Description
Included in this kit
This bundle includes a Goldhorn DSP10 10-Channel Car Audio Digital Signal Processor with Bluetooth 5.0, and a Mosconi GLADEN ONE 80.4, 4 -Channel Class AB Amplifier; 4 X 80w.
1x Goldhorn DSP10 10-Channel Car Audio Digital Signal Processor with Bluetooth 5.0 (DSP10)
Goldhorn DSP10
Goldhorn DSP10 10-Channel Car Audio Digital Signal Processor with Bluetooth 5.0
The DSP10 gives a vehicle audio system ten RCA output channels with independent tuning. Eight high-level inputs and an optical input support source integration, while Bluetooth 5.0 adds wireless playback without replacing the processor’s channel-by-channel controls.
Stand-alone digital signal processor810
Features and system use
- Route eight high-level inputs to ten RCA outputs for a separately amplified car audio system.
- Tune each output with a 31-band equalizer, time delay, and gain control to shape the soundstage.
- Stream with Bluetooth 5.0 supporting aptX HD, aptX, AAC, and SBC audio codecs.
- Dynamic loudness control preserves low-frequency dynamics and high-frequency detail at lower levels.
- Goldhorn SKYATOM Surround support adds virtual surround processing for an immersive listening setup.
Integration
The DSP10 processes signals for downstream amplification. Independent equalization, delay, and gain let the installer tailor each channel to its role in the vehicle.
Technical specifications
| Type | Stand-alone digital signal processor |
| High-level inputs | 8 |
| RCA outputs | 10 |
| Digital input | Optical |
| Bluetooth | 5.0; aptX HD, aptX, AAC, SBC |
| Output EQ | 31 bands |
| DSP / ADC / DAC | ADAU1452 / PCM1840 / PCM1690 |
1x Mosconi GLADEN ONE 80.4, 4 -Channel Class AB Amplifier; 4 X 80w (GLADEN-ONE-80.4)
4 -Channel Class AB Amplifier; 4 X 80w
Features:
• 4 channel amplifier
• Black finishing
• Power Rating: 80 Watt per channel @ 4 Ohm < 1% THD+N
• Sn Ratio: > XX dBA (ref: 1 Watt into 4 Ohm)
• G-HOC socket per channel pair for G_HP & LP, G_FSA, G_MONO,
• RTC_MOS and HOC e.g. BMW
• HP or LP filter switchable
• Improved input interface, better noise rejection
• AnalogDevice Ics, improved DC-DC converter
• Surge protection on battery supply rail
• More SMD / less “traditional” components in the past
Power Supply:
• Power supply voltage: 11- 16V
• DC-DC converter typology: Unregulated – Push Pull
• Internal Fuse: 2 x 25A
• Autosense Power-On: In High Level Mode Only
• Overall Efficiency: >60%
Signal Input:
• Input sensitivity range 0.35 ÷ 16V
• Input impedance (Hgih level mode): 47Ohm (floating)
• Input impedance (Low level mode): 10kOhm (ground referenced)
• Input CMRR: > 80dB
• Input Interface Configuration: Fully Differential
Connections:
• Low Level Input: RCA
• High Level Input: RCA
• Remote Control RTC (Optional) Modular Jack