps protect the audio signal against interference along the cable path.
- The manufacturer lists Android and iPhone 15–17 series use with Goldhorn products featuring OTG.
Integration
Confirm that the specific Goldhorn product supports OTG before connection. The manufacturer illustration lists compatible Android phones and iPhone 15–17 series devices.
| Type | Car-specific USB-DAC/USB-OTG audio adapter cable set |
| Main cable length | 5m |
| Adapter length | 0.15m |
| Signal extension | Built-in amplifier chip |
| Shielding | Multilayer interference protection |
| Jacket material | PVC |
| Device requirement | Goldhorn DSP or player featuring OTG functionality |