Description
Included in this kit
This bundle includes a Kanto TUKG2PGYG 260W Powered Speakers with Bluetooth 5.4 - Gloss Butter, a Kanto SP32PL 32" Floor Speaker Stands with Security Mounting Screws, Pair, Black, and a Tributaries 4AO-020D 2-Meter Series 4 Toslink Fiber Optic Cable.
1x Kanto TUKG2PGYG 260W Powered Speakers with Bluetooth 5.4 - Gloss Butter (TUKG2PGYG)
Timeless design, focused performance. Tuk delivers high-quality sound through refined acoustics, durable construction, and intuitive usability. A redesigned cabinet, updated DSP, and precision crossover provide a balanced, detailed response. AMT tweeters and 5.25″ aluminum woofers ensure clarity and depth, with versatile connectivity for any setup.
An evolution beyond expectation.
Kanto’s precision AMT tweeter is paired with a 5.25″ Aircomb™ woofer bringing greater depth and dispersion.
More natural. More refined.
Reworked DSP and crossover tuning bring greater balance to every listen. Voices sound more lifelike, instruments feel more distinct, and every detail comes through with a natural, effortless quality.
Activate the 80 Hz crossover and Tuk G2 directs bass frequencies to your connected subwoofer, freeing Tuk to focus on mid and high-frequency detail. The result is less distortion, cleaner detail and a more dynamic listening experience.
Bluetooth 5.4 with aptX Adaptive enables seamless high-resolution streaming, while USB-C, Optical, and dual RCA inputs ensure compatibility with both contemporary and legacy gear.
CONNECTIVITY
2x RCA Line-Level
1x USB-C (24 bit/96 kHz)
1x Optical (TOSLINK) (24 bit/96 kHz)
1x Bluetooth® 5.4 (AptX Adaptive, AAC, SBC)
DRIVERS
28 mm x 35 mm AMT Tweeters
5.25″ Aluminum Drivers
AUDIO
Class D with DSP
260 W Peak Power (130 W Total RMS)
Selectable 80 Hz High/Low-Pass Filter
Frequency Response 50 Hz – 22 kHz
Inputs
2x RCA Line-Level
1x USB-C (24 bit/96 kHz)
1x Optical (TOSLINK) (24 bit/96 kHz)
1x Bluetooth 5.4 (AptX Adaptive, AAC, SBC)
OUTPUTS
Subwoofer Out
USB Charge 5 V/2 A
WHAT'S IN THE BOX
2 x Speakers
Power cord
Infrared Remote Control
Speaker Wire 15′ (5 m)
RCA to 3.5mm Cable 6′ (1.8 m)
8x Rubber feet
User Manual(s)
WEIGHTS & MEASUREMENTS
Dimensions (each speaker)
7.2” W x 10” D x 12” H (18.4 x 25.4 x 30.5 cm)
Net Weight (active): 12.4 lb (5.6 kg)
Net Weight (passive): 11.4 lb (5.2 kg)
¼”-20 threaded bottom mounting hole
1x Kanto SP32PL 32" Floor Speaker Stands with Security Mounting Screws, Pair, Black (SP32PL)
Get the most out of your speakers with the SP series. These low-profile speaker stands feature a rotating top plate to ensure every sound reaches your ears. Each stand is built with heavy-duty steel to reduce undesirable vibration and features a hollow core to conceal cables and speaker wire. For maximum stability, two top plate sizes are provided, each with a mounting hole and 1/4” – 20 screw to secure your YU4, YU6 or other compatible speakers in place.
Features:
Get the most out of your speakers - SP speaker stands allow you to place your speakers at ear-level, giving you the opportunity to pick up every frequency they have to offer. To further improve clarity, their rotating top plates ensure your speakers are always pointed towards you.
Maintain stability on any surface - Interchangeable spiked and rubber dome feet ensure your speakers remain securely in place on both carpet and hardwood flooring.
No one likes cable clutter - Use the hollow support towers to easily route your power cable and speaker wire, ensuring they remain concealed.
The perfect companion - SP speaker stands were designed to work perfectly with YU4 and YU6 powered speakers. Use the screw hole on the base of each speaker to securely fasten them to your stands.
1x Tributaries 4AO-020D 2-Meter Series 4 Toslink Fiber Optic Cable (4AO-020D)
Tributaries 4AO-020D 2 Meter Series 4 Toslink Fiber Optic cable
Tributaries Series 4 Fiber Optic cables are single mode plastic optical fiber made from 1mm crystal-clear fiber cores surrounded by a highly reflective cladding and a protective jacket. The cladding and jacket are applied in concentric layers during the drawing process to prevent damage to the fiber that may occur during a 2 step process. The constant thickness improves losses due to attenuation. The 4AO has highly polished termination ends that resemble the convex look of a camera lens to ensure maximum signal transfer. This procedure ensures less than 0.1dB loss at each termination.
The Series 4 Toslink Fiber Optic cable is stocked in each in lengths from ½ meter to 10 meter
Model 4AO Highlights
Designed, packaged and tested in Orlando Florida, USA
Machine polished convex lenses
1mm single-core plastic optical fiber
Highly reflective polyethylene cladding
Toslink® SJ15 connector with molded cover
Decorative woven jacket over highly flexible black PVC jacket
Available in ½ meter to 10 meter lengths