Description
Included in this kit
This bundle includes a JBL CLUB-A5055 High-performance 5 channel car amplifier, a JBL CLUB-64C Club Series 6.5" Component Speakers, Pair, a JBL CLUB-64 Club Series 6.5" Two-way Car Audio Speakers, Pair, and a JBL CLUB12 JBLSUBCB102 10” Subwoofer w/SSITM (Selectable Smart Impedance) switch from 2 to 4 ohm.
1x JBL CLUB-A5055 High-performance 5 channel car amplifier (Club-A5055)
The Club A5055 5-channel amplifier delivers a powerful 50-Watts RMS to each of the front and rear speakers in your car, and a pounding 500-Watts RMS to the subwoofer channel — a much smarter ratio of subwoofer-to-full-range power than what is typical in 5-channel amps. You can also bridge the amp to 3-channel mode to deliver 140-Watts RMS to your front speakers while driving your sub with 500-Watts RMS. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car’s factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow you dial in the perfect roll off to best suit speaker placement and cabin acoustics. The subwoofer channel features a low-pass crossover, selectable bass boost, and phase switch to optimize subwoofer performance. What’s in the box: One Club A5055 five channel amplifier 4 Bare wire-to-RCA adapters Six 30A ATO fuses (3 installed, 3 spare) Remote bass control module 16.5’ Remote control cable (RJ-25 plugs on both ends) 2 Self-tapping screws for remote (M3 x 15mm) 4 Mounting screws (M4 x 53mm) Owner’s Manual Two JBL stickers 1 logo badage Technical specifications: 5 channel car amplifier 50 watts RMS x 4 + 320 watts RMS x 1 at 4 ohms 75 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms Variable high- and low-pass filters (32–320Hz, 12dB/octave) on front and rear channels Low-pass filter (32–320Hz, 12dB/octave) on subwoofer channel Bass boost on subwoofer channel (0-12dB at 45Hz) Phase switch on subwoofer channel (0, 180 degrees) Preamp and speaker-level inputs Fuse rating: 30A x 3 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier W x H x D = 360mm x 51.3mm x 180mm W x H x D = 14-3/16" x 2-1/16" x 7-1/8"
1x JBL CLUB-64C Club Series 6.5" Component Speakers, Pair (CLUB-64C)
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.
Plus One™ Woofer Cone Architecture -
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased lowfrequency output and greater musical character.
Adjustable Tweeter Output Level -
The Club 64 and Club 64C,Club 64CTP component systems offer a tweeter output level control of 0dB or +3dB to optimize system linearity based on installation location.
Bigger Magnet, Bigger Power Handling -
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Starfish Tweeter Mounting Adapter -
The Club 64C, Club 64CTP component Speaker system come with the Starfish™ tweeter mounting adapter. The Starfish tweeter mounting adapter allows for easy installation of the tweeter behind factory grilles and in locations such an A-Pillar. It also provides six break-off mounting tabs to accommodate many mounting configurations. The tweeter can be surface- or flush-mounted. The tweeter can be easily serviced, and doesn’t require removing the whole assembly.
1x JBL CLUB-64 Club Series 6.5" Two-way Car Audio Speakers, Pair (CLUB-64)
Club coaxial and component speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One™ design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level. Starfish™ Tweeter Mounting Adapter and I-Mount Tweeter Mounting Kit in component speaker system for easy installation. Available in a range of standard sizes - 3”, 4”, 5-1/4”, 6-1/2”, 6” x 8”, 4” x 6”, 6” x 9”, and 3/4” - they’re the perfect upgrade from factory speakers.
Plus One Woofer Cone Architecture -
Patented (US patent #7,548,631) Plus One™ cones provide more overall speaker-cone area than other speakers for the same size, resulting in higher sensitivity, increased lowfrequency output and greater musical character.
Acoustically Damped, UV-resistant Polypropylene Cone -
Every Club speaker’s woofer cone is designed to deliver clean, non-resonant sound quality, while standing up to the demanding heat and humidity of the car environment.
Bigger Magnet, Bigger Power Handling -
The new Club lineup features a larger magnet delivering higher power handling than competitors at similar price points.
Specifications -
• Power Handling: 60W RMS, 180W peak
• Sensitivity (@ 2.83V): 93dB
• Frequency Response: 48Hz – 21kHz
• Nominal Impedance: 3.0 ohms
1x JBL CLUB12 JBLSUBCB102 10” Subwoofer w/SSITM (Selectable Smart Impedance) switch from 2 to 4 ohm (JBLSUBCB102)
This new JBL CLUB 10" subwoofer is designed to deliver deep bass at an affordable price for drivers. Leveraging technology from JBL’s Professional and Luxury Audio divisions, where loudspeakers fill giant stadiums, concert venues and movie theaters with incredible sound, this subwoofer takes a completely new approach to moving air in a car or SUV. Featuring JBL’s world famous bass response combined with superior technology and power handling, this makes them a great solution for bass in a car.
The 10" woofer features 350w power handling, patented SSI Smart Selectable Impedance providing either a 4- or 2-ohm load. The ultra-high roll surround, parabolic dish two-piece cone, double stacked magnets and long excursion suspension provide for unrivaled bass and performance at this price point. The sleek design of the vented basket and JBL family inspired cosmetics are elegant with a pop of iconic JBL orange. The easy push terminals make installation a snap, and the screw gasket cover creates the perfect finished look.
Features and Technical Highlights:
SSI (Selectable Smart Impedance) – This provides a 2- or 4-ohm impedance for either a single double, for full system building today or build as you go for tomorrow
High-roll surround – Provides long excursion design for deeper bass with less distortion
Vented basket design – Allows for consistent cooling of the 2” voice coil for longer life and more SPL
Double stack magnet – For big power handling, 400 watts RMS
Easy Push terminals – Make installation and hook up easy
Screw cover – Makes the final installation look like a million bucks
JBL Award winning design – Finished off with JBL orange around the cone.
Specifcations:
Power Handling (RMS) – 350 watts
Power handling (Peak) – 1050 watts
VC Impedance – SSI 2- 4-ohms (SSI) Smart Selectable Impedance
Frequency Response – 30-300 Hz
Sensitivity – 83db
Cone – Polypropylene concave dust cap / cone
Basket (trim ring) – Steel basket
Voice Coil – 2”