Description
Included in this kit
This bundle includes 3x Kicker 48KMXL65 6.5" 4-Ohm RGB-LED KMXL Horn-Loaded Marine Coaxial Speakers, Pair, a Kicker KMF10 10-inch (25cm) Weather-Proof Subwoofer for Freeair Applications, 4-Ohm, a Kicker KMG10 10-Inch (25cm) Grille for KM10 and KMF10 Subwoofer, LED, Charcoal, and a Kicker 48KXMA8008 KXMA800.8 8X100w 8-Ch Full-Range Class-D Marine Amplifier.
3x Kicker 48KMXL65 6.5" 4-Ohm RGB-LED KMXL Horn-Loaded Marine Coaxial Speakers, Pair (48KMXL654)
Kicker 48KMXL65 6.5" 4-Ohm RGB LED KMXL Horn-Loaded Marine Coaxial Speakers, Pair
The music on your cruise should stir the soul. KMXLs are crystal clear and loud, adding powerful sound to your adventure.
Shallow and Heavy-Duty
The KMXL series builds upon the success of KICKER Marine Audio’s KMTC and KMFC Horn-Loaded Tower Systems, widely recognized in the marine industry as the new standard in HLCD (horn-loaded compression driver) tower-speaker design. They bring much of this same technology to loudspeakers shallow enough to be installed in traditional coaxial-speaker mounting locations, and heavy-duty enough to install into KM-Series Empty Enclosures.
Incredibly Smooth and Loud
A proprietary high-frequency horn design gives the KMXL series sonic performance that is incredibly smooth and easy to listen to, even at extremely high volumes.
Choice of Grille Color or LEDs
KMXL speakers come with both charcoal and white UV-treated grilles and incorporate RGB LED lighting. With the addition of an RGB LED controller, like the Kicker KMLC or others, you can have endless color options and patterns.
Features
Bold look. Exceptional Sound.
KMXLs utilize a high-output design that plays above wind, water and engine noise.
- Shallow enough for traditional speaker hole cutouts
- Marine-grade, horn-loaded compression speakers
- Proprietary high-frequency horn design
- Motor include lightweight neodymium magnets and aluminum-dome tweeters
- UV-treated, waterproof poly/carbon-fiber woofer cones
- Integrated multi-color LED lighting (add an LED controller for additional functionality)
- KICKER Real Marine™ grade for years of use in a boat
- Can be installed in KM-Series Empty Enclosures
Specifications
- Woofers (in,mm) - 6-1/2, 160
- Tweeters (in,mm) - 1-1/4, 32
- Tweeter Dome Material - Aluminum
- Rated Impedance (Ω) - 4
- Rec. Amplifier Power (watts RMS) - 15-150
- Peak Power Handling (watts) - 300
- Sensitivity(1W,1m) - Open air
- Frequency Response(Hz) - 90-20k
- Mounting Hole Diameter(in,mm) - 5-7/16, 139
- Mounting Depth(in,mm) - 3-3/16, 81
- Grilles - Both White & Charcoal
- Crossover (rec. for max power handling) - 12dB/octave, 80Hz high pass
1x Kicker KMF10 10-inch (25cm) Weather-Proof Subwoofer for Freeair Applications, 4-Ohm (45KMF104)
The KICKER® KMF Marine Subwoofer makes serious bass without a dedicated enclosure! Made to take the power and the weather, this sub is custom made to bring the bass on your boat.
Completely weather-resistant, these marine subs are real-world tested for salt/fog and UV exposure, meeting or exceeding ASTM standards for marine durability.
A completely sealed motor structure and locking/sealed terminal cover make it splash-proof for long life, while a tough Santoprene® surround and marine-grade polypropylene cone pump out the bass, no matter how long or loud the party lasts.
Packed with features and made for specifically for marine use, KICKER gives you the deep, loud bass your boat needs.
FEATURES
Four-Ohm Voice Coil
Injection-Molded Polypropylene Cone
Co-molded Santoprene® Surround
UniPlate™ Back Plate And Pole Piece
Thick Tinsel Leads
Large Ceramic Magnet
Rear Gasketing Included
Polymer Basket Resists Corrosion
Protective Terminal Cap
Stainless Mounting Hardware Included
Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
Specifications
Woofer(in,mm)
10, 25
Impedance (OHMS)
4 SVC
Peak Power Handling(Watts)
350
Continuous Power Handling(Watts RMS)
175
Sealed Enclosure Volume Min-Max(ft³, L)
1-2.4, 28.3-68
Vented Enclosure Volume Min-Max(ft³, L)
1.25-1.75, 35.4-49.6
Frequency Response(Hz)
30-500
Mounting Depth(in, cm)
5, 12.7
Hole Diameter(in, cm)
9-3/16, 23.2
Outer Diameter(in, cm)
10-11/16, 27.1
What's in the Box:
1 - 10" Woofer
1 - Back gasket
8 - Mounting screws
8 - Mounting screw clips
1 - Manual
1x Kicker KMG10 10-Inch (25cm) Grille for KM10 and KMF10 Subwoofer, LED, Charcoal (45KMG10C)
Perfect for KM or KMF 10-inch Subwoofer, these LED-equipped grilles are molded from thick ABS plastic.
Perfect for fresh and salt water, these waterproof grilles provide years of protection for your bass, while thick silicone-coated LEDs give your boat an added flair! Add the KMLC LED Controller (sold separately) for 20 total colors and 19 different lighting modes to make it even more fun!
Specifications
What's in the Box:
1 - 10" charcoal subwoofer grille
Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
1x Kicker 48KXMA8008 KXMA800.8 8X100w 8-Ch Full-Range Class-D Marine Amplifier (48KXMA8008)
Kicker KXMA800.8 8X100w 8-Ch Full-Range Class-D Marine Amplifier - 48KXMA8008
Kicker gives you a full suite of purpose-built KXMA-Series Marine Amplifiers, all built to deliver the volume and clarity you need on the water. Following Kicker Real Marine protocol, power terminals meet stringent ABYC/NMMA standards, while thick gasketing protects the control cover from unwanted moisture. Even the aluminum chassis is UV-treated for extra-long life. All Kicker marine amplifiers also utilize conformal-coated circuit boards to protect the heart of the amp from water damage. Get the absolute most out of your amp with a specially designed gain control that lights up when the perfect input signal is detected from your radio.
Features -
• 800.8 8-Channel Adds a Possible Four Full-Range Zones for an Entire Install with a Single Amp
• Conformal-Coated Circuit Boards to Repel Moisture
• 316L Stainless-Steel, No-Rust Hardware
• Small Footprint to Tuck Out of the Way
• 0-6dB Variable Bass Boost
• Marine-Compliant Terminals
• Built-In Variable Crossovers for Precise Speaker Performance Matching
• Designed to Add Extra Intensity to a Large System, or Power HighEnd Tower Speakers
• Marine Environment Ready
• Highly Efficient Class D Technology
• Superior Sound Quality and Added Power
Specifications -
• Power [watts/ch] 2 Ohm Stereo: 100x8
• Power [watts/ch] 4 Ohm Stereo: 50x8
• Power [watts/ch] 4 Ohm Bridged Mono: 200x4
• Dynamic Power [watts] 1200
• Frequency Response [Hz]: 10-20k
• Crossover: OFF/HP/LP (amp 1 and 2), variable 10-5kHz w/ 10x switch; OFF/HP/LP/BP (amp 3 and 4), variable HP 10-500Hz, variable LP 40-5kHz w/ 10x switch; 24dB/octave
• KickEQ+ Bass Boost: variable 0-6dB @ 40Hz [amp 1, 2, 3 and 4]
• Dimensions: H – 2-1/8, 5.5; W – 8-5/16, 21; L - 14-3/4, 37.4