Description
Included in this kit
This bundle includes a Kicker 47KMPK4 Marine 4awg Amp Power Kit, 2x Kicker KM8 8-Inch (200mm) Marine Coaxial Speakers with 1-Inch (25mm) Tweeters, LED, 4-Ohm,Charcoal and White Grilles, and a Kicker 48KXMA8004 KXMA800.4 4x200w 4-Ch Full-Range Class-D Marine Amplifier.
1x Kicker 47KMPK4 Marine 4awg Amp Power Kit (47KMPK4)
Kicker 47KMPK4 Marine 4awg Amp Power Kit
Ready-Made Power
The kit comes complete with fuse, fuse holder, power and ground cabling plus remote wire - all made to our stringent marine specs!
Full-spec OFC cable tinned in anti-corrosive nickel
All-in-one solution for power delivery
MRBF marine fuse included
Meets the highest industry standards for marine use
What's included?
20 ft 4 awg red power wire with 5/16” tin plated ring terminal insulated with marine grade heat shrink for corrosion resistance.
20 ft 4 awg yellow ground wire with 5/16” tin plated ring terminal insulated with marine grade heat shrink for corrosion resistance.
20 ft 18ga blue remote wire.
1 KMFMF marine rated battery fuse holder.
1 MRBF100 – 100A marine rated batter fuse.
2 18ga fork terminals with blue boots.
20x 6” zip ties
2x Kicker KM8 8-Inch (200mm) Marine Coaxial Speakers with 1-Inch (25mm) Tweeters, LED, 4-Ohm,Charcoal and White Grilles (45KM84L)
Loud and clear, the KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles!
LIGHT IT UP
Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
Four-Ohm Voice Coil
One-Inch Titanium Tweeter
UV-Treated Polypropylene Woofer With Santoprene® Surround
UV-Resistant Polymer Basket
Locking/Sealed Terminal Cover
Sealed Motor Structure
316L Stainless Mounting Hardware Included
White and Charcoal Grilles With Seven-Color LED System Included*
Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure***
**ASTM B117 200 hr. Salt Fog Test
***ASTM G154 400 hr. Accelerated UV Test
*Upgradable to 20 Colors and 19 Lighting Modes with KMLC (Sold Seperately)
This KM Eight-Inch Coaxial Speaker works best with 150 watts of recommended power.
Specifications
Woofer(in,mm) - 8, 200
Tweeter(in,mm) - 1, 25
Tweeter Dome Material - Titanium
Rated Impedance(Ω) - 4
Peak Power Handling(Watts) - 300
Continuous Power Handling(Watts RMS) - 150
Sensitivity(1W,1m) - 92
Frequency Response(Hz) - 30-21k
Mounting Hole Diameter(in,mm) - 6-11/16, 170
Mounting Depth(in,mm) - 3-3/4, 82
LED Lighting - Yes
Grilles - Charcoal and White
Due to continual development, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
1x Kicker 48KXMA8004 KXMA800.4 4x200w 4-Ch Full-Range Class-D Marine Amplifier (48KXMA8004)
Kicker KXMA800.4 4x200w 4-Ch Full-Range Class-D Marine Amplifier - 48KXMA8004
Kicker gives you a full suite of purpose-built KXMA-Series Marine Amplifiers, all built to deliver the volume and clarity you need on the water. Following Kicker Real Marine protocol, power terminals meet stringent ABYC/NMMA standards, while thick gasketing protects the control cover from unwanted moisture. Even the aluminum chassis is UV-treated for extra-long life. All Kicker marine amplifiers also utilize conformal-coated circuit boards to protect the heart of the amp from water damage. Get the absolute most out of your amp with a specially designed gain control that lights up when the perfect input signal is detected from your radio.
Features -
• Conformal-Coated Circuit Boards to Repel Moisture
• 316L Stainless-Steel, No-Rust Hardware
• Small Footprint to Tuck Out of the Way
• 0-6dB Variable Bass Boost
• Marine-Compliant Terminals
• Built-In Variable Crossovers for Precise Speaker Performance Matching
• Designed to Add Extra Intensity to a Large System, or Power HighEnd Tower Speakers
• Marine Environment Ready
• Highly Efficient Class D Technology
• Superior Sound Quality and Added Power
Specifications -
• Power [watts/ch] 2 Ohm Stereo: 200x4
• Power [watts/ch] 4 Ohm Stereo: 100x4
• Power [watts/ch] 4 Ohm Bridged Mono: 400x2
• Dynamic Power [watts] 1100
• Frequency Response [Hz]: 10-20k
• Crossover: OFF/HP/LP [amp 1], variable 10-5kHz w/ 10x switch; OFF/HP/LP/BP [amp 2], variable HP 10-500Hz; variable LP 40-5kHz w/ 10x switch; 24dB/octave
• KickEQ Bass Boost: variable 0-6dB @ 40Hz
• Dimensions: H – 2-1/8, 5.5; W – 8-5/16, 21; L - 11-9/16, 29.4