Description
Included in this kit
This bundle includes a Goldhorn DSPA-816-Pro 8-Channel Class D DSP Amplifier with Bluetooth and 8 RCA Outputs, a Mosconi PICO1V2 1 Channel PWM Amplifier, a Mosconi EXT2RCA, 2-Channel Adapter Cable To Enable Rca Connections (For Pico And Atomo), and a Gladen RS-X 10 High Performance 10" Subwoofer (300/450 Watt 4 Ohm).
1x Goldhorn DSPA-816-Pro 8-Channel Class D DSP Amplifier with Bluetooth and 8 RCA Outputs (DSPA-816-Pro)
Goldhorn DSPA-816-Pro 8-Channel Class D DSP Amplifier with Bluetooth and 8 RCA Outputs
The DSPA 816 Pro combines eight Class D amplifier channels with eight RCA outputs for a multichannel car audio system. Its analog and digital inputs work with independent equalization and time alignment so each speaker channel can be tuned for the vehicle.
Features and system use
- Drive eight speakers with 50W RMS per channel at 4 ohms, with 80W maximum per channel.
- Eight RCA outputs allow processed signals to feed external amplifiers for system expansion.
- Optical and coaxial inputs accept PCM stereo signals up to 192kHz/24-bit.
- Adjust 31-band output EQ and time alignment up to 20ms in 0.02ms steps for channel-specific tuning.
- Bluetooth codec support includes aptX HD, aptX, AAC, and SBC, with eight sound-setup presets.
Integration
High-level and RCA inputs 7 and 8 cannot be used simultaneously. The eight amplified outputs are unbridgeable, and USB Type B connects a PC for DSP setup.
| Amplifier output | 8 x 50W RMS at 4 ohms; 8 x 80W maximum |
| Inputs | 8 high-level; 2 RCA; optical; coaxial |
| Digital input format | PCM stereo, up to 192kHz/24-bit |
| RCA outputs | 8, 5.6V |
| Output EQ | 31-band parametric |
| Time alignment | 0–20ms, 0.02ms steps |
| Operating voltage | 10–16V |
| Dimensions (L x W x H) | 217 x 170 x 43mm |
1x Mosconi PICO1V2 1 Channel PWM Amplifier (PICO1V2)
Mosconi Pico 1 V2 Mono Amplifier
The Mosconi Pico 1 V2 is a compact full-range PWM mono amplifier designed to deliver substantial output power while maintaining efficient operation. Using separate, synchronized modulation and fast high-current MOSFET output devices, the Pico 1 V2 is capable of delivering up to 900 watts RMS into a 1-ohm load.
Its flexible input stage supports both high-level and low-level signals, allowing the amplifier to integrate into a wide variety of audio systems. With built-in filtering and optional remote volume control capability, the Pico 1 V2 can function as a dedicated subwoofer amplifier or as a powerful supplement to Mosconi Pico DSP amplifier systems.
Key Features
- Full-range PWM mono amplifier design
- Synchronized modulation with high-current MOSFET output stage
- High-level and low-level inputs for flexible system compatibility
- Automatic turn-on when using high-level input (Off / BTL modes)
- Optional remote volume control capability
- Molex connectors for streamlined wiring
Performance & Filtering
The Pico 1 V2 provides adjustable system tuning with an integrated low-pass crossover and built-in subsonic protection. The low-pass filter is adjustable from 45 Hz to 310 Hz with a 12 dB/octave slope, while the always-active 13 Hz subsonic filter helps protect subwoofers from ultra-low frequencies.
With a wide input sensitivity range from 0.3V to 20V, the amplifier can easily match both aftermarket and factory audio sources.
Compact Installation Design
Designed for space-conscious installations, the Pico 1 V2 features a compact chassis measuring just 150 x 115 x 46 mm. Despite its small footprint and lightweight 1050 g construction, it delivers high output capability suitable for demanding subwoofer applications or powerful front-stage reinforcement.
Technical Specifications
| Amplifier Type | Full-range PWM Mono Amplifier |
|---|---|
| Output Power RMS @ 4Ω | 1 × 350 Watts |
| Output Power RMS @ 2Ω | 1 × 600 Watts |
| Output Power RMS @ 1Ω | 1 × 900 Watts |
| Input Voltage | 0.3 V – 20 V |
| Overall Efficiency | > 75% |
| Auto Turn-On | High Level Only (Off / BTL) |
| Low-Pass Filter | Off / 45 – 310 Hz (12 dB/Oct) |
| Subsonic Filter | 13 Hz (12 dB/Oct, Always On) |
| Dimensions | 150 x 115 x 46 mm |
| Weight | 1050 g |
1x Mosconi EXT2RCA, 2-Channel Adapter Cable To Enable Rca Connections (For Pico And Atomo) (EXT2RCA)
2-Channel Adapter Cable To Enable RCA Connections (For Pico And Atomo)
1x Gladen RS-X 10 High Performance 10" Subwoofer (300/450 Watt 4 Ohm) (RS-X-10)
High Performance 10" Subwoofer (300/450 Watt 4 Ohm)
RS-X-10 Features:
• Vented die-cast basket
• Black Nomex spider
• Paper cone
• PP-dust cap
• 10″/25 cm
• 450/300 Watt
• 4 ohm impedance
• 2″ voice coil
• Vented box 32 l or sealed box 22 l
Diameter:
• External diameter 263 mm / 10,35 inch
• Installation diameter 238 mm / 9,37 inch
• Installation depth 140 mm / 5,51 inch
• Magnet diameter 162 mm / 6,38 inch
Specifications:
• Power: 300/450 RMS
• DC Resistance: 3,74 Ohms
• Nominal Impedance: 4 Ohms
• Resonance Frequency: 35,57
• Voice Coil Diameter: 2,5"
• Xmax: 10mm
• Moving Mass: 121,6g
• Effective Piston Area: 346 cm2
• Mechanical Resistance: 4,79 Kg/s
• Compliance: 0,16 mm/N
• Force Factor: 13,82 Tm
• Equivalent Air Volume: 27,69 dm3