Description
Included in this kit
This bundle includes a JL Audio XDM600/1 XDM Series Monoblock Class-D Car/Marine Subwoofer Amplifier, 600 W, and a JL Audio SBX-J-JL4DPAS/12TW3-4: Passenger Side - 4 Ω Stealthbox for 2018-Up Jeep Wrangler Unlimited.
1x JL Audio XDM600/1 XDM Series Monoblock Class-D Car/Marine Subwoofer Amplifier, 600 W (XDM600/1)
JL Audio XDM600/1 Monoblock Class D Car/Marine Subwoofer Amplifier, 600 W x 1 @ 2 Ω / 400 W x 1 @ 4 Ω - 14.4V
This potent monoblock amplifier employs JL Audio's high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output from a very compact chassis. Don't let its small size fool you, though... the XDM/600/1 generates serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD).
Designed for car or boat installations, the XDM600/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Targeted specifically for subwoofer applications, the XDM600/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ω | 400 W RMS x 1 |
| @ 3 Ω | 500 W RMS x 1 |
| @ 2 Ω | 600 W RMS x 1 |
| @ 1.5 Ω | N/A |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ω | 300 W RMS x 1 |
| @ 3 Ω | 400 W RMS x 1 |
| @ 2 Ω | 500 W RMS x 1 |
| @ 1.5 Ω | N/A |
General Specifications
| Frequency Response | 7 Hz - 500 Hz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >67 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω | >1000 / 50 Hz |
| Damping Factor @ 2 Ω | >500 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 50 A (AFS, AGU or MaxiFuse™) |
Signal Processing
| Filter Mode(s) | Low-Pass only |
| Filter Slope(s) | 12/24 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | Yes |
| Filter Defeat Function | Yes |
| Infrasonic Filter | 30 Hz, defeatable |
| Bass Boost EQ | No |
| Output Polarity Switch | No |
| Remote Subwoofer Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
| Remote Bass EQ Boost Control | No |
| Pass-Through Preamp Output | Buffered |
Physical Specifications
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 8.52 in / 216 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 6.3 lb / 2.86 kg |
1x JL Audio SBX-J-JL4DPAS/12TW3-4: Passenger Side - 4 Ω Stealthbox for 2018-Up Jeep Wrangler Unlimited (SBX-J-JL4DPAS/12TW3-4)
12" TW3 Stealthbox® for Jeep Wrangler Unlimited (2018-Up) – Passenger Side
This passenger-side Stealthbox® combines a custom-molded sealed enclosure with a 12-inch TW3 thin-line subwoofer to deliver substantial low-frequency performance while maintaining cargo space. The enclosure mounts above the passenger-side rear wheel well for a factory-integrated appearance and efficient use of interior space.
Overview
Integrated Bass Without Lost Storage Space
Designed to fit above the passenger-side rear wheel well, this Stealthbox® enclosure houses a 12-inch TW3 thin-line subwoofer inside a custom-molded sealed enclosure. The result is impressive sub-bass performance while retaining usable cargo room for everyday driving and adventure gear.
- 12-inch TW3 thin-line subwoofer.
- Custom-molded sealed enclosure.
- Passenger-side rear wheel well installation.
- Steel-mesh protective grille included.
Installation Note
Factory Premium Audio Vehicles
If the vehicle is factory-equipped with premium audio, installation of the passenger-side Stealthbox® requires removal of the OEM "subwoofer" and purchase of interior trim parts from Jeep.
| Subwoofer | 12" TW3 Thin-Line |
| Enclosure Type | Sealed, Custom-Molded |
| Power Handling | 400 Watts |
| Available Impedance | 4Ω |
| Weight | 25.6 lbs (11.6 kg) |
| Mounting Location | Above Passenger-Side Rear Wheel Well |
| Vehicle Compatibility | Jeep Wrangler Unlimited (2018-Up) |
| Grille | Steel-Mesh Grille Included |
In The Box
Included Components
- One 12" TW3 thin-line subwoofer in a sealed enclosure
- Mounting hardware
- Documentation