Description
Included in this kit
This bundle includes a Goldhorn DSPA-406-V2 4-Channel Class AB DSP Amplifier with USB-OTG and Bluetooth 5.0, a Gladen RC-600C1 Mono Class D Amplifier: 1 X 600w, and a Gladen RS-X 10 High Performance 10" Subwoofer (300/450 Watt 4 Ohm).
1x Goldhorn DSPA-406-V2 4-Channel Class AB DSP Amplifier with USB-OTG and Bluetooth 5.0 (DSPA-406-V2)
Goldhorn DSPA 406 V2.0
Goldhorn DSPA-406-V2 4-Channel Class AB DSP Amplifier with USB-OTG and Bluetooth 5.0
The DSPA 406 V2.0 combines four Class AB amplifier channels with DSP adjustment for an entry-level car audio upgrade. Six RCA outputs support additional amplification, and USB-OTG and Bluetooth inputs give compatible mobile devices a direct route into the system.
4 x 30W RMS at 4 ohms; 4 x 65W maximum at 4 ohms4 high-level; 2 RCA; 1 USB-DAC/USB-OTG6, 4Vrms
Features and system use
- Power four speakers with 30W RMS per channel at 4 ohms from the integrated Class AB amplifier.
- Six RCA outputs provide processed signals for adding external amplifiers to the system.
- USB-OTG accepts audio up to 192kHz/32-bit from a compatible connected mobile device.
- Bluetooth 5.0 supports aptX HD, aptX, AAC, and SBC for convenient wireless music playback.
- Adjust 31-band output EQ, crossover filters, and channel delay to tailor the sound inside the vehicle.
Integration
Separate analog and Bluetooth dynamic loudness settings, input equalization, and per-channel crossover controls support careful integration with the source and speakers.
Technical specifications
| Amplified output | 4 x 30W RMS at 4 ohms; 4 x 65W maximum at 4 ohms |
| Inputs | 4 high-level; 2 RCA; 1 USB-DAC/USB-OTG |
| RCA outputs | 6, 4Vrms |
| Bluetooth | 5.0; aptX HD, aptX, AAC, SBC |
| Output EQ | 31-band parametric, ±15dB in 0.1dB steps |
| Input EQ | 5-band parametric |
| Output delay | 0–20ms |
| Frequency response | 20Hz–40kHz |
| Dimensions as published | 180 x 129 x 36mm |
| Weight | 1.08kg |
1x Gladen RC-600C1 Mono Class D Amplifier: 1 X 600w (RC-600C1)
Mono Class D Amplifier: 1 X 600w
RC 600c1 Features:
• Input with low- or high-level signal
• High-level with autosense function (no remote signal required)
• Low Pass Filter from 40 to 220 Hz
• Subsonic Filter from 10 to 50 Hz
• Bass Boost Level: -6dB, 0dB or +6dB
• Wired Remote controller RC-RTC (optional)
• Protection for overheating, overloading, short circuitry and speaker DC protection
• Massive heavy aluminum-heat sink
• Mono digital amplifier
• High-Level with Auto Sense
• Double Side PCB and
• SMD components
• Optional remote available
Specifications:
• Power in RMS @ 4 Ohm per channel: 1 x 360 Watt
• Power in RMS @ 2 Ohm mono: 1 x 560 Watt
• Size: 208 x 147 x 50 mm
1x Gladen RS-X 10 High Performance 10" Subwoofer (300/450 Watt 4 Ohm) (RS-X-10)
High Performance 10" Subwoofer (300/450 Watt 4 Ohm)
RS-X-10 Features:
• Vented die-cast basket
• Black Nomex spider
• Paper cone
• PP-dust cap
• 10″/25 cm
• 450/300 Watt
• 4 ohm impedance
• 2″ voice coil
• Vented box 32 l or sealed box 22 l
Diameter:
• External diameter 263 mm / 10,35 inch
• Installation diameter 238 mm / 9,37 inch
• Installation depth 140 mm / 5,51 inch
• Magnet diameter 162 mm / 6,38 inch
Specifications:
• Power: 300/450 RMS
• DC Resistance: 3,74 Ohms
• Nominal Impedance: 4 Ohms
• Resonance Frequency: 35,57
• Voice Coil Diameter: 2,5"
• Xmax: 10mm
• Moving Mass: 121,6g
• Effective Piston Area: 346 cm2
• Mechanical Resistance: 4,79 Kg/s
• Compliance: 0,16 mm/N
• Force Factor: 13,82 Tm
• Equivalent Air Volume: 27,69 dm3