Description
Included in this kit
This bundle includes a JBL CLUB-A6001A High performance mono subwoofer car amplifier, and 2x JBL CLUB102SL Club Series 10” Shallow Mount Subwoofer w/SSI™ (Selectable Smart Impedance) Switch From 2 To 4 Ohm.
1x JBL CLUB-A6001A High performance mono subwoofer car amplifier (Club-A6001A)
The JBL Club A600 mono subwoofer amplifier delivers 600-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car’s factory radio. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure, while a phase switch ensures that the bass will blend well with your full-range speakers.
What’s in the box:
One Club A600 mono subwoofer car amplifier
Four 30A ATO fuses (2 installed, 2 spare)
2 Bare wire-to-RCA adapters
Remote bass control module
16.5' Remote control cable (RJ-25 plugs on both ends)
2 Self-tapping screws for remote (M3 x 15mm)
4 Mounting screws (M4 x 53mm)
Owner’s Manual
Two JBL stickers
1 logo badage
Technical specifications:
Mono subwoofer car amplifier
350 watts RMS x 1 at 4 ohms
(600 watts RMS x 1 at 2 ohms)
Class D amp technology
Variable low-pass filter (32–320 Hz, 12 dB/octave)
Variable bass boost (0-12dB at 45Hz)
Phase switch (0, 180 degrees)
Preamp and speaker-level inputs
Fuse rating: 30A x 2
8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
W x H x D = 220mm x 51.3mm x 180mm
W x H x D = 8-11/16" x 2-1/16" x 7-1/8"
2x JBL CLUB102SL Club Series 10” Shallow Mount Subwoofer w/SSI™ (Selectable Smart Impedance) Switch From 2 To 4 Ohm (CLUB102SL)
Powerful performance, high flexibility.
JBL Club slim subwoofers deliver deep, powerful bass that will take your system to the next level. Utilizing our proprietary cone design and high-extension surrounds, they are extremely efficient and require less power to do their job. JBL CLUB slim subwoofers perform exceptionally well in both closed and band-pass box configurations, delivering a powerful, punchy, and accurate bass experience in either setup. They also feature SSI™ (Smart Impedance Selectable), a unique impedance switch that lets you select the ideal impedance (2 or 4 ohms) for your chosen amplifier and overall system configuration.
SSI™ (Selectable Smart Impedance)
Most car audio system designs call for 2- or 4-ohm impedance. Club shallow-mount subwoofers feature an exclusive dual impedance switch that lets you choose either load impedance option depending on your particular system and amplifier choice. Not available from any other manufacturer, SSI lets you reconfigure your system by simply flipping a switch.
Aluminum Woofer Cone
A proprietary aluminum woofer cone has been engineered to provide high output while maintaining its shape to full excursion to ensure low distortion and minimal unwanted audible acoustical artifacts. The end result is deep, full bass performance that is musical and impactful.
General Specifications
Subwoofer: 10" (250mm) Aluminum Driver
Power Handling: 350W RMS, 1050W peak
Sensitivity (1W/1m): 82.5dB
Frequency Response (-6dB): 35Hz – 500Hz
Nominal Impedance: 2 or 4 ohms, switch-selectable
Voice Coil Diameter: 2" (50mm)
Cutout Diameter: 9" (228.61mm)
Mounting Depth: 3-1/4" (82.5mm)
What's in The Box?
1x 10" Subwoofer
1x EVA Foam Gasket
1x Owner’s Manual
Retail Box:
12.36”W x 12.36”D x 5.75”H
Master Carton:
12.99”W x 12.99”D x 12.60”H
Retail Box:
8.91lbs.
Master Carton:
19.44 lbs.