Description
Power Output: 50 Watts RMS x 4 + 300 Watts RMS x 1 at 4 Ohms and ≤1%THD+N
Signal-to-Noise Ratio: 80dBA (Reference: 1Watt into 4Ohms)
Maximum Power Output
MAX POWER: 1600W
Rated Power Output at 14.4V A/B (4 Ohms): 50Watts RMS x 4 (4 Ohms, 20-20kHz, ≤1.0% THD)
A/B (2 Ohms): 75Watts RMS x 4 (2 Ohms, 1kHz, ≤1.0% THD)
SUB (4 Ohms): 300Watts RMS x 1 (4 Ohms, 20-200Hz, ≤0.5% THD)
SUB (2 Ohms): 500Watts RMS x 1 (2 Ohms, 100Hz, ≤0.5% THD)
A/B (Bridged 4Ohms): 150Watts RMS x 2 (Bridged 4 Ohms, 1kHz, ≤1.0% THD)
Specifications
Signal to Noise Ratio: 100dB (Reference: Rated Power into 4Ohms at 14.4V)
Frequency Response: 20Hz-50kHz (+0dB, -3dB) A/B, 20Hz-200Hz (+0dB, -3dB) SUB
Input Impedance: 10k ohm
Speaker Impedance: 4Ω (2Ω to 8Ω allowable)
Bridged connection: 4Ω to 8Ω allowable
Audio Section
Low-Pass Filter: 50Hz-200Hz, -24dB/oct (SUB)
High-Pass Filter: 50Hz-200Hz, -12dB/oct (A/B)
Bass Boost: 40Hz, 0dB - +18dB (SUB)
RCA Input Sensitivity: 0.2[V] - 5.0 [V]
Speaker Level Input Sensitivity: 4.0 V - 12.0 V
Terminals
Battery & Ground: M6 Screw Type Terminal Block
Speaker Output: M4 Screw Type Terminal Block
General
Dimensions(WxHxD): 9 x 2-3/16 x 7-3/8 [inch]
Operating Voltage: 14.4V（11-16V allowable）[V]
Current Consumption: 58[A]
Key Features
CEA-2006 Compliant
2 Ohms Load Capability
Speaker Level Input with Signal Sensing Turn-on
Power MOS-FET Switching Power Supply
Extruded Aluminum Heat Sink Design
A B Sub Independent Gain Adjustment
