Description
Included in this kit
This bundle includes a Kicker 52CVT102 CVT10 CompVT 10-Inch (24cm) Subwoofer, 2 Ohm SVC, and a Kicker 52GR10 10 Inch Speaker Grille.
1x Kicker 52CVT102 CVT10 CompVT 10-Inch (24cm) Subwoofer, 2 Ohm SVC (52CVT102)
The CompVT 10-Inch Subwoofer is available as a 2Ω slimline driver.
New and improved, precise KICKER engineering allows the CompVT to pound with limited space. A proprietary four-layer voice coil collaborating with SoloKon™ cone technology, provides the ability to work with serious amounts of power without the bulk of a standard subwoofer.
The CompVT Subwoofer works best with a sealed or ported enclosure for its substantial power handling.
Specifications
SIZE [in, cm]: 10, 25
IMPEDANCE [Ohms]: 2 SVC
Recommended Amplifier Power (watts RMS) 180-375
Peak Power (watts, per ANSI/CTA-2031-A) 750
SENSITIVITY [dB 1w/1m]: 87.2
MOUNTING DEPTH [in, cm]: 4-1/4, 10.8
MOUNTING DIAMETER [in, cm]: 9-3/16, 23.3
MIN SEALED BOX VOL [cu. ft, L]: 0.8, 22.5
MAX SEALED BOX VOL [cu. ft, L]: 3, 85
MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4
MAX VENTED BOX VOL [cu. ft, L]: 1.75, 49.6
Thiele/Small Parameters
Re: 2.675 Ohm
Krm: 0.00185 Ohm
Erm: 0.995
Kxm: 0.02575 Ohm
Exm: 0.78
Cmes: 849.94
Lces: 20.055
Res: 37.375 Ohm
fs: 38.6 Hz
Mms: 144.4155 g
Mmd (Sd): 136.4885 g
Rms: 4.5485 kg/s
Cms: 0.118 mm/N
Kms: 8.485 N/mm
Bl: 13.0385 Tm
Qtp: 0.764 total Q-factor considering all losses
Qms: 7.6925 mechanical Q-factor of driver in free air considering Rms only
Qes: 0.7565 electrical Q-factor of driver in free air considering Re only
Qts: 0.689 total Q-factor considering Re and Rms only
Vas: 22.4299 I
n0: 0.1635 reference efficiency (2 pi-radiation using Re)
Lm: 84.33 dB characteristic sound pressure level (SPL at 1m for 1W @ Re)
Lnom: 84.7 dB nominal sensitivity (SPL at 1m for 1W @ Zn)
Sd: 366.44 cm² diaphragm area
Xmax: 13 mm
1x Kicker 52GR10 10 Inch Speaker Grille (52GR10)
Steel Mesh
Try this refined, clean look on all sizes of your square or round subs. Use them also with CompQ or SoloX L7X subwoofers, 3-D printing the necessary spacers using the provided template files.
(fits L7T, CompR, CompRT, CompVR, CompVT and CompC; also fits L7S, L7R, CompVX and Comp with some cosmetic concessions.)
Round Mesh
Protect your KICKER subs with tough steel mesh.