Description
Included in this kit
This bundle includes a Hertz DBA 201F 8" (200mm) Super-Flat Active Under-Seat Sub Box, a Memphis Audio 10GKIT 10-Gauge Amp Install Kit- ATC Fuse Holder With 30A Fuse, And A Pair Of ETP-17 17-Foot RCAs, and a Kicker 46KISL K-Series Interconnect, Speaker Wire To RCA Adapter.
1x Hertz DBA 201F 8" (200mm) Super-Flat Active Under-Seat Sub Box (DBA-201F)
High performance in a super flat design
The DBA 201 F flat active subwoofer enclosure optimized with FEM simulation ensures superior performance, maximizing the subwoofer output with a super flat size. The massive magnet of the 8 in. driver provides optimal control during the highest cone excursion.
Extra full set of controls to fine-tune the in-car performance
The built-in 24 dB/Oct. low-pass crossover filter with a variable cutting corner frequency (50÷150 Hz) allows you to perfectly match the DBA 201 F to your speaker system. Adjustable bass boost (0÷6 dB @ 45Hz) can add bass output as you prefer, allowing correction for OEM sound equalization. With the phase inverter (0-180°), you can optimize phase alignment between the DBA 201 F and your speaker system, regardless of the subwoofer’s position in the car.
Technical Specs
Size mm (in.): 200 (8)
Power Handling - Continuous W: 220
Power Handling - Peak W: 440
Impedance Ohm: 0.4
Design: Super Flat Sealed
Voice Coil Ø: 38.6 (1.52) mm (in.)
Frequency Response Hz: 32 ÷ 400
Magnet size D x d x h mm (in.): 110 x 45 x 17 (4.33 x 1.78 x 0.67)
Weight of one component kg (lb.): 4.3 (9.48)
Magnet: High Density Flux Ferrite
Cone: Pressed paper
Voice Coil Type: Copper
Power Supply
Operating voltage VDC (Fuse): 6.5 ÷ 18 (15A)
Start - Stop voltage VDC: 6
Idling current A (Power OFF): 260 m (1 m)
Consumption @ 14,4 VDC Max musical power A: 8.5
Remote IN Turn on VDC (Current): 4 (1 mA)
PRE input signal Turn ON VRMS: 10 mV
SPK input DC Turn ON VDC: 2
Amplifier Stage
Distortion - THD @ 100 Hz %: 0.15
Bandwidth Hz: 15 - 150
S/N ratio dBA: 100
Output power (RMS) @ 14,4 VDC, 1% THD W: 220
Signals Inputs / Filter
PRE input signal VRMS (impedance): 0.2 ÷ 5 (10kΩ)
SPK input signal VRMS (impedance): 1.2 ÷ 30 (6Ω)
LO-PASS Filter @ 24 dB Oct adjustable Hz: 50 ÷ 150
Subsonic Filter @ 24 dB Oct Fixed Hz: 15
Phase switch: 0 / 180°
Bass Boost @45 Hz dB: 0 ÷ 6
Sub remote volume control dB: 0 ÷ -15 (HRC 01 included)
1x Memphis Audio 10GKIT 10-Gauge Amp Install Kit- ATC Fuse Holder With 30A Fuse, And A Pair Of ETP-17 17-Foot RCAs (10GKIT)
Amazing sound starts with amazing connection. To achieve maximum performance a system requires clean power. Memphis relies on the highest quality pure copper wire for all of our connection pieces. Don't be fooled by the competition offering inexpensive wire backed by false claims. For the ultimate performance in audio connections look no further than Memphis Connection wire.
Includes all the essential tools to complete a quality installation
100% pure copper wire
True AWG rated wire
Power and ground distribution blocks included
Maximizes your audio performance
Extends the life of your audio equipment
Includes RCAs
1x Kicker 46KISL K-Series Interconnect, Speaker Wire To RCA Adapter (46KISL)
Kicker 46KISL 2 Channel Speaker Wire to RCA Converter.
K Series Interconnects feature split-pin RCAs with silver-tinned, OFC wire for superior bass response and signal clarity. The K-Grip dual-mold connectors offer sure grip and ergonomic shape for slip-free installation, and a union that’s ultra-slim for snag-free cable routing in tight places.
KISL 2-ch speaker-to-RCA converter, no LOC
KISL features 16ga speaker wire-to-RCAs and includes Female to Female adapters.
Don’t have an aftermarket radio? KICKER amplifiers accept a wide range of factory speaker signal. Use the KISL to easily connect factory speaker wires right to your amplifier. No line out converter needed!