Description
Included in this kit
This bundle includes a Kicker 48TRTP122 12" Thin Down-Firing Subwoofer w/ Passive Radiator Enclosure, 2-Ohm, a Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp, and a Kicker 47VK6 VK6 6AWG Complete Amplifier Wiring Kit w/2CH Interconnects.
1x Kicker 48TRTP122 12" Thin Down-Firing Subwoofer w/ Passive Radiator Enclosure, 2-Ohm (48TRTP122)
Kicker TRTP 12-inch Thin Down Firing Subwoofer and Passive Radiator Enclosure, 2-Ohm - 48TRTP122
The new CompRT Down-Firing Subwoofer Enclosures make surprisingly strong, smooth bass in a box under seven inches deep. Heat is the enemy of endurance. To make Kicker subs even more reliable, KICKER engineers developed Forced-Air Cooling to help Kicker CompRT subs run 20 percent cooler.Heat is the enemy of endurance. To make Kicker subs even more reliable, KICKER engineers developed Forced-Air Cooling to help Kicker CompRT subs run 20 percent cooler. Place the TRTP under your truck seat or cargo area for great bass – no grille needed! Covered in stylish black carpeting and built with thick MDF, these tough enclosures take serious power without taking up needed space.
Features -
• Thin-Mount CompRT Active Sub
• Internally Braced Enclosure Provides Ultimate Protection
• High-Output ReFLEX Passive Woofer Boosts Output
• Factory-Optimized Enclosure for Big Bass
• Resists Stacking Weight, Nicks or Scratches
• Extremely Compact Design with Drivers Hidden, Becoming a Part of the Vehicle’s Makeup
• True, Hard-Hitting KICKER Bass from a Shallow-Mount Design
• New CompRT Features Forced-Air Cooling - 20% Cooler for Increased Reliability
• High-Output ReFLEX Passive Woofer Intensifies Bass Output
• Easily Mounts in Cargo Area, with No Space Issues
Specifications -
• Woofer Size [in, cm] - 12, 30
• Impedance [Ohms DVC] - 2
• Rec. Amplifier Power [watts RMS] - 500
• Peak Power Handling - 1000
• Frequency Response [Hz] - 25-500
• Height Installed [in, cm] - 6-1/8, 15.6
• Width [in, cm] - 14-5/8, 37
• Length [in, cm] - 27-1/2, 70
1x Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp (46CXA4001T)
Kicker 46CXA4001 CX400.1 400 Watt RMS 1-Ohm Stable Mono Amplifier
Using a Class-D power plant, the CXA400.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 400 watts into one bass channel. See below for more details.
Features:
• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look
Specifications:
• MODEL - CXA400.1
• Power (watts/ch) 4 Ohm - 150x1
• Power (watts/ch) 2 Ohm - 300x1
• Power (watts/ch) 1 Ohm - 400x1
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 8-1/8, 20.6
• Frequency Response (Hz): - 25-200, +0/-1dB
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - >95dB, a-weighted, re: rated power
• Active Crossover: - Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: - 25Hz @24dB/octave
• KickEQ™ Boost - Variable 0-6dB @40Hz
1x Kicker 47VK6 VK6 6AWG Complete Amplifier Wiring Kit w/2CH Interconnects (47VK6)
Kicker VK6 6AWG Complete Amplifier Wiring Kit w/2CH Interconnects - 47VK6
Kicker V-Series Amplifier Wiring Kits -
• Top-Quality, Full-Spec, Hyper-Flex Power, Ground and Turn-On Cables
• K-Series Speaker Wire and Interconnect Cables
• Heavy-Duty AFS Fuse Holder and Fuse
• Insulated Crimp Connectors, Zip Ties and other Hardware
• One Convenient Kit with Everything that You Need
• All Cables are made with Pure OFC for Max Power Transfer and Superior Clarity
• Additional Year of Warranty When Purchased with a KICKER Amp
In the box -
• 17 ft 6 AWG red power wire
• 4 ft 6 AWG gray ground wire
• Fuse holder with 80 amp fuse
• 17 ft remote wire
• 16.4 ft RCAs
• 12 ft speaker wire
• 6 6" zip ties
• 6 AWG firewall grommet
• 1x butt connector
• 4x fork terminals
• 1x red fork terminal boots
• 1x black fork terminal boots